Individually addressable submicron scale light-emitting devices based on electroluminescence of solid Ru(bpy)3(ClO4)2 films

A submicron light-emitting device (LED) was fabricated from lithographically fabricated parallel indium-tin oxide (ITO) finger electrodes (0.9 mum wide) separated by a 1.1 mum gap. A single layer of an amorphous (a) Ru(bpy)3(ClO4)2 film ( approximately 100 nm thick) was spin-coated on the electrode array. Ga:In or carbon paste was employed as a liftable upper contact electrode. Films ( approximately 1.5 mum thick) of single-crystal Ru(bpy)3(ClO4)2 (xyl) between two ITO electrodes in a sandwich cell were also prepared and produce electroluminescence. As with larger cells of this type, the high-resolution electroluminescence produced showed a high external efficiency ( approximately 3.4%), a low turn-on voltage (2.3 V), and reasonable stability. The single-crystal cells also behaved as photovoltaic devices and a short-circuit photocurrent was observed when they were irradiated without a bias voltage.     

The carbocyclic analog of cytidine,synthesis and antineoplastic activity

The carbocyclic analog (VI) of cytidine was prepared from the carbocyclic analog (I) of uridine. The intermediate stages were a tetrabenzoyl derivative of I, the tribenzoyl derivative of the uridine analog, and the tribenzoyl 4-chloropyrimidinone obtained from the latter derivative. The cytidine analog (VI) is active against KB cells in culture and against L1210 leukemia in mice. In the initial tests against L1210 leukemia, the highest dose (200 mg./kg./day, q.d. 1-9), of three active doses, increased lifespan by 82% and showed no evidence of toxicity.     

Destruction of carbonyl and hydroperoxide groups in oxidised polypropylene: Effect on photo-oxidation

The effect of destroying carbonyl and hydroperoxide groups in oxidised polypropylene on the subsequent rate of photo-oxidation has been examined using infra-red spectroscopy. The results show that carbonyl groups dominate the rate of photo-oxidation in severely oxidised polymer. In mildly oxidised polymer hydroperoxide groups control the rate, but to a much smaller extent. Destruction of the photo-active carbonyl and hydroperoxide groups in the unoxidised and oxidised polymers by prior photolysis in an inert atmosphere gave rise to some interesting and complex effects on subsequent photo-oxidation. The results indicate that although carbonyl and hydroperoxide groups may control the rates of photo-oxidation of thermally oxidised/processed polymer, their importance as primary photo-initiators is highly questionable. Oxygen-polymer charge transfer complexes appear to be the more likely photo-initiators.     

Effect of photochemical oxidation on polypropylene phosphorescence

Phosphorescence from polyolefins was studied from the aspects of excitation and emission wavelength and lifetime. Effects of photochemical oxidation on polypropylene phosphorescence are discussed in contrast to the effects of thermal oxidation.     

EVENTS SURROUNDING THE EARLY DEVELOPMENT OF EUGLENA CHLOROPLASTS. 12. SPECTROSCOPIC EXAMINATION OF THE PROTOCHLOROPHYLL(IDE) PHOTOTRANSFORMATION IN INTACT CELLS*

Abstract— Absorption measurements in the 600–720 nm region of dark-grown cells of Euglena gracilis Klebs var. bacillaris Cori were made in vivo at room temperature using computer-assisted spectrophotometry. Dark-grown wild-type cells have a prominent absorption maximum at 634 nm due to protochlorophyll(ide) absorption. Upon illumination, the absorption at 634nm decreases and a peak appears at 674nm, representing the phototransformation of protochlorophyll(ide) to chlorophyll(ide). Using difference spectroscopy, the resynthesis in the dark of protochlorophyll(ide) by previously-illuminated wild-type dark-grown cells was found to begin at about 10min after illumination and reached completion by about 25 min, the amount of protochlorophyll(ide) resynthesized being equivalent to that of dark-grown cells. Resynthesis of protochlorophyll(ide) following a second illumination follows the same kinetics, indicating that protochlorophyll(ide) resynthesis is under tight regulation, possibly via feedback control. Cells of dark-grown wild-type and W₃BUL, a mutant lacking protochlorophyll(ide) contain a component absorbing at 658 nm which does not undergo phototransformation when examined by difference spectroscopy at room and liquid N₂ temperatures. Following the phototransformation of protochlorophyll(ide) 634 to chlorophyll(ide) 674, the chlorophyll(ide) 674 shifts to shorter wavelengths, ultimately to 671 nm. Possible relationships among the various spectroscopic forms of protochlorophyll(ide) and chlorophyll(ide) at room temperature and liquid N₂ temperature in Euglena and higher plants are presented. It is concluded that Euglena, unlike older, etiolated higher plants, contains only protochlorophyll(ide) 634, making it an excellent system in which to examine the phototransformation of this pigment species in the absence of other forms.     

Flow Past a Swept Wing with a Compliant Surface: Stabilizing the Attachment-Line Boundary Layer

Many aquatic species such as dolphins and whales have fins, which can be modeled as swept wings. Some of these fins, such as the dorsal fin of a dolphin, are semi-rigid and therefore can be modeled as a rigid swept wing with a compliant surface. An understanding of the hydrodynamics of the flow past swept compliant surfaces is of great interest for understanding potential drag reduction mechanisms, especially since swept wings are widely used in hydrodynamic and aerodynamic design. In this paper, the flow past a swept wing with a compliant surface is modeled by an attachment-line boundary layer flow, which is an exact similarity solution of the Navier–Stokes equations, flowing past a compliant surface modeled as an elastic plate. The hydrodynamic stability of the coupled problem is studied using a new numerical framework based on exterior algebra. The basic instability of the attachment line boundary layer on a rigid surface is a traveling wave instability that propagates along the attachment line, and numerical results show that the compliance results in a substantial reduction in the instability region. Moreover, the results show that, although the flow-field is three-dimensional, the qualitative nature of the instability suppression is very similar to the qualitative reduction of instability of the two-dimensional Tollmien–Schlichting modes in the classical boundary-layer flow past a compliant surface.     

Speeding up the FMMR perfect sampling algorithm: A case study revisited

In a previous paper by the second author, two Markov chain Monte Carlo perfect sampling algorithms—one called coupling from the past (CFTP) and the other (FMMR) based on rejection sampling—are compared using as a case study the move‐to‐front (MTF) self‐organizing list chain. Here we revisit that case study and, in particular, exploit the dependence of FMMR on the user‐chosen initial state. We give a stochastic monotonicity result for the running time of FMMR applied to MTF and thus identify the initial state that gives the stochastically smallest running time; by contrast, the initial state used in the previous study gives the stochastically largest running time. By changing from worst choice to best choice of initial state we achieve remarkable speedup of FMMR for MTF; for example, we reduce the running time (as measured in Markov chain steps) from exponential in the length n of the list nearly down to n when the items in the list are requested according to a geometric distribution. For this same example, the running time for CFTP grows exponentially in n. © 2003 Wiley Periodicals, Inc. Random Struct. Alg., 2003