Copolymerization parameters of methyl methacrylate and acrylic acid

The relative reactivity of acrylic acid is known to be influenced by the polymerization medium. Nonetheless, the more commonly used reactivity ratios do not show this dependence because they were calculated from low-conversion polymerizations. We have studied the copolymerization of acrylic acid and methyl methacrylate in a number of non-hydrogen-bonding and hydrogen-bonding solvents. We found that the acrylic acid fraction in the copolymer was larger when copolymerized in a non-hydrogen-bonding medium and that the methyl methacrylate fraction was larger when copolymerized in a hydrogen-bonding medium. The precise reactivity ratios were reported when toluene, benzene, isopentyl, acetate, ethyl acetate, methyl formate, and tert-butyl alcohol were used as the polymerization medium. The values were obtained by chromatographic analysis of residual monomer, followed by computation based on the nonlinear, least-squares technique of Tidwell and Mortimer.     

Theoretical study of single-electron capture in He2+ —H− collision

We present a detailed theoretical treatment of single-electron transfer between He²⁺ and H^?. The total cross section is calculated using stationary molecular states which are appropriate in the energy range covered by the experiments (between 0.5 and 2250 eV in the centre of mass frame). We use an expansion on a two-electron basis built with one-electron diatomic molecule (OEDM) orbitals and including the common translation factor of Errea et al. All coupling terms are calculated explicitly. Because of the small binding energy of H^? compared to that of the ground state of He⁺, capture occurs into highly excited states of He⁺. Results obtained with a straight-line quasiclassical calculation are in good agreement with the experimental data. At low energy, He⁺ (n=5) +H(1s) is the dominant capture channel; at higher energy, the He⁺ (n=4) + H(1s) channel becomes important. The rise in the cross section below 6 eV can be attributed to the Coulomb attraction in the incoming channel. To account for this effect, a fully quantal calculation has been performed. The agreement with the low-energy measurements is then excellent.     

Elevated-temperature metathesis syntheses of structurally novel alkali-metal tetrakis(3,5-di-tert-butylpyrazolato)lanthanoidate(III) complexes: toluene-coordinated discrete bimetallic complexes and supramolecular chains

Sodium and potassium tetrakis(3,5-di-tert-butylpyrazolato)lanthanoidate(III) complexes [M[Ln(tBu(2)pz)(4)]] have been prepared by reaction of anhydrous lanthanoid trihalides with alkali metal 3,5-di-tert-butylpyrazolates at 200-300 degrees C, and a 1,2,4,5-tetramethylbenzene flux for M=K. On extraction with toluene (or occasionally directly from the reaction tube) the following complexes were isolated: [Na(PhMe)[Ln(tBu(2)pz)(4)]] (1 Ln; 1 Ln=1 Tb, 1 Ho, 1 Er, 1 Yb), [K(PhMe)[Ln(tBu(2)pz)(4)]].2 PhMe (2 Ln; 2 Ln=2 La, 2 Sm, 2 Tb, 2 Ho, 2 Yb, 2 Lu), [Na[Ln(tBu(2)pz)(4)]](n) (3 Ln; 3 Ln=3 La, 3 Tb, 3 Ho, 3 Er, 3 Yb), [K[Ln(tBu(2)pz)(4)]](n) (4 Ln; 4 Ln=4 La, 4 Nd, 4 Sm, 4 Tb, 4 Ho, 4 Er, 4 Yb, 4 Lu), with the last two classes generally being obtained by loss of toluene from 1 Ln or 2 Ln, and [Na(tBu(2)pzH)[Ln(tBu(2)pz)(4)]].PhMe (5 Ln; 5 Ln=5 Nd, 5 Er, 5 Yb). Extraction with 1,2-dimethoxyethane (DME) after isolation of 2 Ho yielded [K(dme)[Ho(tBu(2)pz)(4)]] (6 Ho). X-ray crystal structures of 1 Ln (=1 Tb, 1 Ho; P2(1)/c), 2 Ln (=2 La, 2 Sm, 2 Tb, 2 Yb, 2 Lu; Pnma), 3,4 Ln (=3 La, 3 Er, 4 Sm; P2(1)/m), and 5 Ln (=5 Nd, 5 Er, and 5 Yb; P1) show each group to be isomorphous regardless of the size of the Ln(3+) ion. All complexes contain eight-coordinate [Ln(eta(2)-tBu(2)pz)(4)] units. These are further linked to the alkali metal by bridging through two (1,2,5 Ln) or three (3,4 Ln) tBu(2)pz groups which show striking coordination versatility. Sodium is coordinated by an eta(4)-PhMe, a micro-eta(2):eta(2)-tBu(2)pz, and a micro-eta(4)(Na):eta(2)(Ln)-tBu(2)pz ligand in 1 Ln, and by one eta(1)-tBu(2)pzH and two micro-eta(3)(Na):eta(2)(Ln) ligands in 5 Ln. By contrast, potassium has one eta(6)-PhMe and two micro-eta(5)(K):eta(2)(Ln) ligands in 2 Ln. Classes 3,4 Ln form polymeric chains with the alkali metal bonded by two micro-eta(3)(NNC-M):eta(2)(Ln)-tBu(2)pz ligands within [MLn(tBu(2)pz)(4)] units which are joined together by eta(1)(C)-tBu(2)pz-Na, K linkages.     

Synthetic, structural and spectroscopic studies of (pseudo)halo(1,3-di-tert-butylimidazol-2-ylidine)gold complexes

A series of (pseudo)halo(1,3-di-tert-butylimidazol-2-ylidine)gold complexes [(But2Im)AuX](X = Cl, Br, I, CN, N3, NCO, SCN, SeCN, ONO2, OCOCH3, CH3) have been synthesized and characterised spectroscopically and structurally. 13C NMR chemical shifts for the carbene carbon vary widely with differing ancillary anion, correlating well with the sigma-donor ability of the latter and with the M-C(carbene) bond distance. These results reinforce the notion that N-heterocyclic carbene ligands are primarily sigma-donor ligands with little pi-acceptor ability.     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

Topography of the potential energy hypersurface and criteria for fast-ion conduction in perovskite-related A2B2O5 oxides

We discuss the importance of the topography of the potential energy hypersurface for the ionic conductivity of perovskite-related A(2)B(2)O(5) oxides. A correlation between the energetic preference of the cations for different coordination geometries and the ionic conductivity is proposed based on a first principles periodic density functional theory study of selected possible structures for Ba(2)In(2)O(5), Sr(2)Fe(2)O(5), Sr(2)Mn(2)O(5), and La(2)Ni(2)O(5). There are a large number of low-energy local minima on the potential energy hypersurfaces of the two first compounds due to an energetic preference for BO(4) tetrahedra. Tetrahedral environments are energetically unfavorable for Mn(III) in Sr(2)Mn(2)O(5) and for Ni(II) in La(2)Ni(2)O(5), and the number of low-energy configurations is relatively low in these two cases. Consistent with our findings, in contrast to Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5), Sr(2)Mn(2)O(5) and La(2)Ni(2)O(5) do not exhibit transitions to disordered phases on heating, and there appear to be no reports of enhanced ionic conductivity for these compounds. Thus we suggest that the possibility of many different oxygen orderings associated with a variety of low-energy connectivity schemes within tetrahedral layers such as in the brownmillerite-based structures of Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5) is a prerequisite for high ionic conductivity in perovskite-related A(2)B(2)O(5) oxides.     

Cyclophosphamides from aminosugars and aminonucleosides

Condensation of bis-(2-chloroethyl)phosphoramidic dichloride with 3′-amino-3′-deoxy-N,N-dimethyladenosine afforded the 2′,3′-cyclicphosphorodiamidate (III). By an improved synthesis, methyl 3-amino-3-deoxy-β-D-ribofuranoside was obtained as a model compound for conversion to the analogous 2,3-cyclicphosphorodiamidate (XII). Existence of the latter as two diastereomers due to phosphorus asymmetry was shown by nmr analysis, using comparison with the 5-(O-p-nitrobenzoate) (XIII) as a basis for assignments.     

Preparation of a thermally phase-separating copolymer,poly(N-isopropylacrylamide-co-N-acryloxysuccinimide), with a controlled number of active esters per polymer chain

N-isopropylacrylamide and N-acryloxysuccinimide have been copolymerized in various mixtures of terrahydrofuran and toluene using azobisisobutyronitrile as initiator. Polymerization has been conducted for 24 h at 50°C under a slightly positive pressure of nitrogen. The copolymers were assayed for active ester content by measuring the UV absorbance (259 nm) of N-hydroxysuccinimide anion, generated by reacting the copolymers with N-isopropylamine in dimethylformamide and dissolving the resulting mixture in 0.1M HEPES buffer, pH 7.5. The molecular weight and its distribution have been estimated by gel permeation chromatography. The active ester content was found to be equivalent to the comonomer feed ratio, and the major factor controlling the molecular weight was the ratio of tetrahydrofuran to toluene. Thus, the number of active esters per polymer chain could be controlled by adjustment of the comonomer feed ratio and the ratio of tetrahydrofuran to toluene. Monomer reactivity ratios for copolymerization of N-isopropylacrylamide with N-acryloxysuccinimide were also estimated. These copolymers are useful for immobilizing binding ligands such as antibodies for subsequent thermally induced precipitation immunoassays and bioseparation processes.