Intramolecular nucleophilic activation promoting efficient hydrolytic cleavage of DNA by (aqua)bis(dipyridoquinoxaline)copper(II) complex

The axial aqua bound copper(II) complex [Cu(dpq)2(H2O)](ClO4)2, having a planar NN-donor heterocyclic base dipyridoquinoxaline (dpq) as the DNA minor groove binder, shows efficient hydrolytic cleavage of supercoiled DNA in the dark and in the absence of any external reagents, as evidenced from T4 ligase experiments, with a rate of 5.58 +/- 0.4 h(-1) and a rate enhancement of 1.55 x 10(8).     

Synthesis and spectral studies of novel copper(II) chelates of sulphur-containing oximes

Summary Copper complexes of benzil--monoxime-2-iminoethanethiol (BMETH₂), benzil--monoxime-2-iminobenzenethiol (BMBTH₂), benzil--monoximethiosemicarbazone (BMTH₂) and benzil--monoximesemicarbazone (BMSH₂) were synthesized and characterized by physicochemical and spectroscopic measurements. The molar conductivities show that all of the complexes are nonelectrolytes. The i.r. spectra suggest that the ligands are tetradentate in all cases, whilst the electronic spectra suggest planar geometries for all the complexes. The calculated e.s.r. parameters show an axial dx ² - y ² ground state and suggest coordination through sulphur, in agreement with the i.r. results. In all of these complexes, the =N—;O group acts as a bridging function to give dimeric structures.     

Novel Synthesis of Mafenide and Other Amino Sulfonamides by Electrochemical Reduction of Cyano Sulfonamides

Both aliphatic and aromatic amino sulfonamides such as mafenide ( 1a ) were synthesized in good yields (80–86%) by direct electrochemical hydrogenation of the corresponding nitriles in an undivided cell containing a Ni cathode, a Pt anode, and Raney Ni as catalyst (Table 1). The reaction can be performed without external supply of pressurized gas by in situ generation of H₂. Slightly elevated temperatures (45°) and low current densities (10 mA/cm²) are favorable conditions for this type of electrochemical nitrile hydrogenation. Our synthetic protocol does not require high‐pressure equipment or chemical hazards, is environmentally very friendly, and more economical than traditional methods. The concentration of adsorbed H^. radicals on the catalyst surface can be easily controlled by adjusting the electric potential, which may lead to improved product selectivity and, at the same time, reduces the risk of explosion and fire.     

One-pot synthesis of 1-aryl-3-methyl-1,3-dienes using methallyl(trimethyl)silane and aldehydes and their low temperature (Z)→(E) isomerization induced by sulfur dioxide

2-Methylprop-2-ene-1-sulfonyl fluorides can be easily prepared via the ene reaction of methallylsilanes and SO₂. In the presence of a base, aldehydes and 2-methylprop-2-ene-1-sulfonyl fluorides give 1,3-(E) and (Z)-dienes. Their (Z)→(E) isomerization by classical means fails or leads to their polymerization. It is shown that SO₂ can isomerize 1-aryl-3-methyl-1,3-dienes at low temperature, without formation of sulfolenes (cheletropic addition/elimination). Preliminary mechanistic studies suggest that SO₂ adds to 1,3-dienes forming 1,4-diradical intermediates that are responsible for the (Z)→(E) isomerizations.     

Spectrophotometric determination of cobalt(II) in the presence of large amounts of iron with salicylaldehyde thiosemicarbazone

Cobalt(II) reacts instantaneously with the reagent at pH 5.0. The yellow complex has a molar absorptivity of 1.1 × 10⁴ 1 mol^?1 cm^?1. The method is applied to the determination of cobalt in steels after removal of iron with phosphate.     

Precipitation of zinc ammonium phosphate from homogeneous solution

Urea hydrolysis has been employed to raise the pH for homogeneous precipitation of zinc ammonium phosphate. From 30 to 100 mg of zinc can conveniently be determined by this technique (relative standard deviation 0.2% for 89 mg). The interference of nickel was minimized by using ammonium tartrate as masking agent, but copper could not be effectively masked with the same tartrate. Ammonium tartrate obtained from a different source was found to mask the copper more effectively. Investigations showed that the latter tartrate contained an appreciable amount of ammonium oxalate.     

Direct spectrophotometric method for the determination of cobalt with indane 1,2,3-trionetrioxime in aqueous medium

A simple, sensitive and selective Spectrophotometric method has been developed for the determination of cobalt using indane 1,2,3-trionetrioxime (ITT): The method is based on the colour reaction between ITT and cobalt(II) in sodium acetate-acetic acid buffer (pH 4.5–7.5) medium. The calibration graph for measurement at 320 nm is linear in the range 1.18–23.60g of cobalt per 25 ml, with molar absorptivity of 5.32×10⁴1mol^–1 cm^–1. The effect of interfering ions has been studied and the method was applied to the determination of cobalt in alloys, with good results.     

Sulfur dioxide mediated one-pot, three- and four-component syntheses of polyfunctional sulfonamides and sulfonic esters: study of the stereoselectivity of the ene reaction of sulfur dioxide

The ene reaction of sulfur dioxide with enoxysilanes or with allylsilanes generates silyl sulfinates that can be brominated (Br(2) or NBS) or chlorinated (NCS or Cl(2)) to produce the corresponding sulfonyl halides. They react with primary and secondary amines or alcohols to give the corresponding sulfonamides and sulfonic esters, respectively. The hetero-Diels-Alder addition of sulfur dioxide to 1-oxy- or 1,3-dioxy-1,3-dienes generates zwitterions that add to enoxysilanes or allylsilanes giving silyl sulfinates that can be converted in situ into polyfunctional sulfonamides or sulfonic esters. This realizes quick access to libraries of complicated sulfonamides and sulfonic esters applying one-pot, three- and four-component methods.     

DAPPA grafted polymer: an efficient solid phase extractant for U(VI), Th(IV) and La(III) from acidic waste streams and environmental samples

A new class of polymeric resin has been synthesized by grafting Merrifield chloromethylated resin with (dimethyl amino-phosphono-methyl)-phosphonic acid (MCM-DAPPA), for the preconcentration of U(VI), Th(IV) and La(III) from both acidic wastes and environmental samples. The various chemical modification steps involved during grafting process are characterized by FT-IR spectroscopy, ³¹P and ¹³C-CPMAS (cross-polarized magic angle spin) NMR spectroscopy and CHNS/O elemental analysis. The water regain capacity data for the grafted polymer are obtained from thermo-gravimetric (TG) analysis. The influence of various physico-chemical parameters during the quantitative extraction of metal ions by the resin phase are studied and optimized by both static and dynamic methods. The significant feature of this grafted polymer is its ability to extract both actinides and lanthanides from high-level acidities as well as from near neutral conditions. The resin shows very high sorption capacity values of 2.02, 0.89 and 0.54 mmol g⁻¹ for U(VI), 1.98, 0.63 and 0.42 mmol g⁻¹ for Th(IV) and 1.22, 0.39 and 0.39 mmol g⁻¹ for La(III) under optimum pH, HNO₃ and HCl concentration, respectively. The grafted polymer shows faster phase exchange kinetics (<5 min is sufficient for 50% extraction) and greater preconcentration ability, with reusability exceeding 20 cycles. During desorption process, all the analyte ions are quantitatively eluted from the resin phase with >99.5% recovery using 1 M (NH₄)₂CO₃, as eluent. The developed grafted resin has been successfully applied in extracting Th(IV) from high matrix monazite sand, U(VI) from sea water and also U(VI) and Th(IV) from simulated nuclear spent fuel mixtures. The analytical data obtained from triplicate measurements are within 3.9% R.S.D. reflecting the reproducibility and reliability of the developed method.     

Glycosylidene Carbenes. Part 15. Synthesis of disaccharides from allopyranose-derived vicinal 1,2-diols. Evidence for the protonation by a H-bonded hydroxy group in the σ-plane of the intermediate carbene,followed by attack on the oxycarbenium ion in the π-plane

The α-D -allo-diol 9 possesses an intramolecular H-bond (HO? C(3) to O? C(1)) in solution and in the solid state (Fig. 2). In solution, it exists as a mixture of the tautomers 9a and 9b (Fig. 3), which possess a bifurcated H-bond, connecting HO? C(2) with both O? C(1) and O? C(3). In addition, 9a possesses the same intramolecular H-bond as in the solid state, while 9b is characterized by an intramolecular H-bond between HO? C(3) and O? C(4). In solution, the β-D -anomer 12 is also a mixture of tautomers, 12a and presumably a dimer. The H-bonding in 9 and 12 is evidenced by their IR and ¹H-NMR spectra and by a comparison with those of 3–8, 10 , and 11 . The expected regioselectivity of glycosidation of 9 and 12 by the diazirine 1 or the trichloroacetimidate 2 is discussed on the basis of the relative degree of acidity/nucleophilicity of individual OH groups, as governed by H-bonding. Additional factors determining the regioselectivity of glycosidation by 1 are the direction of carbene approach/proton transfer by H-bonded OH groups, and the stereoelectronic control of both the proton transfer to the alkoxy-alkyl carbene (in the σ-plane) and the combination of the thereby formed ions (π-plane of the oxycarbenium ion). Glycosidation of 9 by the diazirine 1 or the trichloroacetimidate 2 proceeded in good yields (75–94%) and with high regioselectivity. Glycosidation of 9 and 12 by 1 or 2 gave mixtures of the disaccharides 14–17 and 18–21 , respectively (Scheme 2). As expected, glycosidation of 12 by 1 or by 2 gave a nearly 1:1 mixture of regioisomers and a slight preference for the β-D -anomers (Table 4). Glycosidation of the α-D -anomer 9 gave mostly the 1,3-linked disaccharides 16 and 17 (α-D β-D ) along with the 1,2-linked disaccharides 14 and 15 (α-D < β-D , 1,2-/1,3-linked glycosides ca. 1:4), except in THF and at low temperature, where the β-D -configurated 1,2-linked disaccharide 15 is predominantly formed. Similarly, glycosidation of 9 with 2 yielded mainly the 1,3-linked disaccharides (1,2-/1,3-linked products ca. 1:3 and α-D /β-D ca. 1:4). Yields and selectivity depend upon the solvent and the temperature. The regioselectivity and the unexpected stereoselectivity of the glycosidation of 9 by 1 evidences the combined effect of the above mentioned factors, which also explain the lack of regio-complementarity in the glycosidation of 9 by 1 and by 2 (Scheme 3). THF solvates the intermediate oxycarbenium ion, as evidenced by the strong influence of this solvent on the regio- and stereoselectivity, particularly at low temperatures, where kinetic control leads to a stereoelectronically preferred axial attack of THF on the oxycarbenium ion.