Investigation of entrance effects on particle electrophoretic behavior near a nanopore for resistive pulse sensing

Resistive pulse sensing using solid-state nanopores provides a unique platform for detecting the structure and concentration of molecules of different types of analytes in an electrolyte solution. The capture of an entity into a nanopore is subject not only to the electrostatic force but also the effect of electroosmotic flow originating from the charged nanopore surface. In this study, we theoretically analyze spherical particle electrophoretic behavior near the entrance of a charged nanopore. By investigating the effects of pore size, particle–pore distance, and salt concentration on particle velocity, we summarize dominant mechanisms governing particle behavior for a range of conditions. In the literature, the Helmholtz–Smoluchowski equation is often adopted to evaluate particle translocation by considering the zeta potential difference between the particle and nanopore surfaces. We point out that, due to the difference of the electric field inside and outside the nanopore and the influence from the existence of the particle itself, the zeta potential of the particle, however, needs to be at least 30% higher than that of the nanopore to allow the particle to enter into the nanopore when its velocity is close to zero. Accordingly, we summarize the effective salt concentrations that enable successful particle capture and detection for different pore sizes, offering direct guidance for nanopore applications.     

NMR Study of the Stoichiometry, Stability, and Ligand Interchange of Silver Ion-Hexathia-18-crown-6 Complex in Binary Dimethyl Sulfoxide Solvent Mixtures at 300 K

Proton NMR was used to study the complexation reaction between silver ion and hexathia-18-crown-6 in a number of binary mixed solvents of dimethyl sulfoxide with acetonitrile and methanol. Formation constants for the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift-mole ratio data. The influence of solvent composition on the stability of the resulting complex is discussed. The exchange kinetics of Ag⁺-hexathia-18-crown-6 in 70-30 wt.% dimethyl sulfoxide-acetonitrile and 75-25 wt.% dimethyl sulfoxide-methanol were studied by proton NMR line-shape analysis. In both solvent mixtures, the exchange of thiacrown ether between the free and complexed sites was found to proceed via a dissociative pathway. The exchange rates and the activation parameters E _a, H , S, and G for the ligand exchange were determined and the influence of solvent properties on these parameters discussed.     

Molecularly imprinted nanoparticles-based electrochemical sensor for determination of ultratrace parathion in real samples

Molecularly imprinted polymer nanoparticles (nano-MIP), containing parathion selective sites, were synthesized by using suspension polymerization in silicon oil and then used for carbon paste electrode preparation. The obtained electrode was applied as an electrochemical sensor for parathion determination in different fruit and vegetable samples. Different factors including electrode composition, conditions of parathion extraction in the electrode and electrochemical measurement conditions were evaluated and then optimized by using various techniques of screening and response surface experimental designs. Electrode response to parathion (Res₁) and its selectivity for parathion (Res₂) were the desired responses. These responses were optimized simultaneously. After optimization, a sensor with high selectivity and picomolar detection limit were obtained. It was shown that the sensor response to parathion concentration was linear in the concentration range of 0.05 to 150?nmol?L^?1. The detection limit of designed sensor was calculated equal to 0.02?nmol?L^?1. The developed determination method was properly used for ultra-trace level assay of parathion in different fruit and cabbage samples.     

A Simple Synthesis of Stable 1,4-Diionic Pyridinium Betaines

 Protonation of the reactive intermediate produced in the reaction between pyridine and dialkyl acetylenedicarboxylates by strong CH-acids such as N,N′-dimethylbarbituric acid, Meldrum’s acid, or indane-1,3-dione leads to a vinylpyridinium cation which undergoes an addition reaction with the enolate anion of the CH-acid to produce stable 1,4-diionic pyridinium betaines in good yields.     

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

A new method for the synthesis of functionalized maleimides

An effective route to novel maleimides is described, which involves the reaction of an enamine derived from the addition of a secondary amine to a dialkyl acetylenedicarboxylate with an arylsulfonyl isocyanate. These maleimides in solution indicate dynamic NMR because of restricted rotation around the carbon-nitrogen bond, resulting from conjugation of the side-chain nitrogen with the adjacent α,β-unsaturated ester group.     

Preparation and characterization of Cu (II) Schiff base complex functionalized boehmite nanoparticles and its application as an effective catalyst for oxidation of sulfides and thiols

The synthesis, characterization, and evaluation of a Schiff base Cu (II) complex functionalized boehmite nanoparticles (Cu-complex-boehmite) as a new catalyst for oxidation of sulfides and thiols in the presence of hydrogen peroxide with complete selectivity and high conversion under solvent-free and mild reaction conditions were reported. Characterization of the catalyst was performed with various physicochemical methods. This effective catalyst was evaluated in terms of activity and reusability. It indicated high catalytic activity, good recoverability and reusability, and supplied the corresponding products in high yields and short reaction times. In addition, it shows notable advantages such as simplicity of operation, heterogeneous nature, easy work up, and it could be used at least eight times with no significant loss of its activity.     

A sensitive and efficient method for trace analysis of some phenolic compounds using simultaneous derivatization and air‐assisted liquid–liquid microextraction from human urine and plasma samples followed by gas chromatography–nitrogen phosphorous detection

In present study, a simultaneous derivatization and air‐assisted liquid–liquid microextraction method combined with gas chromatography–nitrogen phosphorous detection has been developed for the determination of some phenolic compounds in biological samples. The analytes are derivatized and extracted simultaneously by a fast reaction with 1‐flouro‐2,4‐dinitrobenzene under mild conditions. Under optimal conditions low limits of detection in the range of 0.05–0.34 ng mL^?1 are achievable. The obtained extraction recoveries are between 84 and 97% and the relative standard deviations are less than 7.2% for intraday (n = 6) and interday (n = 4) precisions. The proposed method was demonstrated to be a simple and efficient method for the analysis of phenols in biological samples. Copyright © 2015 John Wiley & Sons, Ltd.     

Rapid and Facile Access to Indeno[1,2‐d]imidazoles via a Tandem Addition?Cyclization Reaction

A novel and tandem synthesis of highly functionalized tetrahydroindeno[1,2‐d]imidazole is described. A one‐pot reaction between a primary amine, an aryl isothiocyanate, and ninhydrin leads to highly substituted indeno[1,2‐d]imidazoles under solvent‐free conditions in excellent yields (Scheme). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Study binding of Al-curcumin complex to ds-DNA, monitoring by multispectroscopic and voltammetric techniques

In this work a complex of Al3+ with curcumin ([Al(curcumin) (EtOH)2](NO3)2) was synthesized and characterized by UV-vis, FT-IR, elemental analysis and spectrophotometric titration techniques. The mole ratio plot revealed a 1:1 complex between Al3+ and curcumin in solution. For binding studies of this complex to calf thymus-DNA various methods such as: UV-vis, fluorescence, circular dichroism (CD), FT-IR spectroscopy and cyclic voltammetry were used. The intrinsic binding constant of ACC with DNA at 25°C was calculated by UV-vis and cyclic voltammetry as 2.1×10(4) and 2.6×10(4), respectively. The thermodynamic studies showed that the reaction is enthalpy and entropy favored. The CD results showed that only the Δ-ACC interacts with DNA and the Δ-ACC form has not any tendency to interact with DNA, also the pure curcumin has not any stereoselective interaction with CT-DNA. Fluorimetric studies showed that fluorescence enhancement was initiated by a static process in the ground state. The cyclic voltammetry showed that ACC interact with DNA with a binding site size of 2. From the FT-IR we concluded that the Δ-ACC interacts with DNA via partial electrostatic and minor groove binding. In comparison with previous works it was concluded that curcumin significantly reduced the affinity of Al3+ to the DNA.