Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006     

Allyl protecting group mediated intramolecular aglycon delivery (IAD): synthesis of α-glucofuranosides and β-rhamnopyranosides

The use of allyl protecting group mediated intramolecular aglycon delivery (IAD) as a strategy for intramolecular glycosylation has been extended to allow the stereoselective synthesis of α-glucofuranosides and β-rhamnopyranosides, in a totally stereoselective fashion. The efficiency of intramolecular glycosylation is dependent on the protecting group pattern of the glycosyl donor, and on the steric bulk of the glycosyl acceptor.     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Kinetics and mechanism of the acid-catalysed decarboxylation of thecis-α- andcis-β-carbonato(3,6-dimethyl-1,8-diamino-3,6-diazaoctane)-cobalt(III) ions

Summary The acid-catalysed decarboxylation of thecis-- andcis--[CoL(CO₃)]⁺ complexes (L = 3,6-dimethyl-1,8-diamino-3,6-diazaoctane) have been studied over a range of HClO₄ concentrations and the temperatures 25, 35 and 45° at I = 1.0 mol dm^–3 (NaClO₄). The rate expression takes the form k_obs = k₀ + k₁[H⁺] where k_obs is the observed first order rate constant at constant hydrogen ion concentration. The k₀ term makes only a minor contribution to the overall reaction. Both complexes display solvent deuterium isotope effects ofca. 2.6 for the acid-catalysed decarboxylation, consistent with a rapid proton pre-equilibrium mechanism. Activation parameters have been determined and the mechanism of the reaction discussed. The magnitude of the solvent isotope effect is consistent with an A-1 type mechanism involving formation of a 5-coordinate intermediate.     

A Mets motif peptide found in copper transport proteins selectively binds Cu(I) with methionine-only coordination

Mets motifs, which refer to methionine-rich sequences found in the high-affinity copper transporter Ctr1, also appear in other proteins involved in copper trafficking and homeostasis, including other Ctrs as well as Pco and Cop proteins isolated from copper-resistant bacteria. To understand the coordination chemistry utilized by these proteins, we studied the copper binding properties of a peptide labeled Mets7-PcoC with the sequence Met-Thr-Gly-Met-Lys-Gly-Met-Ser. By comparing this sequence to a series of mutants containing noncoordinating norleucine in place of methionine, we confirm that all three methionine residues are involved in a thioether-only binding site that is selective for Cu(I). Two independent methods, one based on mass spectrometry and one based on rate differences for the copper-catalyzed oxidation of ascorbic acid, provide an effective K(D) of approximately 2.5 microM at pH 4.5 for the 1:1 complex of Mets7-PcoC with Cu(I). These results establish that a relatively simple peptide containing an MX(2)MX(2)M motif is sufficient to bind Cu(I) with an affinity that corresponds well with its proposed biological function of extracellular copper acquisition.     

The effect of hydrolysis time on amino acid analysis

Determining the amino acid content of a protein involves the hydrolysis of that protein, usually in acid, until the protein-bound amino acids are released and made available for detection. Both the variability in the ease of peptide bond cleavage and differences in the acid stability of certain amino acids can significantly affect determination of a protein's amino acid content. By using multiple hydrolysis intervals, a greater degree of accuracy can be obtained in amino acid analysis. Correction factors derived by linear extrapolation of serial hydrolysis data are currently used. Compartmental modeling of the simultaneous hydrolysis (yield) and degradation (decay) of amino acids by nonlinear multiple regression of serial hydrolysis data has also been validated and applied to determine the amino acid composition of various biological samples, including egg-white lysozyme, human milk protein, and hair. Implicit in the routine application of serial hydrolysis in amino acid analysis, however, is an understanding that correction factors, derived either linearly or through the more accurate nonlinear multiple regression approach, need to be determined for individual proteins rather than be applied uniformly across all protein types.     

Characterization of N-terminal processing of group VIA phospholipase A<Subscript>2</Subscript> and of potential cleavage sites of amyloid precursor protein constructs by automated identification of signature peptides in LC/MS/MS analyses of proteolytic digests

Dysregulation of proteolytic processing of the amyloid precursor protein (APP) contributes to the pathogenesis of Alzheimer's Disease, and the Group VIA phospholipase A(2) (iPLA(2)beta) is the dominant PLA(2) enzyme in the central nervous system and is subject to regulatory proteolytic processing. We have identified novel N-terminal variants of iPLA(2)beta and previously unrecognized proteolysis sites in APP constructs with a C-terminal 6-myc tag by automated identification of signature peptides in LC/MS/MS analyses of proteolytic digests. We have developed a Signature-Discovery (SD) program to characterize protein isoforms by identifying signature peptides that arise from proteolytic processing in vivo. This program analyzes MS/MS data from LC analyses of proteolytic digests of protein mixtures that can include incompletely resolved components in biological samples. This reduces requirements for purification and thereby minimizes artifactual modifications during sample processing. A new algorithm to generate the theoretical signature peptide set and to calculate similarity scores between predicted and observed mass spectra has been tested and optimized with model proteins. The program has been applied to the identification of variants of proteins of biological interest, including APP cleavage products and iPLA(2)beta, and such applications demonstrate the utility of this approach.     

Kinetic and mechanistic studies of the reaction of a range of bases and metal-hydroxo complexes with the phosphonate ester 2,4-dinitrophenyl ethyl methylphosphonate in aqueous solution

The base hydrolysis and spontaneous water hydrolysis of the phosphonate ester 2,4-dinitrophenyl ethyl methylphosphonate (DNPEMP) has been studied in detail and the activation parameters for these processes determined. The catalytic effect of a series of 19 oxygen and nitrogen bases and metal hydroxo complexes has been studied. The Brønsted plot of pK versus logkN has a slope (β) of 0.47, which is fairly typical for phosphate and phosphonate esters. alpha-Effect nucleophiles such as 2-iodosobenzoate, hypochlorite and the hydroperoxide ion (HO-2) exhibit enhanced reactivity, as does fluoride ion and the bifunctional metal complex [Cu(tmen) (OH2)(OH)]+ (tmen = N,N,N',N',-tetramethylethylenediamine). Reactions involving these species appear to take place by a nucleophilic pathway, while the other oxygen and nitrogen bases act as general base catalysts. The solvent deuterium isotope effect for Et3N catalysis, kH2O/kD2O=1.3, is consistent with general base catalysis. The mechanisms of these reactions are discussed in detail.