Self‐assembly of H‐bonded side‐chain and cross‐linking copolymers containing diblock‐copolymeric donors and single/double H‐bonded light‐emitting acceptors

A series of diblock‐copolymers were synthesized through anionic polymerization of styrene and tert‐butyl methacrylate (tBuA) with different monomer ratios, and analogous block‐copolymeric derivatives (PS‐b‐PAA)s with monofunctional carboxylic acid groups were obtained by further hydrolyzation as hydrogen‐bonded (H‐bonded) proton donors. Via H‐bonded interaction, these diblock‐coplymeric donors (PS‐b‐PAA)s were incorporated with luminescent mono‐pyridyl/bis‐pyridyl acceptors to form single/double H‐bonded supramolecules, that is, H‐bonded side‐chain/cross‐linking copolymers, respectively. The supramolecular architectures formed by donor polymers and light‐emitting acceptors were influenced by the ratio of acid blocks in the diblock copolymeric donors and the type of single/double H‐bonded light‐emitting acceptors. Their thermal and luminescent properties can be adjusted by H‐bonds, and more than 100 nm of red‐shifted photoluminescence (PL) emissions were observed, which depend on the degrees of the H‐bonding interactions. Self‐assembled phenomena of amphiphilic dibolck copolymers and their H‐bonded complexes were confirmed by TEM micrographs, and supramolecular microphase separation of spherical micelle‐like morphology was demonstrated to affect the photophysical properties. Polymer light‐emitting diode (PLED) devices containing H‐bonded complexes showed electroluminescence (EL) emissions of 503–560 nm under turn‐on voltages of 7.5–9.0 V, maximum power efficiencies of 0.23–0.37 cd/A (at 100 mA/cm²), and maximum luminances of 318–519 cd/m² (around 25 V). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4685–4702, 2009     

The effect of F substitution on the magnetic properties of Nd−Fe−B based compounds

Various efforts are currently undertaken to raise the relatively low Curie temperature of the otherwise promising Nd?Fe?B type permanent magnet material. The substitution of Fe by several elements was found to increaseT _c, which, on the other hand, can be accompanied by a reduction of the magnetocrystalline anistropy. In the present paper a systematic Mössbauer study was carried out, using Co, Ni, Al, Si and Ga as substituents. The specific influence of each element upon the magnetic properties is attributed to its preference for entering a certain Fe lattice site. Simple atomic size considerations are proved to be insufficient for explaining the preferred occupation observed experimentally. Obviously the local electronic structure has to be studied more carefully. Finally, the interplay between magnetism and metallurgy (particularly the formation of precipitations), is found to be of some importance.     

凹凸棒石/硅橡胶复合材料的热氧化降解和老化性能研究

本文采用高压均质结合对辊挤压工艺对天然凹凸棒石进行棒晶解离得到了纯度较高和比表面积较大(133.7 m²/g)的纳米解离凹凸棒石. 进一步通过机械共混法分别将天然凹凸棒石和纳米解离凹凸棒石与硅橡胶生胶复合制备了天然凹凸棒石-硅橡胶和纳米解离凹凸棒石-硅橡胶材料,研究了天然凹凸棒石和纳米解离凹凸棒石对凹凸棒石/硅橡胶复合材料热氧化降解和老化性能的影响. 结果表明,天然凹凸棒石-硅橡胶和纳米解离凹凸棒石-硅橡胶在300 oC热氧老化处理0.5 h后,相比于纯硅橡胶,初始5%失重温度从385 oC提高至396∽399 oC. 系列表征结果表明,天然凹凸棒石和纳米解离凹凸棒石增强了纳米粒子与硅橡胶之间的相互作用从而抑制了纳米颗粒聚集,并且可显著提高硅橡胶侧链Si-CH₃的保存率,从而提高了该复合材料的热氧化降解和老化性能. 此外,纳米解离凹凸棒石可大大抑制纳米粒子的长大;因此老化后,纳米解离凹凸棒石-硅橡胶表现出了比硅橡胶(10.6%、7.4%和5.0%)更高的拉伸强度、断裂伸长率和撕裂强度保留率(40.6%、34.9% 和30.1%).     

On vortex shedding behind a circular disk

Abtract  Experiments were performed for individual realizations of the vortex shedding process behind a circular disk at Reynolds numbers of 10³–10⁵, at which periodic vortex shedding prevails in the wake. The phase differences regarding the individual vortex shedding structures detected at multiple circumferential locations in the wake were obtained by analyzing the hot-wire signals with a conditional-sampling scheme. The phase differences of vortex shedding detected at circumferential positions 90° apart show a wide scatter, but the anti-phase character is largely preserved in the individual vortex shedding process as detected at circumferential locations 180° apart. The randomness of phase differences involved in the vortex shedding process is noted to be essential in order to satisfy the axisymmetric property of the global flow. Received: 4 April 19969/Accepted: 29 January 1997     

β‐Diketiminate‐Stabilized Magnesium(I) Dimers and Magnesium(II) Hydride Complexes: Synthesis,Characterization, Adduct Formation,and Reactivity Studies

The preparation and characterization of a series of magnesium(II) iodide complexes incorporating β‐diketiminate ligands of varying steric bulk and denticity, namely, [(ArNCMe)₂CH]^? (Ar=phenyl, (^PhNacnac), mesityl (^MesNacnac), or 2,6‐diisopropylphenyl (Dipp, ^DippNacnac)), [(DippNCtBu)₂CH]^? (^tBuNacnac), and [(DippNCMe)(Me₂NCH₂CH₂NCMe)CH]^? (^DmedaNacnac) are reported. The complexes [(^PhNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(OEt₂)], [(^DmedaNacnac)MgI(OEt₂)], [(^MesNacnac)MgI(thf)], [(^DippNacnac)MgI(thf)], [(^tBuNacnac)MgI], and [(^tBuNacnac)MgI(DMAP)] (DMAP=4‐dimethylaminopyridine) were shown to be monomeric by X‐ray crystallography. In addition, the related β‐diketiminato beryllium and calcium iodide complexes, [(^MesNacnac)BeI] and [{(^DippNacnac)CaI(OEt₂)}₂] were prepared and crystallographically characterized. The reductions of all metal(II) iodide complexes by using various reagents were attempted. In two cases these reactions led to the magnesium(I) dimers, [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)]. The reduction of a 1:1 mixture of [(^DippNacnac)MgI(OEt₂)] and [(^MesNacnac)MgI(OEt₂)] with potassium gave a low yield of the crystallographically characterized complex [(^DippNacnac)Mg(μ‐H)(μ‐I)Mg(^MesNacnac)]. All attempts to form beryllium(I) or calcium(I) dimers by reductions of [(^MesNacnac)BeI], [{(^DippNacnac)CaI(OEt₂)}₂], or [{(^tBuNacnac)CaI(thf)}₂] have so far been unsuccessful. The further reactivity of the magnesium(I) complexes [(^MesNacnac)MgMg(^MesNacnac)] and [(^tBuNacnac)MgMg(^tBuNacnac)] towards a variety of Lewis bases and unsaturated organic substrates was explored. These studies led to the complexes [(^MesNacnac)Mg(L)Mg(L)(^MesNacnac)] (L=THF or DMAP), [(^MesNacnac)Mg(μ‐AdN₆Ad)Mg(^MesNacnac)] (Ad=1‐adamantyl), [(^tBuNacnac)Mg(μ‐AdN₆Ad)Mg(^tBuNacnac)], and [(^MesNacnac)Mg(μ‐tBu₂N₂C₂O₂)Mg(^MesNacnac)] and revealed that, in general, the reactivity of the magnesium(I) dimers is inversely proportional to their steric bulk. The preparation and characterization of [(^tBuNacnac)Mg(μ‐H)₂Mg(^tBuNacnac)] has shown the compound to have different structural and physical properties to [(^tBuNacnac)MgMg(^tBuNacnac)]. Treatment of the former with DMAP has given [(^tBuNacnac)Mg(H)(DMAP)], the X‐ray crystal structure of which disclosed it to be the first structurally authenticated terminal magnesium hydride complex. Although attempts to prepare [(^MesNacnac)Mg(μ‐H)₂Mg(^MesNacnac)] were not successful, a neutron diffraction study of the corresponding magnesium(I) complex, [(^MesNacnac)MgMg(^MesNacnac)] confirmed that the compound is devoid of hydride ligands.     

Textile‐based Electrochemical Sensing: Effect of Fabric Substrate and Detection of Nitroaromatic Explosives

This study examines the influence of textile substrates upon the behavior of wearable screen‐printed electrodes and demonstrates the attractive sensing properties of these sensors towards the detection of nitroaromatic explosives. Compared to electrodes printed on common cotton or polyester substrates, GORE‐TEX‐based electrochemical sensors display reproducible background cyclic voltammograms, reflecting the excellent water‐repellant properties of the GORE‐TEX fabric. The wetting properties of different printed textile electrodes are elucidated using contact angle measurements. The influence of laundry washing and mechanical stress is explored. The GORE‐TEX‐based printed electrodes exhibit favorable detection of 2,4‐dinitrotoluene (DNT) and 2,4,6‐trinitrotoluene (TNT) explosives, including rapid detection of DNT vapor.     

Simulation of loss mechanisms in organic solar cells: A description of the mesoscopic Monte Carlo technique and an evaluation of the first reaction method

In this letter we evaluate the accuracy of the first reaction method (FRM) as commonly used to reduce the computational complexity of mesoscale Monte Carlo simulations of geminate recombination and the performance of organic photovoltaic devices. A wide range of carrier mobilities, degrees of energetic disorder, and applied electric field are considered. For the ranges of energetic disorder relevant for most polyfluorene, polythiophene, and alkoxy poly(phenylene vinylene) materials used in organic photovoltaics, the geminate separation efficiency predicted by the FRM agrees with the exact model to better than 2%. We additionally comment on the effects of equilibration on low-field geminate separation efficiency, and in doing so emphasize the importance of the energy at which geminate carriers are created upon their subsequent behavior.     

Ketene functionalized polyethylene: control of cross-link density and material properties

The functionalization and cross-linking of polyethylene is synthetically challenging, commonly relying on highly optimized radical based postpolymerization strategies. To address these difficulties, a norbornene monomer containing Meldrum's acid is shown to be effectively copolymerized with polyethylene using a nickel α-iminocarbaxamidato complex, providing high-melting, semicrystalline polymers with a tunable incorporation of the functional comonomer. Upon heating the copolymer to common polyethylene processing temperatures, the thermolysis of Meldrum's acid to ketene provides the desired reactive group. This simple and versatile methodology does not require small molecule radical sources or catalysts, and the dimerization of the in situ generated ketenes is shown to provide tunable cross-linking densities in polyethylene. Subsequent rheological and tensile experiments illustrate the ability to tune cross-linked polyethylene properties by comonomer incorporation and elucidate valuable structure/property relationships in these materials. This study illustrates the power of well-defined and synthetically accessible functional groups in polyolefin synthesis and functionalization.     

Protein identification from two-dimensional gel electrophoresis by connecting ZipTip with a home-assembled nanoflow system

Mass spectrometry (MS) is a powerful technique for protein identification in proteomic research. Two-dimensional gel electrophoresis (2-DE) combined with MS is a significant method for protein separation and identification. For protein identification, peptide sequencing is usually carried out by an effective but expensive nano-flow liquid chromatographic system combined to tandem mass spectrometry (MS/MS). However, protein identification based on such method is time-consuming, and contamination may occur as a result of column overloading. In this study, we establish an alternative nanoscale system for protein identification using MS/MS. The system consists of several devices that can be purchased from commercial sources and can be connected to an electrospray ionization quadrupole-time of flight (ESI-Q-TOF) MS in order to analyze proteins from 2D gels. This inexpensive strategy provides an attractive alternative method for rapid identification of proteins using a nanospray source. In addition, the device is disposable so that contamination is avoided. It is shown that peptide sequencing based on this device using ESI-Q-TOF MS is accomplished within 10 min.