Diastereotopic effect in some N-substituted-3-methyl-4,1-benzoxazepine-2,5-diones

1H NMR assignment of seven differently N-substituted-3-methyl-4,1-benzoxazepine-2,5-diones (I) revealed that with the exception of allyl, N-methylene protons of the substituents exhibit diastereotopy due to presence of a chiral centre in the heterocyclic ring at C-3. The significant finding is that the methylenes at C-2' in the substituents n-propyl and n-butyl (Id, Ie) also show diastereotopy. However, the one closer to the chiral centre (at C-1') exhibits greater non-equivalence of its protons. The diastereotopic methylene groups reported in this study correspond to the simplest system AB on one hand and as complex as ABMM'X2 or ABMM'X3 on the other. Calculated spectra obtained from assigned set of data for most of the coupled protons were in good agreement with the observed ones.     

Density functional theory study on structural isomers and bonding of model complexes M(CO)5(BH3 · PH3) (M = Cr, Mo, W) and W(CO)5(BH3 · AH3) (A = N, P, As, Sb)

The influence of group 15 various substituents and effect of metal centers on metal-borane interactions and structural isomers of transition metal-borane complexes W(CO)₅(BH₃ · AH₃) and M(CO)₅(BH₃ · PH₃) (A = N, P, As, and Sb; M = Cr, Mo, and W), were investigated by pure density functional theory at BP86 level. The following results were observed: (a) the ground state is monodentate, η¹, with C₁ point group; (b) in all complexes, the η¹ isomer with C_S symmetry on potential energy surface is the transition state for oscillating borane; (c) the η² isomer is the transition state for the hydrogens interchange mechanism; (d) in W(CO)₅(BH₃ · AH₃), the degree of pyramidalization at boron, interaction energy as well as charge transfer between metal and boron moieties, energy barrier for interchanging hydrogens, and diffuseness of A increase along the series A = Sb < As < P < N; (e) in M(CO)₅(BH₃ · PH₃), interaction energy is ordered as M = W > Cr > Mo, while energy barrier for interchanging hydrogens decreases in the order of M = Cr > W > Mo.     

HPLC Determination of Letrozole in Plasma Using Fluorescence Detection: Application to Pharmacokinetic Studies

A simple, rapid and sensitive HPLC method has been developed and validated for the analysis of letrozole in human plasma. The separation was achieved on a monolithic silica column using acetonitrile–phosphate buffer. A fluorescence detector was used for the quantitation with excitation and emission wavelengths at 230 and 295 nm. The assay enables the measurement of letrozole for therapeutic drug monitoring with a minimum quantification limit (LOQ) of 0.5 ng mL^?1. The method involves a simple, one-step extraction procedure with complete recovery. Calibration was linear over the concentration range 0.5–80 ng mL^?1. The coefficients of variation for inter-day and intra-day assay were found to be less than 8%.     

Kinetics and mechanism of reaction between mercuric bromide and silver iodide in solid state

Kinetics and mechanism of the reaction between mercuric bromide and silver iodide were studied in the solid state. It has been established that HgBr₂ reacts via the gaseous state and that the reaction proceeds through counter diffusion of Ag⁺ and Hg²⁺. Thermal and conductivity measurements indicate that the reaction is multistep. X-ray and chemical analyses show that HgBr₂ and AgI mixed in different molar ratios give rise to different products. The data for the lateral diffusion fitted the equation X_iⁿ = kt, where X_i is the thickness of the product layer at time t, and n and k are constants. Evidence for the formation of solid solutions between reactant and product phases is reported.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Density functional theory study of the Fourier transform infrared and Raman spectra of Cu(II) bis-acetylacetone

Fourier transform infrared and Fourier transform Raman spectra of Cu(II) bis-acetylacetone have been obtained. The geometry, frequency and intensity of the vibrational bands of this compound and its 1,5-(13)C(2), 3-(13)C, 1,3,5-(13)C(3), 2,4-(13)C(2), (18)O(2) and 2,4-(13)C(2)-(18)O(2) derivatives were obtained by the density functional theory (DFT) with the B3LYP functional and using the 6-31G(*) and 3-21G(*) basis sets. The calculated frequencies are compared with the solid infrared and Raman spectra. All the measured infrared and Raman bands were interpreted in terms of the calculated vibrational modes. The percentage of deviation of the bond lengths and bond angles gives a good picture of the normal modes, and serves as a basis for the assignment of the wavenumbers. Most computed bands are predicted to be at higher wavenumbers than the experimental bands. The calculated geometrical parameters show slight differences compared with the experimental results. These differences can be explained by the different physical state of Cu(II) bis-acetylacetone. The DFT-B3LYP calculations assumed a free molecule in the gas phase. Analysis of the vibrational spectra indicates a strong coupling between the chelated ring modes.     

Thermodynamic properties of the NdBr3–MBr binary systems (M = Na,K)

Thixoforming involves heating different types of alloys to the semisolid state at high heating rates and forming in die-casting machines or conventional presses. At temperatures higher than the solidus and lower than the liquidus, the mush metal behaves like a high-viscosity thixotropic material. Therefore, determining the thermodynamic behavior of the solid-to-liquid transition is paramount to control thixoforming processes. This article describes a simple, novel experimental setup based on differential thermal analysis (DTA) for analyzing the phase transitions in an alloy heated using high heating rates typical of industrial applications. A365 alloy was chosen to demonstrate the effectiveness of the method as the phase transformations for this alloy in semisolid materials (SSM) processing are well understood. Samples were heated to 750 °C using constant linear heating rates of 5, 10, 15, 20, 25, 50, 75, 100 and 125 °C min in a Norax 25 kW 8 kHz induction furnace with an Omron E5CK temperature controller. AISI 316 austenitic stainless steel was used as the inert reference. Comparison of the results of DTA using the proposed method and the results of simulation with Thermo-Calc^® indicates that the proposed in situ DTA device and its method is suitable for analyzing phase transitions when high heating rates are used.     

A longitudinal study of evolving networks in response to natural disaster

In this study, we present a longitudinal analysis of the evolution of interorganizational disaster coordination networks (IoDCNs) in response to natural disasters. There are very few systematic empirical studies which try to quantify the optimal functioning of emerging networks dealing with natural disasters. We suggest that social network analysis is a useful method for exploring this complex phenomenon from both theoretical and methodological perspective aiming to develop a quantitative assessment framework which could aid in developing a better understanding of the optimal functioning of these emerging IoDCN during natural disasters. This analysis highlights the importance of utilizing network metrics to investigate disaster response coordination networks. Results of our investigation suggest that in disasters the rate of communication increases and creates the conditions where organizational structures need to move at that same pace to exchange new information. Our analysis also shows that inter-organizational coordination network structures are not fixed and vary in each period during a disaster depending on the needs. This may serve the basis for developing preparedness among agencies with an improved perspective for gaining effectiveness and efficiency in responding to natural disasters.