Structural and Solution Studies of two Mercury(II) Complexes with [1,3‐Bis(2‐ethoxy)benzene]triazene

The reaction of [1,3‐bis(2‐ethoxy)benzene]triazene, [ HL ], with Hg(SCN)₂ and Hg(CH₃COO)₂, resulted in the formation of the complexes [Hg L (SCN)] ( 1 ) and [Hg L ₂] · CH₃OH ( 2 ). They were characterized by means of X‐ray crystallography, CHN analysis, FT‐IR, ¹H NMR, and ¹³C NMR spectroscopy. The structure of compound 1 consists of two independent complexes in which the Hg^II atoms are stacked along the crystallographic a axis to form infinite chains. Each Hg^II atom is chelated by one L ligand and one SCN ligand, whereas in compound 2 , the Hg^II atom is surrounded by two L ligands. In addition, 1D chains formed by metal–π interactions are connected to each other by C–H ··· π stacking interactions in the structure of 1 , which results in a 2D architecture. An interesting feature of compound 2 is the presence of C–H ··· π edge‐to‐face interactions.     

multilayer contactless dielectrophoresis: theoretical considerations

Dielectrophoresis (DEP), the movement of dielectric particles in a nonuniform electric field, is of particular interest due to its ability to manipulate particles based on their unique electrical properties. Contactless DEP (cDEP) is an extension of traditional and insulator-based DEP topologies. The devices consist of a sample channel and fluid electrode channels filled with a highly conductive media. A thin insulating membrane between the sample channel and the fluid electrode channels serves to isolate the sample from direct contact with metal electrodes. Here we investigate, for the first time, the properties of multilayer devices in which the sample and electrode channels occupy distinct layers. Simulations are conducted using commercially available finite element software and a less computationally demanding numerical approximation is presented and validated. We show that devices can be created that achieve a similar level of electrical performance to other cDEP devices presented in the literature while increasing fluid throughput. We conclude, based on these models, that the ultimate limiting factors in device performance resides in breakdown voltage of the barrier material and the ability to generate high-voltage, high-frequency signals. Finally, we demonstrate trapping of MDA-MB-231 breast cancer cells in a prototype device at a flow rate of 1.0 mL/h when 250 V(RMS) at 600 kHz is applied.     

A modified homotopy perturbation method and the axial secular frequencies of a non-linear ion trap

In this paper, a modified version of the homotopy perturbation method, which has been applied to non-linear oscillations by V. Marinca, is used for calculation of axial secular frequencies of a non-linear ion trap with hexapole and octopole superpositions. The axial equation of ion motion in a rapidly oscillating field of an ion trap can be transformed to a Duffing-like equation. With only octopole superposition the resulted non-linear equation is symmetric; however, in the presence of hexapole and octopole superpositions, it is asymmetric. This modified homotopy perturbation method is used for solving the resulting non-linear equations. As a result, the ion secular frequencies as a function of non-linear field parameters are obtained. The calculated secular frequencies are compared with the results of the homotopy perturbation method and the exact results. With only hexapole superposition, the results of this paper and the homotopy perturbation method are the same and with hexapole and octopole superpositions, the results of this paper are much more closer to the exact results compared with the results of the homotopy perturbation method.     

Potassium ion-mediated non-covalent bonded coordination polymers

Crystal structures and vibrational spectra of three related network-forming coordination complexes have been studied. Two novel thermodynamically stable pseudo-polymorphic solvated rhodium chloro compounds, [cis-RhCl(4)(DMSO-κS)(2)K](n), 1, and [cis-RhCl(4)(DMSO-κS)(2)K·3H(2)O](n), 2, and one metastable compound [trans-RhCl(4)(DMSO-κS)(2)K·0.25H(2)O](n), 3, crystallize at ambient temperature in the orthorhombic space group P2(1)2(1)2(1) for 1, and the monoclinic space groups P2(1)/n and P2(1)/c for 2 and 3, respectively. All three structures contain [RhCl(4)(DMSO-κS)(2)](-) complexes in which the rhodium(III) ions bind to two dimethyl sulfoxide (DMSO) sulfur atoms and four chloride ions in distorted octahedral coordination geometries. The complexes are connected in networks via potassium ions interacting with the Cl(-) and the DMSO oxygen atoms. As the sum of Shannon ionic radii of K(+) and Cl(-) exceeds the K-Cl distances in compounds under study, these compounds can be described as Rh-Cl-K coordination polymers with non-covalent bonding, which is not common in these systems, forming 1- and 2-D networks for 1/2 and 3, respectively. The 2-D network with nano-layered sheets for compound 3 was also confirmed by TEM images. Further evaluation of the bonding in the cis- and trans-[RhCl(4)(DMSO-κS)(2)](-) entities was obtained by recording Raman and FT-IR absorption spectra and assigning the vibrational frequencies with the support of force-field calculations. The force field study of complexes reveals the strong domination of trans-effect (DMSO-κS > Cl) over the effect of non-covalent bonding in coordination polymeric structures. The comparison of calculated RhCl, RhS and SO stretching force constants showed evidence of K(+)-ligand interactions whereas direct experimental evidences of K(+)-Cl(-) interaction were not obtained because of strong overlap of the corresponding spectral region with that where lattice modes and Rh-ligand bendings appear.     

One‐pot Green Synthesis of Pyrrole Derivatives Catalyzed by Nano Sulfated Zirconia as a Solid Acid Catalyst

A new and efficient method for the preparation of N‐substituted pyrroles from one‐pot Paal‐Knorr condensation has been accomplished using nano‐crystalline sulfated zirconia (SZ) as the catalyst in ethanol at moderate temperature. This new protocol has the advantages of easy availability, stability, reusability and eco‐friendliness of the catalyst, high to excellent yields, simple experimental and work‐up procedure. The synthesized compounds were confirmed through spectral characterization using IR, ¹H NMR, ¹³C NMR and mass spectra.     

Incoherent interaction between bright–bright photovoltaic soliton in an unbiased series two-photon photorefractive crystal circuit

We have investigated incoherent interaction between photovoltaic bright–bright soliton pairs in photorefractive crystals under steady-state condition in an unbiased series two-photon photorefractive crystal circuit in one dimension. The numerical scheme according to the Crank-Nicholson and Runge-kutta methods are applied to simulate the propagation of incoherent interaction for different normalized separation distances and different E₀. Results show that in the case of one-dimensional interaction between these photovoltaic solitons, attraction occurs and width of beams decreases with increasing biased field E₀ and two soliton interact in longer distance for smaller E₀. The result can be used for design optical switches that controlled by biased field.     

Optomechanical nanoantenna

We introduce optomechanical nanoantennae, which show dramatic changes in scattering properties by minuscule changes in geometry. These structures are very compact, with a volume 500 times smaller than free-space optical wavelength volume. This deep subwavelength geometry leads to high speed and low switching power. The bandwidth of the device is about 4.4?GHz, with a switching energy of only 35?pJ. Such antenna structures could lead to compact and high-speed all-optical nanoswitches.     

Ionic liquid 1-(3-Trimethoxysilylpropyl)-3-methylimidazolium nitrite as a new reagent for the efficient diazotization of aniline derivatives and in situ synthesis of azo dyes

A new ionic liquid 1-(3-trimethoxysilylpropyl)-3-methylimidazolium nitrite was synthesized. This ionic liquid was used as a convenient nitrosonium source in diazotization of arylamines into their corresponding diazonium salts which were converted into their related azo dyes via the in situ azo-coupling with aniline derivatives or phenolic compounds. The diazotization of anilines in this ionic liquid and subsequent azo-coupling generated the related azo dyes in good to excellent yields at 0?C5 °C in short reaction times via a simple experimental procedure.     

Targeted energy transfer with parallel nonlinear energy sinks. Part I: Design theory and numerical results

In this paper, we study a Targeted Energy Transfer (TET) problem between a p degrees-of-freedom (dof) linear master structure and several coupled parallel slave Nonlinear Energy Sink (NES) systems. In detail, each lth dof l=1,2,…,p contains n _l parallel NES; so the linear structure has (n ₁+n ₂+⋅⋅⋅+n _l +⋅⋅⋅+n _p ) NES. We are interested to study analytically the TET phenomenon during the first mode of the compound system. To this end, complexification, averaging, and multiple scales methods are used.