The vibration-rotation emission spectrum of gaseous HZnCl

Gaseous HZnCl has been synthesized for the first time in a high-temperature tube furnace with a dc discharge in a flowing mixture of pure HCl and Zn vapor. The vibration-rotation emission spectrum of HZnCl was recorded at high resolution using a Fourier transform spectrometer. The H-Zn stretching modes (nu(1)) of the H(64)Zn(35)Cl, H(66)Zn(35)Cl, H(68)Zn(35)Cl, and H(64)Zn(37)Cl species, as well as the 2nu(1)-nu(1) hot band of the most abundant isotopologue H(64)Zn(35)Cl, were observed near 1966 cm(-1). A least-squares fit was performed for each of the four observed isotopologues, and their spectroscopic constants were determined.     

Synthesis and structural characterization of ferrocene-based bis(pyrazol-1-yl)borate ligands: FcB(Me)pz2K, Fc2Bpz2K, and 1,1′-fc[B(Me)pz2]2K2 (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl)

Reaction of the ferrocenyl(dimethylamino)boranes FcB(Me)NMe₂, Fc₂BNMe₂, and 1,1′-fc[B(Me)NMe₂]₂ with 1:1 mixtures of pyrazole and potassium pyrazolide in refluxing THF gave the potassium salts of the ferrocene-based bis(pyrazol-1-yl)borate ligands FcB(Me)pz₂K, Fc₂Bpz₂K, and 1,1′-fc[B(Me)pz₂]₂K₂ in good yield (Fc: ferrocenyl, fc: ferrocenylene, pz: pyrazolyl). In the solid state, FcB(Me)pz₂K and Fc₂Bpz₂K form centrosymmetric dimers with short K?Cp contacts suggesting an η⁵ coordination mode of the potassium ion. The crystal lattice of the ditopic ligand 1,1′-fc[B(Me)pz₂]₂K₂ consists of coordination polymer strands featuring essentially the same structural motif that has been observed for the monotopic derivatives. All three scorpionate ligands are thus promising building blocks for the preparation of ferrocene-containing multiple-decker sandwich complexes.     

Tetrafluorobenzyne thermochemistry: experiment and theory

Gas-phase thermodynamic properties of 1,2,3,4-tetrafluorobenzyne (1 H-(2)) were determined by Fourier transform mass spectrometry and ab initio and density functional theory methods. 1,2,3,4-Tetrafluorobenzyne radical anion was generated by abstraction of a proton and a hydrogen atom upon reaction of 1,2,3,4-tetrafluorobenzene (1) with O(-.). The resulting structure was confirmed by converting it to a species which could be independently prepared. Bracketing results provided the proton affinity of 1,2,3,4-tetrafluorobenzyne radical anion and the electron affinities of 1,2,3,4-tetrafluorobenzyne and 1,2,3,4-tetrafluorophenyl radical. These measured values were combined in a thermodynamic cycle to provide the heat of hydrogenation of 1 H(2) (DeltaH degree (hyd) = 367 +/- 18 kJ mol(-1)) and the first and second CH bond dissociation energies of 1 (481 +/- 11 and 321 +/- 13 kJ mol(-1)). The same approach failed for the meta and para isomers, but their energetics were examined using B3LYP and CCSD(T) computations.     

Structure–retardation factor relationship of natural amino acids in two different mobile phases of RP-TLC

Abstract

Separation of amino acids (AAs) and their simple and inexpensive determination/identification is an interesting topic in biological and protein science, different food industries, and drug factories. Also, the presentation of the chromatographic behavior of compounds in a predictive model can be effective to estimate the structural/chemical properties of analyte and mobile phases. In this work for the first time, retardation factor (R_F) of 42 AAs in reversed-phase thin layer chromatography (RP-TLC) was modeled. Acetonitrile-sodium azide solution and 1,2 dioxane-sodium azide solution were two mobile phases which have been studied in this work. Results showed that the values of R_F are correlated with the structural properties of AAs and these properties had some similarities and differences in two noted mobile phases. For the TLC data in two mobile phases, five parametric linear models were suggested (R²_train = 0.93 and 0.97; R²_test = 0.93 and 0.99). The models were also evaluated with different statistical approaches. It was shown that increasing the sum of geometrical distances between N and O in AAs causes decreasing their R_F in RP-TLC using both mobile phases. Other structural effects of AAs on their separation in the desired RP-TLC system were also discussed.     

Theoretical study on interaction of different coordination modes of BH4 ligand with transition metal in [TM(BH4)(CO)4] (TM = Cr, Mo)

Density functional calculations were performed on bonding and structural features of [(ηⁿ-BH₄)TM(CO)₄]⁻ (n = 1, 2, 3; TM = Cr, Mo) complexes. Calculations show that the ground state is bidentate which is in good agreement with experimental results. It has been found that the bridge and terminal hydrogen atoms will interchange by two pathways: (i) twist of BH₄ about one of the bridge B-H and (ii) twist of BH₄ about one of the terminal B-H. The molecular orbital calculations and natural bond orbital methodologies for different isomers of these complexes have been evaluated. The final results indicate that case (i) is more preferable relative to another case.     

Green synthesis of banana flavor using different catalysts: a comparative study of different methods

ABSTRACT

Esterification of isoamyl alcohol with acetic acid was studied using different ion-exchange resins, namely Amberlyst 15 dry, Amberlyst 16 wet, Amberlite 120-IR. Esterification was carried out using different esterification methods that are quite new (ohmic, ultrasonic probe, and ultrasonic bath) and the results were compared with microwave-assisted esterification (MAE). The highest isoamyl acetate yield (99%) was obtained by MAE, using a mixture of acetic acid and isoamyl alcohol (mole ratio of 1:2) after 2?h of reaction time. In this process, 2% Amberlyst 15 dry was used. MAE had the least specific energy consumption (0.42?kWh/g isoamyl acetate) and specific CO₂ emission (34?g/g isoamyl acetate). According to the images obtained by scanning electron microscopy, lower amounts of Amberlyst 15 dry beads were destroyed by MAE method compared to other esterification methods. In conclusion, MAE proved to be an economic and environmentally-friendly method for esterification of different flavoring compounds.     

Density functional theory study on structural isomers and bonding of model complexes M(CO)5(BH3 · PH3) (M = Cr, Mo, W) and W(CO)5(BH3 · AH3) (A = N, P, As, Sb)

The influence of group 15 various substituents and effect of metal centers on metal-borane interactions and structural isomers of transition metal-borane complexes W(CO)₅(BH₃ · AH₃) and M(CO)₅(BH₃ · PH₃) (A = N, P, As, and Sb; M = Cr, Mo, and W), were investigated by pure density functional theory at BP86 level. The following results were observed: (a) the ground state is monodentate, η¹, with C₁ point group; (b) in all complexes, the η¹ isomer with C_S symmetry on potential energy surface is the transition state for oscillating borane; (c) the η² isomer is the transition state for the hydrogens interchange mechanism; (d) in W(CO)₅(BH₃ · AH₃), the degree of pyramidalization at boron, interaction energy as well as charge transfer between metal and boron moieties, energy barrier for interchanging hydrogens, and diffuseness of A increase along the series A = Sb < As < P < N; (e) in M(CO)₅(BH₃ · PH₃), interaction energy is ordered as M = W > Cr > Mo, while energy barrier for interchanging hydrogens decreases in the order of M = Cr > W > Mo.     

HPLC Determination of Letrozole in Plasma Using Fluorescence Detection: Application to Pharmacokinetic Studies

A simple, rapid and sensitive HPLC method has been developed and validated for the analysis of letrozole in human plasma. The separation was achieved on a monolithic silica column using acetonitrile–phosphate buffer. A fluorescence detector was used for the quantitation with excitation and emission wavelengths at 230 and 295 nm. The assay enables the measurement of letrozole for therapeutic drug monitoring with a minimum quantification limit (LOQ) of 0.5 ng mL^?1. The method involves a simple, one-step extraction procedure with complete recovery. Calibration was linear over the concentration range 0.5–80 ng mL^?1. The coefficients of variation for inter-day and intra-day assay were found to be less than 8%.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Density functional theory study of the Fourier transform infrared and Raman spectra of Cu(II) bis-acetylacetone

Fourier transform infrared and Fourier transform Raman spectra of Cu(II) bis-acetylacetone have been obtained. The geometry, frequency and intensity of the vibrational bands of this compound and its 1,5-(13)C(2), 3-(13)C, 1,3,5-(13)C(3), 2,4-(13)C(2), (18)O(2) and 2,4-(13)C(2)-(18)O(2) derivatives were obtained by the density functional theory (DFT) with the B3LYP functional and using the 6-31G(*) and 3-21G(*) basis sets. The calculated frequencies are compared with the solid infrared and Raman spectra. All the measured infrared and Raman bands were interpreted in terms of the calculated vibrational modes. The percentage of deviation of the bond lengths and bond angles gives a good picture of the normal modes, and serves as a basis for the assignment of the wavenumbers. Most computed bands are predicted to be at higher wavenumbers than the experimental bands. The calculated geometrical parameters show slight differences compared with the experimental results. These differences can be explained by the different physical state of Cu(II) bis-acetylacetone. The DFT-B3LYP calculations assumed a free molecule in the gas phase. Analysis of the vibrational spectra indicates a strong coupling between the chelated ring modes.