Isomorphism of Hilbert modules over stably finite C-algebras

It is shown that if A is a stably finite C^∗-algebra and E is a countably generated Hilbert A-module, then E gives rise to a compact element of the Cuntz semigroup if and only if E is algebraically finitely generated and projective. It follows that if E and F are equivalent in the sense of Coward, Elliott and Ivanescu (CEI) and E is algebraically finitely generated and projective, then E and F are isomorphic. In contrast to this, we exhibit two CEI-equivalent Hilbert modules over a stably finite C^∗-algebra that are not isomorphic.     

Measurement of the electro-optic coefficient of polymer thin films with better spatial resolution

A method for measuring the electro-optic coefficient of polymer films on the basis of an asymmetry Fabry–Perot cavity is introduced. The sample layer is located between two aluminium layers, which are deposited on glass substrates by thermal evaporation. This layer structure is objected to a laser beam, and a variable voltage is applied to the aluminium films resulting in a modulation of the transmitted laser power. The electro-optic coefficient γ₁₃ of the poled polymer film can be calculated by evaluating the Fabry–Perot equation. The spatial resolution is tested with a polymer film that was poled by a needle corona discharge in air through a metal grating with a period of 120 μm. By scanning the sample plate in the direction perpendicular to the grating lines, the spatial resolution is also demonstrated according to the spacing of the poled structure.     

3C PIV and PLIF measurement in turbulent mixing

The present work focuses on the measurements of instantaneous concentration fields of a passive scalar due to an impinging round jet injection into a liquid filled rectangular tank. Simultaneous measurements of velocity and passive scalar concentration fields have been conducted by using Particle Image Velocimetry (planar 2C and 3C PIV) and Planar Laser Induced Fluorescence (PLIF) techniques. The mixing injection behavior is analyzed for several injection values of depth and flow rate. Results showed the classical developing and self-similar regions of the jet, the mixing layer and the coupled concentration and velocity fields due to impingement. Finally, 3C PIV reveals a 3D flow jet structure which seems to be a swirl that does not disturb 2D analysis.     

(Butadiene)metallocene/B(C6F5)3 pathway to catalyst systems for stereoselective methyl methacrylate polymerization: evidence for an anion dependent metallocene catalyzed polymerization process

The ansa-zirconocene dichlorides [Me(2)Si(C(5)H(4))(3-R-C(5)H(3))]ZrCl(2) 7a-e (R = H, CH(3), cyclohexyl, -CHMe(2), -CMe(3)) were reacted with butadiene-magnesium to yield the respective (eta(4)-butadiene)metallocenes 17a-e. The chiral examples give a mixture of two s-cis and two s-trans diastereomers. The strong Lewis acid B(C(6)F(5))(3) adds selectively to a terminal butadiene carbon atom to yield the (butadiene)metallocene/B(C(6)F(5))(3) betaine complexes 18a-e. Initially, the formation of the Z-18 isomers is preferred. These consecutively rearrange to the thermodynamically favored isomers E-18. The dipolar systems 18 are active single component metallocene catalysts for the stereospecific polymerization of methyl methacrylate. With increasing steric bulk of the attached single alkyl substituent an increasingly isotactic poly(methyl methacrylate) is obtained. A similar trend is observed in the methyl methacrylate polymerization at the [Me(2)Si(C(5)H(4))(3-R-C(5)H(3))]ZrCH(3)(+) catalysts (9a-e) that were conventionally prepared by methyl abstraction from the corresponding ansa-zirconocene dimethyl complexes by treatment with B(C(6)F(5))(3). A comparison of the poly(methyl methacrylates) obtained at these two series of catalysts has revealed substantial differences in stereoselectivity that probably originate from an influence of the respective counteranions. An initial reactive intermediate of methyl methacrylate addition to the dipolar single component metallocene catalyst E-18a was experimentally observed and characterized by NMR spectroscopy at 253 K. The subsequently formed series of [PMMA-C(4)H(6)(-)B(C(6)F(5))(3)](-) anion oligomers (at the catalyst 18c) was monitored (after quenching) and characterized by electrospray mass spectrometry.     

Solvent extraction of thorium from mixed organic — aqueous nitric acid media by try-n-octylphosphine oxide

The extraction equilibria of Th in tri-n-octylphosphine oxide (TOPO)–HNO₃–H₂O systems have been investigated in the absence and presence of water-miscible alcohols and acetone. The influence of TOPO concentration in an inert diluent (toluene) and the concentration of nitric acid and the water-miscible additives have been systematically examined. The slopes of the log-log plots of D_Th vs. the TOPO concentration (up to 0.02M) are found to be close to 3 over a wide range of polar phase compositions leading to a coordination number of 11 for Th. The D_Th values were determined as a function of the concentration of uranyl nitrate in the aqueous phase, while the effect of additives was also examined in the absence and presence of uranyl nitrate in the polar phase. The results show that at TOPO concentrations above about 2.5 · 10^–3 M (about 1%) in toluene, polymerization of the solvent occurs.     

Direct determination of reserpine in urine using excitation-emission fluorescence combined with three-way chemometric calibration methodologies

The concentration of reserpine in urine was directly and quantitatively measured by using the excitation-emission fluorescence (EEM) combined with three-way calibration methodologies. Two calibration methods are based on the alternating trilinear decomposition (ATLD) and the self-weighted alternating trilinear decomposition (SWATLD) algorithms, respectively. These chemometric methodologies have the second-order advantage, which is the ability to get accurate concentration estimates of interested analyte(s) even in the presence of uncalibrated interferences. The satisfactory results on spiked urine samples are obtained, when the component number was chosen to 3 (N = 3) for both the methods. This experiment is easily carried out without time-consuming and complicated pretreatment. It has proved that the three-way calibration methodologies based on ATLD and SWATLD can be feasible to directly quantify the medical content of reserpine in urine. __________ Translated from Chemical Journal of Chinese Universities, 2007, 28 (5): 827–830 [译自: 高等学校化学学报]     

Glycosynthase activity of hybrid aspen xyloglucan endo-transglycosylase PttXET16-34 nucleophile mutants

Glycosynthases are active-site mutants of glycoside hydrolases that catalyse glycosyl transfer using suitable activated donor substrates without competing product hydrolysis (S. M. Hancock, M. D. Vaughan and S. G. Withers, Curr. Opin. Chem. Biol., 2006, 10, 509-519). Site-directed mutagenesis of the catalytic nucleophile, Glu-85, of a Populus tremula x tremuloides xyloglucan endo-transglycosylase (PttXET16-34, EC 2.4.1.207) into alanine, glycine, and serine yielded enzymes with glycosynthase activity. Product analysis indicated that PttXET16-34 E85A in particular was able to catalyse regio- and stereospecific homo- and hetero-condensations of alpha-xylogluco-oligosaccharyl fluoride donors XXXGalphaF and XLLGalphaF to produce xyloglucans with regular sidechain substitution patterns. This substrate promiscuity contrasts that of the Humicola insolens Cel7B E197A glycosynthase, which was not able to polymerise the di-galactosylated substrate XLLGalphaF. The production of the PttXET16-34 E85A xyloglucosynthase thus expands the repertoire of glycosynthases to include those capable of synthesising structurally homogenenous xyloglucans for applications.     

Low-pressure gas chromatography: Recent trends and developments

In the past few years, low-pressure gas chromatography (LP-GC) has been applied for the fast analysis of various pollutants in different environmental and food matrices. A typical LP-GC set-up involves the use of a short microbore column (typically 0.5–1 m × 0.10 mm internal diameter) at the injector side connected with a zero dead-volume connector to a short megabore column (typically 10 m × 0.53 mm) to be used with higher gas velocities. This set-up maintains atmospheric injection conditions, while the analytical column is operated under low-pressure conditions that are compatible with mass-spectrometer analyzers. Although the use of LP-GC results in a loss of separation efficiency, it offers a 3–5-fold reduction in analysis time for organic compounds and thus increased sample throughput and enhancement of the signal-to-noise ratio leading to improved detection limits. Considering the significance of, and the potential interest in, this topic, this review briefly describes the concept of LP-GC. Furthermore, we explore recent developments and applications of LP-GC, with a focus on the use of various column systems and analyzers. Finally, we critically evaluate the prospects for, and the limitations of, LP-GC.     

用不对称法布里-珀罗薄膜测量极化聚合物的电光效应

报道用不对称的法布里－珀罗（AFP）多光束干涉膜测量极化聚合物的线性电光效应。将聚合物在有高反射膜的载体上旋涂成膜后进行电晕极化,利用聚合物自身的反射率和高反射膜构成不对称的法布里－珀罗膜,用这种聚合物电光薄膜的自由放置方法和反射式光路构造电光检测系统,测量了铟锡氧化物共同波导上的电信号,并对系统的工作原理进行了理论分析。结果表明,不对称的法布里－珀罗薄膜具有线性电光效应,在1kHz正弦波时系统得到了5mV/√Hz的电压灵敏度。     

Experimental Investigations of AlMg3 Components with Polyurethane and Graphene Oxide Nanosheets Composite Coatings,after Accelerated UV-Aging

The use of graphene (Gr) and its derivates graphene oxide (GO) showed that these materials are good candidates to enhance the properties of polyurethane (PU) coatings, especially the anticorrosion ones since graphene absorbs most of the light and provides hydrophobicity for repelling water. An important aspect of these multifunctional materials is that all these improvements can be realized even at very low filler loadings in the polymer matrix. In this work, an ultrasound cavitation technique was used for the proper dispersion of GO nanosheets (GON) in polyurethane (PU) resin to obtain a composite coating to protect the AlMg3 substrate. The addition of GON considerably improved the physical properties of coatings, as demonstrated by electrochemical impedance spectroscopy (EIS) analysis, promising improved anticorrosion performance after accelerated UV-ageing. Computational methods and Differential Scanning Calorimetry (DSC) measurements showed that GON facilitates the formation of additional bonds and stabilizes the PU structures during the ultraviolet (UV) exposure and aggressive attack of corrosive species. Limiting oxygen index (LOI) data reveal a slow burning behaviour of PU-GON coatings during UV exposure, which is better than PU alone.