Novel tricyclic diamines 3. Synthesis of 1,4-diazaadamantane

Synthesis of the previously unreported 1,4-diazaadamantane is described. The overall strategy involves complete saturation of a flat, aromatic heterocycle, appropriate functionalization and intramolecular double alkylation. The alkylation takes place via an iminophosphorane under anhydrous conditions, which produced superior results vs. alkylation of the corresponding primary amine.     

Nitric oxide binding and photodelivery based on ruthenium(II) complexes of 4-arylazo-3,5-dimethylpyrazole

Two fluorescent ligands, 3,5-dimethyl-4-(6'-sulfonylammonium-1'-azonaphthyl)pyrazole (dmpzn, 1) and 3,5-dimethyl-4-(4'-N,N'-dimethylaminoazophenyl)pyrazole (dmpza, 2) were obtained by condensation of ketoenolic derivatives with hydrazine. 1 and 2 formed the novel dinuclear complexes [(H(2)O)(3)ClRu(micro-L)(2)RuCl(H(2)O)(3)] (3 or 4) and [(H(2)O)(NO)Cl(2)Ru(micro-L)(2)RuCl(2)(NO)(H(2)O)] (6 or 7) (where L 1 = 2 or , respectively) which were characterized by IR, NMR and elemental analysis. The nitrosyl complexes were prepared by bubbling purified nitric oxide through methanol solutions of the corresponding ruthenium(II) chloroderivative or by reaction of the appropriate ligands with Ru(NO)Cl(3). Complexes 3 and 4 were found to bind NO, resulting in an increase in fluorescence. Ligand 1 also formed the mononuclear nitrosyl complex [Ru(NO)(bpy)(2)(dmpzn)]Cl(2) (8) which released NO in water at physiological pH and in the solid state as revealed by fluorescence and IR measurements, respectively.     

Covalent bond orders revisited: the open-shell case

This article states the concept of covalent bond order for open-shell systems from the invariance properties of the first- and second-order reduced density matrices for all the components of a multiplet state. A general bond order definition is formulated in the framework of the electronic population analyses in the Hilbert space of atomic orbitals.     

Molecular modeling of polymer-clay nanocomposite precursors: Lysine in montmorillonite interlayers

The layered structure of clays with interlayer cations leads to unique chemical and mechanical properties, which have been capitalized on in the field of polymer/layered silicate nanocomposites. Hydrophilic silica surfaces can become organophilic with the inclusion of alkylammonium cations, which improve the wetting characteristics of the polymer matrix. In fact, the molecular level interactions of amino acids, either natural or non-natural, with clay surfaces are at the heart of fields of study as diverse as nanocomposites fabrication, drug delivery, bio-remediation of soils and catalysis of biological polymers, to name a few. The ubiquity of these systems and the potential uses to which they could be put suggests the necessity of a deeper understanding of the interplay of bonds, conformations, and configurations between the molecules and the hosts. The interactions of the amino acid lysine with sodium montmorillonite were studied using theoretical molecular modeling methods. The interlayer spacing of montmorillonite was increased by incorporating water molecules and allowing the system to evolve with molecular mechanics. Care was taken to retain the sodium cations in the interlayer. The initial amino acid conformation was obtained surrounding the molecule with numerous discrete water molecules and minimizing the system at the semi empirical level. The optimized amino acid was then placed in the interlayer space in a series of initial positions. Molecular mechanics calculations were performed and the final positions were analyzed. The results tended to indicate the preponderance of configurations which included surface-sodium-amino acid complexes with a variety of spatial arrangements. These results were compared with molecular dynamics calculations of similar systems from the literature.     

(Liquid + liquid) equilibria of (water + linalool + limonene) ternary system at T = (298.15, 308.15, and 318.15) K

(Liquid + liquid) equilibrium (LLE) data for {water (1) + linalool (2) + limonene (3)} ternary system at T = (298.15, 308.15, and 318.15 ± 0.05) K are reported. The organic chemicals were quantified by gas chromatography using a flame ionisation detector while water was quantified using a thermal conductivity detector. The effect of the temperature on (liquid + liquid) equilibrium is determined and discussed. Experimental data for the ternary mixture are compared with values calculated by the NRTL and UNIQUAC equations, and predicted by means of the UNIFAC group contribution method. It is found that the UNIQUAC and NRTL models provide a good correlation of the solubility curve at these three temperatures, while comparing the calculated values with the experimental ones, the best fit is obtained with the NRTL model. Finally, the UNIFAC model provides poor results, since it predicts a greater heterogeneous region than experimentally observed.     

Quantification of fenitrothion and its main metabolites in poplar leaves by isotope dilution gas chromatography-mass spectrometry coupled with solid-phase microextraction

A sensitive and specific method for determining fenitrothion and its main metabolites, 3-methyl-4-nitrophenol and fenitrooxon, in poplar leaves using deuterated isotopes as the internal standard is described. The analytes and the labeled isotopes were extracted from leaves by solid-phase microextraction and subsequently analysed by gas chromatography coupled with mass spectrometry. The method had a chromatographic run time of 17.0 min and good linearity over the range 0.01-10 mg kg(-1). The detection limits ranged between 2.5 and 0.6 microg kg(-1). The isotopic dilution technique allowed improving significantly the repetitivity even using different fibers with the same coating (RSD<5.1%). The method was applied successfully to study the persistence of fenitrothion in forestal matrices in a poplar forest after cannon spray application of the insecticide.     

Efficient catalyst-free bi- and triaroylation of aromatic rings in a single step

The exceptional leaving group ability of the trimethylstannyl group in electrophilic aromatic substitutions makes possible the synthesis, in a single step, of bi- and triaroylarenes through the catalyst-free, regioselective reaction of bi- and tristannylarenes with different aroyl halides in o-dichlorobenzene as solvent. Specific di- and triketones are obtained in good to excellent yields (45-83%).     

Quantitative Nanoscale Secondary Ion Mass Spectrometry (NanoSIMS) Imaging of Individual Vesicles to Investigate the Relation between Fraction of Chemical Release and Vesicle Size

We used correlative transmission electron microscopy (TEM) and nanoscale secondary ion mass spectrometry (NanoSIMS) imaging to quantify the contents of subvesicular compartments, and to measure the partial release fraction of ¹³C-dopamine in cellular nanovesicles as a function of size. Three modes of exocytosis comprise full release, kiss-and-run, and partial release. The latter has been subject to scientific debate, despite a growing amount of supporting literature. We tailored culturing procedures to alter vesicle size and definitively show no size correlation with the fraction of partial release. In NanoSIMS images, vesicle content was indicated by the presence of isotopic dopamine, while vesicles which underwent partial release were identified by the presence of an ¹²⁷I-labelled drug, to which they were exposed during exocytosis allowing entry into the open vesicle prior to its closing again. Demonstration of similar partial release fractions indicates that this mode of exocytosis is predominant across a wide range of vesicle sizes.     

Spectrofluorimetric determination of benzoimidazolic pesticides: effect of p-sulfonatocalix[6]arene and cyclodextrins

The effect of the addition of a macrocyclic host (H) such as p-sulfonatocalix[6]arene (C6S), native and modified cyclodextrins (CDs), on the fluorescence of benzoimidazolic fungicides (P), like Benomyl (BY) and Carbendazim (CZ), has been studied. The fluorescence of BY in water at pH 1.000 and 25.0 degrees C was increased in the presence of C6S, alphaCD and hydroxypropyl-beta-CD (HPCD). The association constants determined by fluorescence enhancement showed weak interactions (K(A) approximately 10(1) to 10(2) M(-1)) between the fungicide with both CDs, whereas they were stronger with C6S (K(A) approximately 10(5) M(-1)). Molecular recognition of BY for C6S was mainly attributed to electrostatic interactions, and for CDs to the hydrophobic effect and hydrogen bond formation. On the other hand, the fluorescent behaviour of CZ in the presence of C6S at pH 6.994 was interpreted as the formation of two complexes with 1:1 (P:H) and 1:2 (P:H(2)) stoichiometry, the latter being less fluorescent than the free analyte. Relative fluorescence quantum yield ratios between the complexed and free BY (phi(P:H)/phi(P)) were 2.00+/-0.05, 1.40+/-0.03 and 2.8+/-0.4 for C6S, alphaCD and HPCD, respectively. The analytical parameters improved in the presence of C6S and CDs. The best limit of detection (L(D), ng mL(-1)) was 17.4+/-0.8 with HPCD. The proposed method with C6S and HPCD was successfully applied to fortified samples of tap water and orange flesh extract with good recoveries (91-106%) and R.S.D. (< or = 2%) by triplicate analysis. The method is rapid, direct and simple and needs no previous degradation or derivatization reaction.     

Stability of Plasma Treated Non-vulcanized Polybutadiene Surfaces: Role of Plasma Parameters and Influence of Additives

Surface modification studies of non-vulcanized BR elastomers (butadiene rubber) by low-pressure air plasma treatment and the effect on ageing and adhesion performances are presented in this paper. In particular, the influence of discharge power and distance from the glow discharge, and impact of antioxidant molecules in the BR formulation were examined. To characterize the changes to the BR surface, XPS spectroscopy, contact angle measurements, AFM nanoindentation experiments and tack measurements were utilized. Oxidation and crosslinking were the main mechanisms observed on the polymer chains regardless of the plasma conditions used. Beyond a certain threshold of plasma energy (in our case, discharge power of ~60 W and exposure time of ~30 s), a steady state was reached irrespective of the distance from the glow discharge. The presence of antioxidant molecules considerably reduced crosslinking phenomena while maintaining oxidation processes on polymer chains and increasing the nitrogen content in the near surface region. The mechanisms responsible for these differences have been identified. Interestingly, the COOH/C=O ratio changed according to the balance between oxidation and crosslinking. The hydrophobic recovery rate was mainly driven by temperature-dependent dynamics and varied according to the degree of crosslinking in the surface region. It was found to be lower in air atmosphere in the presence of antioxidant molecules. Finally, the presence of antioxidant molecules in the BR formulation allowed the adhesion performances after plasma exposure to significantly increase.