Live biotherapeutic products: the importance of a defined regulatory framework

Probiotics have been defined as “Live microorganisms that when administered in adequate amounts confer a health benefit on the host”. This definition covers a wide range of applications, target populations and (combinations of) microorganisms. Improved knowledge on the importance of the microbiota in terms of health and disease has further diversified the potential scope of a probiotic intervention, whether intended to reach the market as a food, a food supplement or a drug, depending on the intended use. However, the increased interest in the clinical application of probiotics may require specific attention given their administration in a diseased population. In addition to safety, the impact of the type of product, in terms of quality, production method and, e.g., the acceptance of side effects, is now part of the current regulatory constraints for developers. In the European Union, foods are regulated by the European Food Safety Authority and drugs by the European Medicines Agency; in the United States, the Food and Drug Administration (FDA) deals with both categories. More recently, the FDA has defined a new “live biotherapeutic products” (LBP) category, clarifying pharmaceutical expectations. Since 2019, the quality requirements for this category of drug products have also been clarified by the European Pharmacopoeia (Ph. Eur.). Similar to all products intended to prevent or treat diseases, LBPs will have to be registered as medicinal products to reach the market in the US and in Europe. In this area, regulatory authorities and the pharmaceutical industry will routinely use guidelines of the “International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use” (ICH). Although ICH guidelines are not legally binding, they provide very important recommendations, recognized by almost all drug authorities in the world. In this review, we discuss some aspects of this regulatory framework, especially focusing on products with an intended use in a diseased or vulnerable target population.Subject terms: Biological therapy, Biologics     

New nickel(II), copper(II), platinum(II) and palladium(II) complexes of a multidentate sulfur–nitrogen chelating agent

A new, potentially polydentate sulfur–nitrogen chelating agent, 2,6–bis(N-methyl-S-methyldithiocarbazato)pyridine (L) has been synthesized and characterized. With nickel(II) salts, the ligand yields complexes of empirical formula NiLX2·nH2O (X=Cl−, NCS− or NO3−; n=0 or 1) in which it behaves as a quadridentate NSSN chelating agent, coordinating to the nickel(II) ion via the two amino nitrogen atoms and the two sulfur atoms. Magnetic and spectral evidence support a distorted octahedral structure for these complexes. The ligand reacts with copper(II), platinum(II) and palladium(II) salts to yield homo-binuclear complexes of general formula [M2LX4]·nSol (M=CuII, PtII or PdII; X=Cl− or Br−; n=0.5, 1 or 2; Sol=H2O, MeOH or MeCOMe), in which each of the metal ions is in a square-planar environment. These complexes have been characterized by a variety of physicochemical techniques. This revised version was published online in June 2006 with corrections to the Cover Date.     

1H-pyrazolo[3,4-d]thieno[2,3-b]pyridine and its derivatives

The synthesis of the parent ring system and some of the derivatives of 1H-pyrazolo[3,4-d]thieno[2,3-b]pyridine are described.     

Ligand requirements for glmS ribozyme self-cleavage

Natural RNA catalysts (ribozymes) perform essential reactions in biological RNA processing and protein synthesis, whereby catalysis is intrinsic to RNA structure alone or in combination with metal ion cofactors. The recently discovered glmS ribozyme is unique in that it functions as a glucosamine-6-phosphate (GlcN6P)-dependent catalyst believed to enable "riboswitch" regulation of amino-sugar biosynthesis in certain prokaryotes. However, it is unclear whether GlcN6P functions as an effector or coenzyme to promote ribozyme self-cleavage. Herein, we demonstrate that ligand is absolutely requisite for glmS ribozyme self-cleavage activity. Furthermore, catalysis both requires and is dependent upon the acid dissociation constant (pKa) of the amine functionality of GlcN6P and related compounds. The data demonstrate that ligand is integral to catalysis, consistent with a coenzyme role for GlcN6P and illustrating an expanded capacity for biological RNA catalysis.     

Simultaneous tailoring of surface topography and chemical structure for controlled wettability

Wettability was controlled in a rational manner by individually and simultaneously manipulating surface topography and surface chemical structure. The first stage of this research involved the adsorption of charged submicrometer polystyrene latex particles to oppositely charged poly(ethylene terephthalate) (PET) film samples to form surfaces with different topographies/roughness; adsorption time, solution pH, solution ionic strength, latex particle size, and substrate charge density are external variables that were controlled. The introduction of discrete functional groups to smooth and rough surfaces through organic transformations was carried out in the second stage. Amine groups (-NH(2)) and alcohol groups (-OH) were introduced onto smooth PET surfaces by amidation with poly(allylamine) and adsorption with poly(vinyl alcohol) (PVOH), respectively. On latex particle adsorbed surfaces, a thin layer of gold was evaporated first to prevent particle redistribution before chemical transformation. Reactions with functionalized thiols and adsorption with PVOH on patterned gold surfaces successfully enhanced surface hydrophobicity and hydrophilicity. Particle size and biomodal particle size distribution affect both hydrophobicity and hydrophilicity. A very hydrophobic surface exhibiting water contact angles of 150 degrees /126 degrees (theta(A)/theta(R)) prepared by adsorption of 1-octadecanethiol and a hydrophilic surface with water contact angles of 18 degrees /8 degrees (theta(A)/theta(R)) prepared by adsorption of PVOH were prepared on gold-coated surfaces containing both 0.35 and 0.1 microm latex particles. The combination of surface topography and surface-chemical functionality permits wettability control over a wide range.     

Rotational spectroscopy and equilibrium structures of S3 and S4

The sulfur molecules thiozone S3 and tetrasulfur S4 have been observed in a supersonic molecular beam in the centimeter-wave band by Fourier transform microwave spectroscopy, and in the millimeter- and submillimeter-wave bands in a low-pressure glow discharge. For S3 over 150 rotational transitions between 10 and 458 GHz were measured, and for S4 a comparable number between 6 and 271 GHz. The spectrum of S3 is reproduced to within the measurement uncertainties by an asymmetric top Hamiltonian with three rotational and 12 centrifugal distortion constants; ten distortion constants, but an additional term to account for very small level shifts caused by interchange tunneling, are required to reproduce to comparable accuracy the spectrum of S4. Empirical equilibrium (r(e)(emp)) structures of S3 and S4 were derived from experimental rotational constants of the normal and sulfur-34 species and vibrational corrections from coupled-cluster theory calculations. Quantum chemical calculations show that interchange tunneling occurs because S4 automerizes through a transition state with D2h symmetry which lies about 500 cm(-1) above the two equivalent C2upsilon minima on the potential energy surface.     

PHOTOREAaIVITY OF CHLORAMPHENICOL in vitro AND in vivo

Abstract The negative side effects of chlorarnphenicol (CAP) mostly involve blood dyscrasias (e.g. irreversible nondose-dependent aplastic anemia), allergic skin reactions and eye damage. To learn the cause of these side effects, most research focuses on metabolically formed nitroso- and hydroxylamino derivatives in the predisposed patient. In previous investigations it was demonstrated that photochemical decomposition of CAP in vitro by UV-A leads to formation of p-nitrobenzaldehyde (pNB), p-nitrobenzoic acid (pNBA) and p-nitrosobenzoic acid (pNOBA); the latter comprises up to 45 mol% of the starting amount of CAP. Incubation of these photoproducts in rat blood showed that pNB and pNOBA rapidly react and that PNBA is stable under these conditions. Reaction products from pNB (half-life 1.7 min) proved to be pNBA and p-nitrobenzyl alcohol (pNBOH) while pNOBA (half-life 3.7 min) was converted into p-aminobenzoic acid (pABA). Exposure of CAP in rat blood to UV-A yielded the same end products: pNBA, PABA and pNBOH. To estimate the amount of oxidative stress generated in vivo by these compounds, the ability to form methemoglobin (MetHb) in erythrocytes was tested; only pNOBA and p-hydroxylaminobenzoic acid (pHABA), a possible intermediate in the decomposition of pNOBA, proved to be reactive. Ultraviolet-A exposure of rats, after intraperitoneal injection of CAP, led to 3.6 times the basic level of MetHb. In addition, covalent binding of ³H-labeled CAP photoproducts to the skin of the back and to the ears was found, which was 9.1 and 3.2 times higher, respectively, than the dark values. Toxicity toward bone marrow cells of all photoproducts was established in vitro. p-Nitrobenzaldehyde, pNOBA andpHABA were 20, 6 and 6 times more toxic than CAP, respectively. These results show that photodecomposition of CAP in vivo does occur. Its reactive photoproducts are able to cause damage that may lead to (systemic) side effects. The latter is supported by the fact that the nature of the reactive products, nitroso- and hydroxylamino derivatives, is the same as the expected metabolites.     

Analytical chemistry and the cone penetrometer: In situ chemical characterization of the subsurface

The development of novel microanalytical techniques forin situ chemical characterization of the terrestrial subsurface environment has grown significantly over the last decade, particularly those instruments that are interfaced to the cone penetrometer. Cone penetrometer testing (CPT) has emerged as an effective means to introduce samplers and probes forin situ analysis of contaminants in soil and groundwater matrices. A variety ofin situ chemical samplers for CPT have been developed that can be driven into the subsurface to collect soil gas, groundwater, or soil samples at depth, thus providing a means of determining the vertical and horizontal extent of contamination. Cone penetrometer testing is also being explored as a means to deliverin situ subsurface sensor probes, including probes based on laser-induced fluorescence, Raman, and infrared spectroscopies for organics; on laser-induced breakdown and X-ray fluorescence spectroscopies for heavy metals; and on passive gamma-ray spectroscopy for radionuclides. The range of analytical technologies used in CPT for the determination of organic and inorganic species in the subsurface is described.