Stability-indicating capillary electrophoresis method for the simultaneous determination of metformin hydrochloride,saxagliptin hydrochloride,and dapagliflozin in pharmaceutical tablets

A capillary electrophoretic method coupled to a diode array detector (CE-DAD) was developed and validated for the simultaneous determination of metformin hydrochloride (MET), the dipeptidyl peptidase-4 (DPP-4) inhibitor saxagliptin hydrochloride (SAX), and the sodium glucose co-transporter (SGLT 2) inhibitor dapagliflozin (DAP). The proposed method was used for the determination of these drugs in binary antidiabetic combinations namely, SAX/MET, combination I, DAP/MET, combination II, and SAX/DAP, combination III. CE separation was performed on a fused silica capillary with background electrolyte consisting of 30?mM phosphate buffer (pH 6.0) with a high voltage of 30?kV, a pressure of 20 mbar, and an injection time of 40?s. The compounds were detected at 203?nm for SAX/DAP and 250?nm for MET. The method was linear in the concentration range of 10–200?µ?g/mL (SAX), 1.25–50?µ?g/mL (DAP), and 7.5–1000?µ?g/mL (MET). Full validation of the proposed method was performed as per the ICH guidelines. The obtained errors and deviation values did not exceed 2% assessing good accuracy and precision, respectively. The stability-indicating potential of the proposed method was proved under different stress-degradation conditions. The proposed method was successfully applied to the analysis of the three binary combinations in their tablets.     

Adsorption of Acetate on Au(111): An in-situ Scanning Tunnelling Microscopy Study and Implications on Formic Acid Electrooxidation

The adsorption of acetate on an Au(111) electrode surface in contact with acetic acid at pH 2.7 was imaged in-situ using scanning tunnelling microscopy (STM). Two different ordered structures were imaged for acetate adsorbed in the bidentate configuration on the unreconstructed surface at 0.95 V (vs. the saturated calomel electrode, SCE). The first structure, , is metastable and transforms at constant potential within 20 minutes to a structure, which is thermodynamically more favourable. The acetate adlayer starts to form at step edges and propagates via nucleation and growth onto terraces. The findings from in-situ STM are in agreement with the electrochemical behaviour of acetate on Au(111) characterized by voltammetry. A comparison is made with formate adsorption on Au(111). While acetate is not reactive, in contrast to formate, it can act as a spectator species in formic acid electrooxidation.     

A green approach to the synthesis of 2,3‐diaminophenazine using a photocatalytic system of CdFe2O4/TiO2 nanoparticles

In recent years, the development of novel green chemistry routes for the synthesis of organic compounds has become very attractive to many research groups. Nanoparticles have been widely used because of their potential applications in catalysis, environmental remediation, electronic fields, biomedical, and industrial fields. In this article, a rapid, efficient, and simple approach was applied for the synthesis of 2,3‐diaminophenazine using a new photocatalytic system of CdFe₂O₄/TiO₂ nanoparticles in water as a benign solvent. The structure of the synthesized CdFe₂O₄/TiO₂ nanoparticle was confirmed using different methods such as transmission electron microscope (TEM), X‐ray diffraction (XRD), and magnetic measurements. It was found that the rate and yield of the photocatalytic synthesis of 2,3‐diaminophenazine were improved using CdFe₂O₄/TiO₂ nanoparticles compared to other methods.     

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016–2018)

One of the most cited limitations of capillary and microchip electrophoresis is the poor sensitivity. This review continues to update this series of biannual reviews, first published in Electrophoresis in 2007, on developments in the field of online/in‐line concentration methods in capillaries and microchips, covering the period July 2016–June 2018. It includes developments in the field of stacking, covering all methods from field‐amplified sample stacking and large‐volume sample stacking, through to isotachophoresis, dynamic pH junction, and sweeping. Attention is also given to online or in‐line extraction methods that have been used for electrophoresis.     

Efficiencies of Low-Level Laser Therapy (LLLT) and Gabapentin in the Management of Peripheral Neuropathy: Diabetic Neuropathy

Diabetic neuropathy (DN) is the highly occurred complication of diabetes mellitus; it has been defined as an event of peripheral nerve dysfunction characterized by pain, allodynia, hyperalgesia, and paraesthesia. The current study was conducted to evaluate the efficacy of low-level laser therapy (LLLT) in the management of neuropathy in diabetic rats. The used animals were divided into the following groups: negative control, streptozotocin-induced diabetic rats, and diabetic rats with peripheral neuropathy (DNP) and DNP treated with gabapentin or with LLLT. Behavioral tests were carried out through hotplate test for the determination of pain sensations and the Morris water maze test for spatial reference memory evaluation. Blood samples were collected at the end of treatment for biochemical determinations. In the current study, the latency of hind-paw lick decreased significantly when DNP are treated with gabapentin or LLLT. The Morris water maze test showed that LLLT treatment improved memory that deteriorated in DNP more than gabapentin do. The results of the biochemical study revealed that LLLT could not affect the level of beta-endorphin that decreased in DNP but significantly decreased S100B that rose in DNP. PGE2 and cytokines IL-1β, IL-10, and TNF-α showed significant increase in DNP compared with control group. The gabapentin administration or LLLT application significantly reversed the levels of the mentioned markers towards the normal values of the controls. Levels of serum MDA and nitric oxide increased significantly in the DNP but rGSH showed significant decrease. These markers were improved significantly when the DNP were treated with gabapentin or LLLT. The treatment with gabapentin or LLLT significantly decreased the raised level in total cholesterol in DNP but could not decrease the elevated level of triglycerides, while LDL cholesterol decreased significantly in DNP treated with gabapentin but not affected by LLLT. Values of serum alanine aminotransferase (ALAT), aspartate aminotransferase (ASAT), urea, and creatinine increased significantly in the DPN and diabetic rats without peripheral neuropathy (PN) compared with control group. The treatment of DNP with gabapentin induced significant increases in ALAT and ASAT activities but LLLT treatment induced significant decreases in ALAT and ASAT activities as compared with DNP group. Neither gabapentin nor LLLT could improve the elevated levels of serum urea and creatinine in the DNP. It could be concluded that LLLT is more safe and effective than gabapentin in the management of neuropathy in diabetic rats.     

Recent progress in the development of immobilized penicillin G acylase for chemical and industrial applications: A mini‐review

Immobilized penicillin G acylase (PGA) as an important industrial catalyst can catalyze penicillin G potassium (PG) to 6‐aminopenicillanic acid (6‐APA). 6‐APA is an important intermediate for semisynthetic penicillin drugs, which occupies a huge market space in the anti‐inflammatory field; as a result, immobilized PGA occupies a huge market space in the pharmaceutical field. However, at present, there are different degrees of defects in the preparation and production process of immobilized PGAs on the market because of the huge demand; therefore, the performance of immobilized PGA and its productivity will bring huge economic benefits to enterprises. Therefore, research on immobilized PGA has always been a focus. This review first introduces the source, classification, structure, and catalytic mechanism of PGA and then studies the development of immobilization methods, immobilized carriers, reaction media, enzyme activity regeneration, and reactors of immobilized PGA in recent years.     

Reactivity of sugar cane bagasse as a natural solid phase extractor for selective removal of Fe(III) and heavy-metal ions from natural water samples

This work introduces the feasibility of using sugar cane bagasse (SCB) – a sugar cane industry waste – as a selective solid phase extractor for Fe(III). The order of metal uptake capacities in μmol g^?1 for the extraction of six tested metal ions from aqueous solution using static technique is Fe(III) > Cu(II) > Pb(II) > Zn(II) > Cd(II) > Co(II). Since SCB exhibits remarkable binding characteristics for Fe(III), special interest was devoted for optimizing its uptake and studying its selectivity properties under static and dynamic conditions. In this respect, batch experiments were carried out at the pH range 1.0–4.0, initial concentration of metal ion (10–100 μmol), weight of phase (25, 50, 75, 100, 125 and 150 mg) and shaking time (10, 30, 45, 60, 90, 120 and 150 min). FT-IR spectra of SCB before and after uptake of Fe(III) were recorded to explore the nature of the functional groups responsible for binding of Fe(III) onto the studied natural biosorbent. The equilibrium data were better fitted with Langmuir model (r² = 0.985) than Freundlich model (r² = 0.934). Moreover, Fe(III) sorption was fast and completed within 60 min. The adsorption kinetics data were best fitted with the pseudo-second-order type. As a view to find a suitable application of SCB based on its unique property as a benign sorbent, it was found that, Fe(III) spiked natural water samples such as doubly distilled water (DDW), drinking tap water (DTW), natural drinking water (NDW), ground water (GW) and Nile River water (NRW) was quantitatively recovered (>95.0%) using batch and column experiments, with no matrix interferences.     

Simulation of ion beam extraction and focusing system

The characteristics of ion beam extraction and focused to a volume as small as possible were investigated with the aid of computer code SIMION 3D version 7.This has been used to evaluate the extraction characteristics(accel-decel system)to generate an ion beam with low beam emittance and high brightness.The simulation process can provide a good study for optimizing the extraction and focusing system of the ion beam without any losses and transported to the required target.Also,a study of a simulation model for the extraction system of the ion source was used to describe the possible plasma boundary curvatures during the ion extraction that may be affected by the change in an extraction potential with a constant plasma density meniscus.     

New Amphiphilic Ionic Liquids for the Demulsification of Water-in-Heavy Crude Oil Emulsion

This work aimed to use abietic acid (AA), as a widely available natural product, as a precursor for the synthesis of two new amphiphilic ionic liquids (AILs) and apply them as effective demulsifiers for water-in-crude oil (W/O) emulsions. AA was esterified using tetraethylene glycol (TEG) in the presence of p-toluene sulfonic acid (PTSA) as a catalyst obtaining the corresponding ester (AATG). AATG was reacted with 1-vinylimidazole (VIM) throughout the Diels–Alder reaction, forming the corresponding adduct (ATI). Following this, ATI was quaternized using alkyl iodides, ethyl iodide (EI), and hexyl iodide (HI) to obtain the corresponding AILs, ATEI-IL, and ATHI-IL, respectively. The chemical structure, surface activity, thermal stability, and relative solubility number (RSN) were investigated using different techniques. The efficiency of ATEI-IL and ATHI-IL to demulsify W/O emulsions in different crude oil: brine volumetric ratios were evaluated. ATEI-IL and ATHI-IL achieved promising results as demulsifiers. Their demulsification efficiency increased as the brine ratios decreased where their efficiency reached 100% at the crude oil: brine ratio (90:10), even at low concentrations.     

Bisthiol-Assisted Multilayers' Self-Assembly of Gold Nanoparticles: Synthesis,Characterization, Size Control and Electrocatalytic Applications

The layer-by-layer (LBL) approach has been utilized to self-assemble multilayers films of citrate-stabilized gold nanoparticles (AuNPs) on polycrystalline gold (poly-Au) substrates. 1,4-benzenedimethanethiol (BDMT) was used as a cross linker to bind every two successive AuNPs layers. The transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) techniques were employed to confirm the existence of the alternative layers of AuNPs and BDMT in the self-assembled multilayers film. The AuNPs modified poly-Au electrode showed a significant electrocatalysis towards the reduction of oxygen (a positive potential shift of about 100 mV was observed in the reduction peak potential compared to that obtained at the bare poly-Au electrode). The AuNPs tend to aggregate during their assembling to different extent which markedly depends on the substrate geometry and roughness. An effort was dedicated to understand and control the aggregation phenomenon.