Single nanocrystal arrays on patterned poly(ethylene glycol) copolymer microstructures using selective wetting and drying

Single nanocrystal arrays were fabricated on sub-microwells of poly(ethylene glycol) (PEG) copolymer using selective wetting on the hydrophilic regions of the exposed substrate surface and subsequent drying. Templates were produced by molding a thin film of a PEG-based random copolymer on hydrophilic substrates such as glass or silicon dioxide. The polymeric microstructures provide a topographical barrier around the well, which makes it possible to create nanocrystal arrays with controlled geometrical features. The size of the nanocrystal was found to decrease with decreasing well size and also decrease with decreasing topological height. A simple empirical equation was derived to predict the size of the crystal as a function of the pattern size and height, which is in good agreement with the experimental data.     

Densities,Ultrasonic Speeds,Viscosities and Refractive Indices of Binary Mixtures of Benzene with Benzyl Alcohol,Benzonitrile, Benzoyl Chloride and Chlorobenzene at 303.15 K

Densities,ρ, ultrasonic speeds, u, viscosities,η, and refractive indices, n, of pure benzene, benzyl alcohol (BA), benzonitrile (BN), benzoyl chloride (BC), chlorobenzene (CB) and their thirty six binary mixtures, with benzene as common component, were measured at 303.15 K over the entire mole fraction range. From these experimental data the values of deviations in ultrasonic speed, △u, isentropic compressibility, △k_s,excess acoustic impedance, Z^E, deviation in viscosity, Dh, and excess Gibbs free energy of activation of viscous flow, G^*E, and partial molar isentropic compressibility, Kφ,2⁰ of BA, BN, BC and CB in benzene were computed. The variation of these derived functions with composition of the mixtures suggested the increased cohesion (molecular order) in the solution and that interaction (A-B)＞(A-A) or (B-B).Moreover, theoretical prediction of ultrasonic speed, viscosity and refractive index of all the four binary mixtures was made on the basis of empirical and semi-empirical relations by using the experimental values of the pure components. Comparison of theoretical results with the experimental values was made in order to assess the suitability of these relations in reproducing the experimental values of u, η and n. Also, molecular radii of pure liquids and the average molecular radii of binary mixtures were evaluated using the corresponding refractive indices of pure liquids and binary mixtures. The average molecular radii of binary mixtures were found to be additive with respect to mole fraction of the pure component.     

Ion exchangers as catalysts. II. Catalytic decomposition of hydrogen peroxide with resin-ethylenediamine-copper(II) complex ions

Summary The slow decomposition of H₂O₂ in the presence of Dowex-50 W resin in the form of an ethylenediaminecopper(II) complex ion in water is accompanied by an induction period. The reaction is first order with respect to [H₂O₂] and the rate constant (perg of dry resin) was deduced. Autocatalytic behaviour was found for the H₂O₂ decomposition with 2% crosslinked divinylbenzene. The induction period disappeared and the reaction rate increased when the decomposition was carried out with a resin in the form of a peroxo-copper complex, which proves that the formation of an intermediate (active species) retards the reaction rate. The precursor of the active species, formed during the induction period, was not the amine-copper(II) complex ion but a product of the latter with H₂O₂. It proved impossible to carry out the decomposition in acid or buffer solutions, in which the resin is regenerated.     

The thermal dissociation of some metal cupferrate chelates

The thermal dissociation of the cupferron complexes with Cu(II), Ni, Co(II), Zn, Cd, Mn(II), Hg(II), Mg, Ca, Ba, Sr, Al, Fe(III). Ce(III), La, and Nd was studied by differential thermal analysis (DTA) and by pyrolysis into a mass spectrometer. The DTA curves consisted mainly of endothermic peaks although some contained exothermic peaks as well. The mass spectrometer showed that cupferron decomposes slightly above room temperature, giving off N₂, NO, N₂O, NH₃ and H₂O. A mechanism for the thermal dissociation of the coppcr(II) cupferrate is proposed.     

A heterocyclic peptide nanotube

An open-ended hollow tubular structure is designed based on hydrogen-bond-directed self-assembly of a chimeric cyclic peptide subunit comprised of alternating alpha- and epsilon-amino acids. The design features a novel 1,4-disubstituted-1,2,3-triazole epsilon-amino acid and its utility as a peptide backbone substitute. The N-Fmoc-protected epsilon-amino acid was synthesized in high yield and optical purity in three steps from readily available starting materials and was employed in solid-phase peptide synthesis to afford the desired cyclic peptide structure. The cyclic peptide self-assembly has been studied in solution by (1)H NMR and mass spectrometry and the resulting tubular ensemble characterized in the solid state by X-ray crystallography.     

Comparison of analytical techniques to quantify malondialdehyde in milk powders

Several analytical methods were compared to quantify malondialdehyde (MDA) in milk powders. Modified thiobarbituric acid (TBA) methods, using either visible spectrophotometry (direct absorbance reading or after third derivative transformation of the spectrum) or HPLC, required derivatisation at elevated temperature, which appeared to catalyse artefactual MDA formation and thus overestimate the MDA content. In contrast to the TBA derivatisation method, the measurement of MDA as the dinitrophenylhydrazone derivative by HPLC or as the phenylhydrazone product by GC-MS with a deuterated internal standard resulted in lower estimates in the ranges of 2-17- and 3-30-fold, respectively; apparently due to the milder derivatisation conditions. The estimates of MDA determined by both HPLC-UV and GC-MS techniques result in lower values which are similar in magnitude even though the GC-MS technique is more sensitive.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Computer-assisted optimization of reversed-phase HPLC isocratic separation of neutral compounds

An appropriate optimization strategy should be used to find a desired resolution or selectivity with a minimum number of experiments in a limited time, which could assure the baseline separation of all target compounds. It was usually realized by means of a specialized computer program. In this paper, mapping optimization method and overlapping resolution mapping were compared for the optimization of a reversed-phase high-performance liquid chromatography (HPLC) isocratic separation of neutral compounds. The calculated resolutions and separation time of 7 to 10 experiments are fitted by different equations, which were used to build a contour plot with a minimum effective resolution and maximum retention time as a function of a mobile phase composition. The balance between resolution and analysis time could be easily realized by the overlapping of the final overlapping resolution mapping and analysis time mapping. The validity of the two methods was confirmed by some typical experiments. The models are simple, visual, and common without theoretical arithmetic.     

Umbellactal, a novel diterpenoid from the Formosan soft coral Xenia umbellata

Umbellactal, isolated from the soft coral Xenia umbellata, is an unprecedented diterpenoid. The structure of umbellactal was established by extensive analysis of spectroscopic data.     

Structures and energies of seleno derivatives of biuret.Ab Initio comparative studies of diselenobiuret, selenobiuret, and selenothiobiuret

Ab initio studies (LCAO-MO method) on conformers of three seleno derivatives of the biuret molecules diselenobiuret [I], selenobiuret [II], and selenothiobiuret [III] were carried out at the Hartree-Fock (HF) and MP2 levels. The molecular geometries of these species were fully optimized at the HF level and characterized by analysis of the harmonic vibrational frequencies using a split-valence triple-zeta basis set augmented by a set ofd polarization functions on heavy atoms andp polarization functions on hydrogen atoms [TZP(d, p)]. The total energies of the HF-optimized structures were calculated at the MP2 (frozen core) level using a larger TZP (2df, 2pd) basis set. The potential energy searches revealed a total of 11 minimum-energy conformers (assigned astrans-trans, trans-cis, cis-trans, andcis-cis) and seven transition-state species for the title molecules. The two predicted conformers for diselenobiuret (Ia=trans-trans andIc=cis-cis) are characterized byC ₂ and the third byC _s symmetry. For selenothiobiuret two forms (IIIa=trans-trans andIIId=cis-cis) possessC ₁ and two (IIIb=trans-cis andIIIc=cis-trans) possessC _s symmetries, respectively. For selenobiuret, four formsIIa=trans-trans (C₁),IIb=trans-cis (C _s),IIc=cis-trans (C ₁), andIId=cis-cis (C₁), were obtained as a result of gradient optimization. Comparison of the relative energies for the considered species indicated that thecis-trans forms are the most stable conformations for all three systems at both the HF and MP2 levels of theory.