Comparison of analytical techniques to quantify malondialdehyde in milk powders

Several analytical methods were compared to quantify malondialdehyde (MDA) in milk powders. Modified thiobarbituric acid (TBA) methods, using either visible spectrophotometry (direct absorbance reading or after third derivative transformation of the spectrum) or HPLC, required derivatisation at elevated temperature, which appeared to catalyse artefactual MDA formation and thus overestimate the MDA content. In contrast to the TBA derivatisation method, the measurement of MDA as the dinitrophenylhydrazone derivative by HPLC or as the phenylhydrazone product by GC-MS with a deuterated internal standard resulted in lower estimates in the ranges of 2-17- and 3-30-fold, respectively; apparently due to the milder derivatisation conditions. The estimates of MDA determined by both HPLC-UV and GC-MS techniques result in lower values which are similar in magnitude even though the GC-MS technique is more sensitive.     

Analysis of selected pesticides and alkylphenols in human cord blood by gas chromatograph-mass spectrometer

A total of seven pesticides and eight alkylphenols were monitored using this method for the determination of their trace levels in human cord blood. The pesticides are lindane, diazinon, α-endosulfan, β-endosulfan, endosulfan sulfate, chlorpyrifos and endrin; while the alkylphenols are 4-n-butylphenol, 4-n-pentylphenol, 4-n-hexylphenol, 4-t-octylphenol, 4-n-heptylphenol, nonylphenol, 4-n-octylphenol and bisphenol A. The pesticides and alkylphenols in the cord blood samples were extracted with solid phase extraction IST C18 cartridges and analyzed by selected ion monitoring mode using quadrapole detector in Shimadzu QP-5000 gas chromatograph-mass spectrometer. Trace levels of pesticide and alkylphenols in the range of non-detectable to 15.17 ng ml⁻¹, were detected in the human cord blood samples. This technique of monitoring the levels of endocrine-disruptors in blood samples is consistent, reliable and cost effective while reducing wastage of time and solvents.     

Computer-assisted optimization of reversed-phase HPLC isocratic separation of neutral compounds

An appropriate optimization strategy should be used to find a desired resolution or selectivity with a minimum number of experiments in a limited time, which could assure the baseline separation of all target compounds. It was usually realized by means of a specialized computer program. In this paper, mapping optimization method and overlapping resolution mapping were compared for the optimization of a reversed-phase high-performance liquid chromatography (HPLC) isocratic separation of neutral compounds. The calculated resolutions and separation time of 7 to 10 experiments are fitted by different equations, which were used to build a contour plot with a minimum effective resolution and maximum retention time as a function of a mobile phase composition. The balance between resolution and analysis time could be easily realized by the overlapping of the final overlapping resolution mapping and analysis time mapping. The validity of the two methods was confirmed by some typical experiments. The models are simple, visual, and common without theoretical arithmetic.     

Umbellactal, a novel diterpenoid from the Formosan soft coral Xenia umbellata

Umbellactal, isolated from the soft coral Xenia umbellata, is an unprecedented diterpenoid. The structure of umbellactal was established by extensive analysis of spectroscopic data.     

Structures and energies of seleno derivatives of biuret.Ab Initio comparative studies of diselenobiuret, selenobiuret, and selenothiobiuret

Ab initio studies (LCAO-MO method) on conformers of three seleno derivatives of the biuret molecules diselenobiuret [I], selenobiuret [II], and selenothiobiuret [III] were carried out at the Hartree-Fock (HF) and MP2 levels. The molecular geometries of these species were fully optimized at the HF level and characterized by analysis of the harmonic vibrational frequencies using a split-valence triple-zeta basis set augmented by a set ofd polarization functions on heavy atoms andp polarization functions on hydrogen atoms [TZP(d, p)]. The total energies of the HF-optimized structures were calculated at the MP2 (frozen core) level using a larger TZP (2df, 2pd) basis set. The potential energy searches revealed a total of 11 minimum-energy conformers (assigned astrans-trans, trans-cis, cis-trans, andcis-cis) and seven transition-state species for the title molecules. The two predicted conformers for diselenobiuret (Ia=trans-trans andIc=cis-cis) are characterized byC ₂ and the third byC _s symmetry. For selenothiobiuret two forms (IIIa=trans-trans andIIId=cis-cis) possessC ₁ and two (IIIb=trans-cis andIIIc=cis-trans) possessC _s symmetries, respectively. For selenobiuret, four formsIIa=trans-trans (C₁),IIb=trans-cis (C _s),IIc=cis-trans (C ₁), andIId=cis-cis (C₁), were obtained as a result of gradient optimization. Comparison of the relative energies for the considered species indicated that thecis-trans forms are the most stable conformations for all three systems at both the HF and MP2 levels of theory.     

Transient streaming potential in a finite length microchannel

Pressure-driven flow of an electrolyte solution in a microchannel with charged solid surfaces induces a streaming potential across the microchannel. Such a flow also causes rejection of ions by the microchannel, leading to different concentrations in the feed and permeate reservoirs connecting the capillary, which forms the basis of membrane based separation of electrolytes. Modeling approaches traditionally employed to assess the streaming potential development and ion rejection by capillaries often present a confusing picture of the governing electrochemical transport processes. In this paper, a transient numerical simulation of electrochemical transport process leading to the development of a streaming potential across a finite length circular cylindrical microchannel connecting two infinite reservoirs is presented. The solution based on finite element analysis shows the transient development of ionic concentrations, electric fields, and the streaming potential over the length of the microchannel. The transient analysis presented here resolves several contradictions between the two types of modeling approaches employed in assessing streaming potential development and ion rejection. The simulation results show that the streaming potential across the channel is predominantly set up at the timescale of the developing convective transport, while the equilibrium ion concentrations are developed over a considerably longer duration.     

Chemical Sensors for Electronic Nose Systems

Chemical sensors have been widely used for the analysis of volatile organic compounds. Employing chemical sensors in an array format with pattern recognition provides a higher degree of selectivity and reversibility leading to an extensive range of applications. When such systems are used for odour analysis they are termed electronic noses. Application of electronic noses ranges from the food industry, medical industry to environmental monitoring and process control. Many types of different gas sensors have been employed in the array. These include conducting polymers, metal oxide semiconductors, piezoelectric, optical fluorescence and amperometric gas sensors The transducer principle of these sensors is varied and is discussed in detail within this review. Examples of the current trends in sensor array technology as well as the applications to which the sensor-based noses have been applied are also discussed.     

From a biogenetic scenario to a synthesis of the ABC ring of manzamine A

On the basis of a biogenetic proposal for explaining the biogenesis of manzamine A, the cycloaddition of dihydropyridinium salt 26 with diene derivative 5 leads to adducts 27. These adducts, as well as their related and previously described analogues 9, are now shown to be precursors of diene derivatives such as 10, 13, and 28. Treatment of diene 32 with sodium azide resulted in a one-step formation of the tricyclic imino derivative 34. This key intermediate was further transformed into tricyclic derivative 40, which possesses the essential features of the ABC ring of manzamine A.     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS. XVIII. INDOMETHACIN

Abstract— The photochemistry, photophysics, and photosensitization (Type I and II) of indomethacin (IN) (N-[p-chlorobenzoyl]-5-methoxy-2-methylindole-3-acetic acid) has been studied in a variety of solvents using NMR, high performance liquid chromatography-mass spectroscopy, transient spectroscopy, electron paramagnetic resonance in conjunction with the spin trapping technique, and the direct detection of singlet molecular oxygen (^l O₂) luminescence. Photodecomposition of IN (λ_ex > 330 nm) in degassed or air-saturated benzene proceeds rapidly to yield a major (2; N-[p-chlorobenzoyl]-5-methoxy-2-methyl-3-methylene-indoline) and a minor (3; N-[p-chlorobenzoyl]-5-methoxy-2, 3-dimethyl-indole) decarboxylated product and a minor indoline (5; 1-en-5-methoxy-2-methyl-3-methylene-in-doline), which is formed by loss of the p-chlorobenzoyl moiety. In air-saturated solvents two minor oxidized products 4 (N-[p-chlorobenzoyl]-5-methoxy-2-methylindol-3-aldehyde) and 6 (5-methoxy-2-methyl-indole-3-aldehyde) are also formed. When photolysis was carried out in ¹⁸O₂-saturated benzene, the oxidized products 4 and 6 contained ¹⁸O, indicating that oxidation was mediated by dissolved oxygen in the solvent. In more polar solvents such as acetonitrile or ethanol, photodecomposition is extremely slow and inefficient. Phosphorescence of IN at 77 K shows strong solvent dependence and its emission is greatly reduced as polarity of solvent is increased. Flash excitation of IN in degassed ethanol or acetonitrile produces no transients. A weak transient is observed at 375 nm in degassed benzene, which is not quenched by oxygen. Irradiation of IN (λ_ex > 325 nm) in N₂-gassed C₆H₆ in the presence of 5, 5-dimethyl-1-pyrroline-N-oxide (DMPO) results in the trapping of two carbon-centered radicals by DMPO. One adduct was identified as DMPO/^.COC₆H₄-p-CI, while the other was probably derived from a radical formed during IN decarboxylation. In air-saturated benzene, (hydro) peroxyl and alkoxyl radical adducts of DMPO are observed. A very weak luminescence signal from ¹O₂ at 1268 nm is observed initially upon irradiation (λ_ex= 325 nm) of IN in air-saturated benzene or chloroform. The intensity of this ¹O₂ signal increases as irradiation is continued suggesting that the enhancement in ¹O₂ yield is due to photoproduct(s). Accordingly, when 2 and 3 were tested directly, 2 was found to be a much better sensitizer of ¹O₂ than IN. In air-saturated ethanol or acetonitrile no IN ¹O₂ luminescence is detected even on continuous irradiation. The inability of IN to cause phototoxicity may be related to its photo stability in polar solvents, coupled with the low yield of active oxygen species (¹O₂, O₂^?_-) upon UV irradiation.