Optical pH Sensor Based On Chemical Modification of Polymer Film

A new low-cost pH sensor developed by immobilizing a direct indicator dye to porous and transparent acetylcellulose film. This sensor was fabricated by binding α-Naphthyl Red and Alizarine Yellow GG to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membranes have good durability (>12 months) and a short response time (<5 s). The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for the activity of the cellulose support are inexpensive, nontoxic, and widely available. The Alizarine Yellow GG sensor can be used for direct determination of pH in alkaline media without any alkaline error.     

A floating one centre perturbation treatment for H-like molecules

Closed form one centre partial wave perturbation results are obtained through second order in the energy for H-like molecules with arbitrary nuclear charges. The expansion centre for the method is taken at an arbitrary point along the internuclear axis and the zeroth-order wave function is a screened “1s” function centred at the expansion point. Various fixed one centre calculations of other workers for the lsσ states of H and HeH⁺⁺ and for the 2pσ state of HeH⁺⁺ are generated as limiting cases of this more general treatment. The floating one centre perturbation results for the 1sσ states of H₂⁺ and HeH⁺⁺ are used as models for discussing the usefulness of allowing the expansion centre in the one centre method to be a function of nuclear configuration.     

4,4-Acetalidine-bis-(3-methyl isoxazolone-5) as a new colorimetric reagent for the determination of palladium and uranium

Summary Palladium and uranium react with 4,4-acetalidine-bis-(3-methyl isoxazolone-5) in acid medium to give yellow color having a visual limit of identification at 2 and 15g per ml. This color reaction provides the basis of a new method for colorimetric determination of palladium and uranium. Copper also gives yellow color but it cannot be determined with this color reaction because the color intensity is not stable. The maximum tolerable limit of various ions is reported.

---

Zusammenfassung Pd und U reagieren in saurem Milieu mit 4,4-Acetalidin-bis-(3-methyl-isoxazolon-5) unter Gelbfärbung mit einer Erfassungsgrenze von 2 bzw. 15g/ml. Diese Farbreaktion dient als Grundlage für eine neue kolorimetrische Methode für Pd und U. Cu gibt zwar auch eine Gelbfärbung, kann aber damit nicht bestimmt werden, da die Farbintensität nicht beständig ist. Die maximal tolerierbare Menge der Fremdionen wird angegeben.

     

Pyridazine Derivatives and Related Compounds. Part 11: 1Synthesis of Some Pyrimido[4′,5′:4,5]thieno[2,3-c]pyridazines

3-Substituted pyrimido[4′,5′:4,5]thieno[2,3-c]pyridazine-2,4-di-ones and 3-amino-2-methylpyrimido[4′,5′:4,5]thieno[2,3-c]pyridazine-4-ones were synthesized starting from ethyl 5-aminothieno[2,3-c] pyridazine-6-carboxylate 1. Reaction of amino ester 1with phenyl isothiocyanate affords thiourea derivative 10which undergo further transformation to the related fused heterocyclic systems.     

Oxidation of Aryl Alkyl Ketones To α-Acyloxy, α-(Camphorsulfonyloxy), or α-Hydroxy Derivatives Using Manganese(III) Acetate in Combination with Carboxylic Acids or (1S)-(+)-10-Camphorsulfonic Acid

The α-oxidation of aryl alkyl ketones using manganese(III) acetate in the presence of various carboxylic acids and (1S)-(+)-10-camphorsulfonic acid provided a convenient synthesis of α-acyloxy, α-(10-camphorsulfonyloxy), and α-hydroxy derivatives in good yield.     

Apparent hydrodynamic thickness of densely grafted polymer layers in a theta solvent

We study the drainage of a near-theta solvent through densely grafted polymer layers and compare to recent notions that these layers display little permeability to solvent flow at surface separations less than a “hydrodynamic thickness.” The solvent is trans-decalin (a near-theta solvent at the experimental temperature of 24°C). The polymer is polystyrene (PS) end-attached to two opposed mica surfaces via the selective adsorption of the polyvinylpyridine (PVP) block of a PS-PVP diblock copolymer. The experimental probe was a surface forces apparatus modified to apply small-amplitude oscillatory displacements in the normal direction. Out-of-phase responses reflected viscous flow of solvent alone—the PS chains did not appear to contribute to dissipation over the oscillation frequencies studied. The value of the hydrodynamic thickness (R_H) was less than the coil thickness (L_o) measured independently from the onset of surface–surface interactions in the force-distance profile, implying significant penetration of the velocity field into the polymer layer. As the surface–surface separation was reduced from 3L_o to 0.3L_o, the apparent hydrodynamic thickness (R) decreased monotonically to values R ≪ R_H. Physically, this indicates that the “slip plane” moved progressively closer to the solid surfaces with decreasing surface–surface separation. This was accompanied by augmentation of the effective viscosity by a factor of up to approximately 5, indicating somewhat diminished permeability of solvent through the overlapping polymer layers. Similar results hold for the flow through surface-anchored polymers in a good solvent. It is interesting to note the strong stretching of densely end-grafted polymers in a theta solvent. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2961–2968, 1997     

Facile Catalyzed Preparation of 14‐Aryl‐ or Alkyl‐14‐H‐dibenzo[a,j]xanthenes by Dodecylphosphonic Acid and Dodecylsulfamic Acid: Environmentally Benign Methods

Under mild‐ and solvent‐free conditions, one‐pot preparation of 14‐alkyl‐ or 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes could proceed in the presence of catalytic amounts of dodecylphosphonic acid (DPA) and dodecylsulfamic acid (DSA) in good to excellent yields. In these reactions, DPA and DSA are recovered by straightforward work‐ups.     

A new strategy for simultaneous determination of cysteamine in the presence of high concentration of tryptophan using vinylferrocene-modified multiwall carbon nanotubes paste electrode

The electro-oxidation of cysteamine (CA) and tryptophan (TP) were studied by vinylferrocene-modified carbon nanotubes paste electrode using cyclic voltammetry, chronoamperometry, electrochemical impedance spectroscopy, and square wave voltammetry. This modified electrode exhibits persistent electron-mediating behavior followed by well-separated oxidation peaks towards CA and TP with decreasing their overpotentials. For the mixture containing CA and TP, the peaks potential well separated from each other. Using the modified electrode, the kinetics of CA electrooxidation was considerably enhanced by lowering the anodic overpotential through a catalytic fashion. Using square wave voltammetry, simultaneous determination of AC and TP has been explored at the modified electrode. Their square wave voltammetrics peaks current increased linearly with their concentration at the ranges of 0.09–500 and 5.0–1,000?μM, respectively with the detection limits of 0.05 and 1.0?μM, respectively. The modified electrode was successfully used for the determination of the analytes in real samples with satisfactory results.     

A Study on Transreactions of PET/PEN Reactive Blending in a Twin‐Screw Extruder Using an Axial Dispersion Model

Transreactions of PET and PEN melt‐mixed in a twin‐screw extruder are investigated. The extruder is modeled and characterized in the frame of a tubular system of closed type. The kinetic modeling is based on a modified second‐order reversible reaction equation, which allows the dispersion equation to be solved analytically. The analysis shows a good agreement between the model and experiment. The axial dispersion model is employed to predict the extent of transesterification reactions (X) and degree of randomness (RD). ¹H NMR measurements are performed to estimate X and RD. Theoretical and experimental data are in good agreement. The model can thus be exploited to describe the effects of processing parameters, mixing time, mixing temperature, and blend composition on X and RD.

     

Computational explorations to gain insight into the structural features of TNF-α receptor I inhibitors

TNF-α is a crucial cytokine in the process of inflammatory diseases. The adverse effect of TNF-α is mostly mediated by interaction of TNF-α with TNF-α receptor type I (TNFR1); therefore, discovery of molecules which can bind to TNFR1 preventing TNF-α-receptor complex formation would be of great interest. In the current study, using GRID/GOLPE program, a 3D-QSAR study was conducted on a series of synthetic TNFR1 binders, which resulted in a 3D-QSAR model with appropriate power of predictivity in internal (r²?=?0.94 and q²_LOO?=?0.74) and external (r²?=?0.66 and SDEP?=?0.42) validations. The structural features of TNFR1 inhibitors essential for exerting activity were explored by analyzing the contour maps of the 3D-QSAR model showing that steric interactions and hydrogen bonds are responsible for exerting TNFR1 inhibitory activity. To propose potential chemical entities for TNFR1 inhibition, PubChem database was searched and the selected compounds were virtually tested for anti-TNFR1 activity using the generated model, resulting in two potential anti-TNFR1 compounds. Finally, the possible interactions of the compounds with TNFR1 were investigated using docking studies. The findings in the current work can pave the way for designing more potent anti-TNFR1 inhibitors.