Kinetic-spectrophotometric determination of palladium in hydrogenation catalyst by its catalytic effect on the oxidation of pyrogallol red by hydrogen peroxide

A new kinetic-spectrophotometric method is described for the determination of ultra trace amounts of Pd(II). The methods based on catalytic action of Pd(II) on the oxidation of pyrogallol red (PGR) with hydrogen peroxide at pH 9.7. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the PGR at 540 nm, for the first 4.5 min from initiation of the reaction. Calibration curve was linear in the range of 0.02-1.00 microg ml(-1) Pd(II). The limit of detection is 0.017 microg ml(-1) Pd(II). The relative standard deviation (R.S.D.) for ten replicate analyses of 0.03 and 0.60 microg ml(-1) Pd(II) was 1.5 and 0.9%, respectively. The influence of more than 40 potential interfering ions was studied for the selectivity. The proposed method was used for the determination of palladium in catalytic material.     

From a biogenetic scenario to a synthesis of the ABC ring of manzamine A

On the basis of a biogenetic proposal for explaining the biogenesis of manzamine A, the cycloaddition of dihydropyridinium salt 26 with diene derivative 5 leads to adducts 27. These adducts, as well as their related and previously described analogues 9, are now shown to be precursors of diene derivatives such as 10, 13, and 28. Treatment of diene 32 with sodium azide resulted in a one-step formation of the tricyclic imino derivative 34. This key intermediate was further transformed into tricyclic derivative 40, which possesses the essential features of the ABC ring of manzamine A.     

Flow injection chemiluminescence determination of hydrazine by oxidation with chlorinated isocyanurates

A rapid and sensitive flow injection chemiluminescence (CL) method is described for the determination of hydrazine based on the CL generated during its reaction with either sodium dichloroisocyanurate (SDCC) or trichloroisocyanuric acid (TCCA) in alkaline medium. The emission intensity is greatly enhanced if dichlorofluorescein (DCF) as sensitizer is present in the reaction medium. The presence of citrate prevents the precipitation of some cations in the reaction medium and also causes an enhancement in emission intensity. The effect of analytical and flow injection variables on these CL systems and determination of hydrazine are discussed. The optimum parameters for the determination of hydrazine were studied and were found to be the following: SDCC and TCCA both 1x10(-3) M; NaOH, 2x10(-1) M; DCF, 5x10(-6) M; citrate, 1x10(-3) M and flow rate, 3.8 ml min(-1). The optimized method yielded 3sigma detection limits of 2x10(-7) and 3x10(-7) M for hydrazine with SDCC and TCCA oxidants, respectively. The method is simple, fast, sensitive, and precise and was applied to the determination of hydrazine in water samples.     

Synthesis, Characterization, and Biological Activity of n-Tributyltin Derivatives of Pharmaceutically Active Carboxylates

Summary.  Tributyltin(IV) derivatives of six different pharmaceutically active carboxylates were synthesized. The complexes were characterized by different analytical techniques (elemental analysis; infrared, NMR, and mass spectroscopy). ¹¹⁹Sn NMR data were also recorded in six different coordinating and non-coordinating solvents. The antibacterial activities of the compounds were tested using ten different bacteria relative to the reference drugs ampicillin and cephalexin. Received September 20, 2001. Accepted (revised) December 6, 2001     

Simultaneous determination of ofloxacin,tetrahydrozoline hydrochloride,and prednisolone acetate by high-performance liquid chromatography

A simple, specific, and precise high-performance liquid chromatographic method has been developed for the simultaneous determination of ofloxacin (OFX), tetrahydrozoline hydrochloride (THC), and prednisolone acetate (PAC) in ophthalmic suspension using propylparaben (POP) as the internal standard. The mobile phase consists of 0.05 M phosphate buffer-acetonitrile (65:35, v/v), and the pH is adjusted to 2.7 with orthophosphoric acid. A column containing octadecyl silane chemically bonded to porous silica particles (Waters Spherisorb, 5 microm ODS 1, 4.6 x 150 mm) is used as the stationary phase. The detection is carried out using a variable wavelength UV-vis detector set at 210 nm for OFX and THC and 254 nm for POP (internal standard) and PAC. The solutions are chromatographed at a constant flow rate of 1.2 mL/min. Retention times for OFX, THC, POP, and PAC are approximately 2.5, 4.5, 7.8, and 9.5 min, respectively. The relative retention times are approximately 0.14 min for OFX, 0.35 min for THC, 1.00 min for POP, and 1.22 min for PAC. The linearity range and percent recoveries for OFX, THC, and PAC are 24-120, 4-16, and 16-80 microg/mL and 100.48%, 100.34%, and 100.21%, respectively.     

Synthesis and characterization of platinum(II) and (IV) complexes containing hexamethyleneimine ligand: crystal structure of [Pt(hexamethyleneimine)2(cyclobutanedicarboxylato)]·H2O

A series of new platinum(II) and platinum(IV) complexes of the type [Pt^II(HMI)₂X] (where HMI=hexamethyleneimine, X=dichloro, sulfato, 1,1-cyclobutanedicarboxylato [CBDCA], oxalato, methylmalonato, or tatronato) and [Pt^IV(HMI)₂Y₂Cl₂] (where Y=hydroxo, acetato, or chloro) were synthesized and characterized by infrared (IR) spectroscopy, ¹³C and ¹⁹⁵Pt nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. Among the complexes synthesized, [Pt^II(hexamethyleneimine)₂(1,1-cyclobutanedicarboxylato)]·H₂O was examined by single-crystal X-ray diffraction. The slightly distorted square planar coordination environment of the platinum metal includes the amino group of the hexamethyleneimine (HMI) molecule and the oxygen atoms of the carboxylato ligand. The cyclobutanedicarboxylic acid (CBDCA) molecule adopts six-member chelating rings with platinum. Hydrogen bonding plays an important part in holding the crystal lattice together.     

Synthesis, characterization, and electrochemical and electrochromic properties of sandwich dilutetium tetraphthalocyanine

A new sandwich-tpype dilutetium tetraphthalocyanine 4 has been synthesized by the reaction of dimeric lutetium(III) phthalocyanine 3 with two equiv. of dilithium octakishexylthiophthalocyanine in amyl alcohol. Compound 3 was prepared from 4',5',4",5"-tetraiminoisoindoline(1,4,7,10-tetrathia-12-crown-4) 1, 4,5-bis(hexylthio)-1,2-diiminoisoindoline and lutetium acetate in amyl alcohol. Compounds 3 and 4 were characterized by elemental analysis, UV/visible, IR, (1)H NMR and ESR spectroscopy. The electrochemical and electrochromic properties of 3 and 4 have been examined by cyclic voltammetry. Both 3 and 4 displayed well-defined electrochromic behavior.     

Microemulsion-based synthesis of CeO(2) powders with high surface area and high-temperature stabilities

Pure ceria powders, CeO(2), were synthesized in heptane-microemulsified aqueous solutions of CeCl(3) or Ce(NO(3))(3) stabilized by AOT (sodium bis(2-ethylhexyl) sulfosuccinate), DDAB (di-n-didodecyldimethylammonium bromide), or DDAB + Brij 35 surfactant mixtures. Micellar DTAB (n-dodecyltrimethylammonium bromide) and vesicular DDAB systems were also used as media for generating CeO(2). Characterization of the powders by X-ray powder diffractometry, laser-Raman spectroscopy, and Fourier transform infrared spectroscopy revealed that in the presence of surfactants almost-agglomerate-free nanosized crystallites (6-13 nm) of anionic vacancy-free cubic CeO(2) were produced. In the absence of surfactants 21-nm-sized crystallites were formed, comparing with the 85-nm-sized crystallites when cubic CeO(2) was created via thermal decomposition of cerium oxalate. Surface characterization, by X-ray photoelectron spectroscopy, N(2) sorptiometry, and high-resolution electron microscopy showed AOT- or (DDAB + Brij 35)-stabilized microemulsions to assist in formation of crystallites exposing surfaces of large specific areas (up to ca. 250 m(2)/g) but of low stability to high-temperature calcination (28-13 m(2)/g at 800 degrees C). In contrast, the double-chained DDAB was found to generate cubic CeO(2) crystallites of lower initial surface areas (144 (microemulsion) to 125 (vesicles) m(2)/g)) but of higher thermal stability (55-45 m(2)/g at 800 degrees C). Hence, the latter cerias could be considered as appropriate components for total oxidation (combustion) catalysts.     

Molecular structure of an alkyl-side-chain polymer-water interface: origins of contact angle hysteresis

A new and direct approach to verify surface heterogeneity as the microscopic origin of contact-angle hysteresis is demonstrated. IR-visible sum-frequency-generation spectroscopy (SFG) was used to selectively probe the molecules at the interface of an alkyl-side-chain polymer [poly(vinyl n-octadecyl carbamate-co-vinyl acetate)] with water. The spectra indicate that in contact with water, the polymer surface is heterogeneous (having areas of differing surface energies). This evidence of surface heterogeneity supports the hysteresis observed in the advancing and receding contact angles of the polymer surface with water. The same measurements made for the chemically and structurally similar surface of an octadecyltrichlorosilane self-assembled monolayer indicates a homogeneous surface at the water interface. In this case, contact-angle hysteresis measurements implicate surface roughness as the cause of hysteresis. Atomic force microscopy measurements of roughness for these surfaces further support our conclusions. The polymer-water interface was probed using SFG at above-ambient temperatures, and an order-to-disorder transition (ODT) of alkyl side chains at the interface was observed, which closely follows the melting of crystalline side chains in the bulk. This transition explains the increased wettability of the polymer, by water, when the temperature is raised above the bulk melting temperature. Furthermore, the irreversibility of this ODT suggests that the disordered polymer-water interface is the thermodynamic equilibrium state, whereas the before-heating structure of this interface is a kinetically hindered metastable state.     

Dynamics of polymer packaging

We use the stochastic rotation dynamics algorithm to investigate the packaging of flexible and semiflexible polymers into a capsid that is permeable to solvent molecules. The model takes into account hydrodynamic interactions arising due to local flow. The flexible chain maintains a random configuration as it is being fed into the capsid, in contrast to the semiflexible chain, whose configuration is initially spool-like, becoming more random at high packing. We measure the packing rate, which is found to decrease with the percentage of the chain packed and highlight the difference between the flexible and semiflexible chains. Reflecting experiments, we find pauses in the packing process for individual chains as the motor loses grip of the fluctuating beads. We also find that hydrodynamics is important, in that the packaging rate is faster when flow is included.