The effect of oxidation on physical properties of porous silicon layers for optical applications

In order to understand the optical loss mechanisms in porous silicon based waveguides, structural and optical studies have been performed. Scanning and transmission electron microscopic observations of porous silicon layers are obtained before and after an oxidation process at high temperature in wet O₂. Pore size and shape of heavily p-type doped Si wafers are estimated and correlated to the optical properties of the material before and after oxidation. The refractive index was measured and compared to that determined by the Bruggeman model.     

Aggregation effects in maximum covering models

The level of aggregation is critical in discrete location analyses as it affects the level of data collection required, computation times and the usefulness of the analyses. We examine the effects of three alternative nodal aggregation schemes on (i) the model's solution times, (ii) the locational decisions indicated by the maximum covering model, (iii) the coverage provided by the aggregate solutions compared with the optimal solutions, and (iv) the coverage predicted by the aggregate model compared with the coverage that results from using the aggregate model's facility sites and the disaggregate demands. The results suggest that considerable aggregation can be tolerated without incurring large errors in total coverage, but that location errors are introduced at moderate levels of aggregation. The magnitude of these errors is significantly affected by the aggregation scheme employed.     

Observation and analysis ofE mesons in\bar p p annihilation at rest in H2 gas

Antiproton-proton annihilation at rest in a gaseous H₂ target at NTP into the final state π⁺ π^? K ^± π^? (K ⁰) with an undetectedK ⁰ or \(\bar K^0 \) has been investigated. We observe theE(1420) resonance in the invariant mass spectrum (K ⁰)_miss K ^± π^? with massM _E =1413±8 MeV/c² and widthГ ^E =62 ± 16MeV/c² and find evidence for the production of thef ₁(1285). The absolute branching ratio of \(\bar p\) p → π⁺ π^? E ⁰,E ⁰ →K ₀ ^L K ^± π ^? at (61±6)%P wave annihilation is (3.0±0.9)·10^?4 of all annihilations. The observed suppression of theE production fromP wave with respect to theS wave together with some simple selection rules suggest that the quantum numbers of theE(1420) areJ ^pc=0^?+ and not I⁺⁺.     

Synthesen von Heterocyclen, 122. Mitt.: Über die Reaktion des Perimidons mit aktiven Malonestern

Zusammenfassung Perimidon (1) reagiert mit monosubstit. Malonsäure-trichlorphenylestern (2) bei 250° zu 9-Hydroxy-5,7-dioxo-4,5-dihydro-7H-pyrido[1,2,3-cd]perimidinen (3), die durch saure Hydrolyse zu 10-Amino-4-hydroxy-benzo[h]carbostyrilen (4) gespalten werden.

---

Syntheses of heterocycles, CXXII: Reaction of perimidone with reactive malonates

Perimidone (1) reacts with monosubstituted 2.4.6-trichlorophenyl malonates at 250° to 9-hydroxy-5.7-dioxo-4.5-dihydro-7H-pyrido[1.2.3-cd]perimidines (3), which are cleaved by acid yielding 10-amino-4-hydroxy-benzo[h]quinolin-2-ones (4).

     

BIOLOGICAL ACTIVITIES OF PHTHALOCYANINES-X. SYNTHESES AND ANALYSES OF SULFONATED PHTHALOCYANINES

Abstract— Synthetic methods to obtain selectively sulfonated metallo phthalocyanines are compared. Both condensation and direct sulfonation procedures lead to mixtures of mono- to tetrasulfonated products which are resolved by reverse phase liquid chromatography in buffered aqueous-methanol. The proportion of sulfonated derivatives is examined as a function of the starting reagents in the case of the condensation method, and as a function of the temperature and reaction time in the case of the direct sulfonation procedure. The number of sulfonate groups per phthalocyanine molecule is determined by oxidative degradation of the phthalocyanine ring followed by quantitative chromatographic analysis of the sulfophthalamide and phthalamide fragments.     

Trace element concentration in head hair of the inhabitans of the Rawalpindi-Islamabad area

Instrumental neutron activation analysis technique has been used to determine the concentration levels of 12 trace elements in human head hair samples collected from 105 individuals living in various areas of Rawalpindi-Islamabad. The data show that the average concentrations of Mn, Co, Ag and Au are higher in the female group as compared to the male group. Four individuals were found to have elevated levels of Se due to the use of anti-dandruff shampoos, whereas two individials had elevated levels of Hg.     

Iodination of alcohols using triphenylphosphine/iodine under solvent-free conditions using microwave irradiation

A straightforward and effective procedure for the conversion of benzylic, allylic and aliphatic alcohols to the corresponding iodides using Ph₃P/I₂ under solvent-free conditions using microwave irradiation is reported.     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.