Comprehensive study of the methyl effect on the solvolysis rates of bridgehead derivatives

The effect of a bridgehead methyl group on the hydride ion affinity in the gas phase of bicyclo[1.1.1]pent-1-yl (1+), 1-norbornyl (3+), cubyl (5+), 1-adamantyl (7+), bicyclo[2.2.2]oct-1-yl (9+),and bicyclo[3.1.1]hept-1-yl (11+) cations has been studied using density functional theory and ab initio methods. It is concluded that the methyl group always increases the stability of the substituted cations. The effect of the solvent on the stability of methyl-substituted cations in relation to the unsubstituted cations has been studied using the polarizable continuum model of the self-consistent reaction field theory. In the case of rearranging cations, the nucleophilic assistance of the solvent is determined by means of the interaction energy of the corresponding water complexes. It is concluded that the solvent causes the relative stabilization of the parent cations. As a consequence, most of the methyl-substituted bridgehead derivatives show a lower solvolysis rate than the corresponding unsubstituted compounds. A nonqualitative explanation of the methyl effect on the relative stability of bridgehead cations in both gas phase and solution is given for the first time. The ratios of solvolysis products in the case of rearranging bridgehead cations have also been computed from the relative stability of the intermediate water complexes.     

In-line pressurized-fluid extraction-solid-phase extraction for determining phenolic compounds in grapes

A procedure to determine 3-alkyl-2-methoxypyrazines in wines is described. It is based on the headspace solid-phase microextraction (HS-SPME) technique after a clean-up of the sample by distillation (previously acidified to pH 0.5) to remove ethanol and other volatile compounds that can interfere in the SPME. Determination is performed by means of capillary gas chromatography using a nitrogen-phosphorus detector. The method allows quantification of 3-isobutyl-2-methoxypyrazine, 3-sec-butyl-2-methoxypyrazine and 3-isopropyl-2-methoxypyrazine at their natural concentration levels and below their sensory thresholds in Cabernet Sauvignon and Merlot wines. The method was successfully applied to experimental red wines and the evolution of their pyrazine contents during the winemaking process was monitored. Pyrazine content increased during the first maceration day but did not change significantly during alcoholic and malolactic fermentation. Final contents in wines were 12-27 ng/l of 3-isobutyl-2-methoxypyrazine and 5-10 ng/l of 3-sec-butyl-2-methoxypyrazine.     

Hybridization and enzymatic extension of au nanoparticle-bound oligonucleotides

We have investigated the impact of steric effects on the hybridization and enzymatic extension of oligonucleotides bound to 12-nm colloidal Au particles. In these experiments, a nanoparticle-bound 12-mer sequence is hybridized either to its solution phase 12-mer complement or to an 88-mer template sequence. The particle-bound oligonucleotide serves as a primer for enzymatic extension reactions, in which covalent incorporation of nucleotides to form the complement of the template is achieved by the action of DNA polymerase. Primers were attached via-C(6)H(12)SH, -C(12)H(24)SH, and -TTACAATC(6)H(12)SH linkers attached at the 5' end. Primer coverage on the nanoparticles was varied by dilution with (5')HSC(6)H(12)AAA AAA(3'). Hybridization efficiencies were determined as a function of linker length, primer coverage, complement length (12-mer vs 88-mer), and primer:complement concentration ratio. In all cases, hybridization for the 88-mer was less efficient than for the 12-mer. Low primer surface coverage, greater particle-primer separation, and higher primer:complement ratios led to optimal hybridization. Hybridization efficiencies as high as 98% and 75% were observed for the 12-mer and 88-mer, respectively. Enzymatic extension of particle-bound primers was observed under all conditions tested; however, the efficiency of the reaction was strongly affected by linker length and primer coverage. Extension of primers attached by the longest linker was as efficient as the solution-phase reaction.     

Synthesis of alpha-galactosyl ceramide,a potent immunostimulatory agent

Alpha-galactosyl ceramide has been identified to be a potent stimulatory agent for a novel immunological process, mediated by CD1 molecules. This paper describes a short and efficient synthesis of alpha-galactosyl ceramide. Starting from commercially available 2-deoxy galactose, a suitable sphingosine derivative was obtained in nine steps and 36% overall yield, which was subsequently glycosylated to give the target molecule. This flexible route will provide various glycolipids for further exploration of this interesting biological process.     

Identification of anhydroecgonine methyl ester N-oxide,a new metabolite of anhydroecgonine methyl ester,using electrospray mass spectrometry

Cocaine is transformed into hepatotoxic metabolites through oxidative pathways. For anhydroecgonine methyl ester (AEME), the main constituent in crack smoke, the oxidative metabolism has not been studied. Therefore, incubation of AEME with rat liver microsomes was performed and a metabolite of AEME, anhydroecgonine methyl ester N-oxide (AEMENO), was identified. The chemical structure of this new metabolite was confirmed by synthesis and by comparative interpretation of electrospray multiple-stage mass spectra, which were obtained in the positive ion mode. This metabolite was also detected in whole blood, serum and urine samples from crack users. The application of liquid chromatography/electrospray mass spectrometry or nanoelectrospray mass spectrometry was necessary because AEMENO is susceptible to thermal degradation during gas chromatographic/mass spectrometric analysis. This study demonstrated that AEMENO is produced by rat hepatic microsomal metabolism in vitro and is present in body fluids from crack users.     

Enantioselective total syntheses of manzamine a and related alkaloids

As a prelude to undertaking the total syntheses of the complex manzamine alkaloids, a series of model studies were conducted to establish the scope and limitations of intramolecular [4 + 2] cycloadditions of N-acylated vinylogous ureas with the trienic substrates 17a,b, 28a,b, and 34. These experiments clearly demonstrated that the geometry of the internal double bond and the presence of an electron-withdrawing group on the diene moiety were essential for the facile and stereoselective formation of the desired cycloadducts. The enantioselective syntheses of the manzamine alkaloids ircinol A (75), ircinal A (5), and manzamine A (1) were then completed by employing a convergent strategy that featured a novel domino Stille/Diels-Alder reaction to construct the tricyclic ABC ring core embodied in these alkaloids. Thus, the readily accessible chiral dihydropyrrole 58 was first converted in a single chemical operation into the key tricyclic intermediate 60. Two ring-closing metathesis reactions were then used to form the 13- and 8-membered rings leading to Z-72 and 74, the latter of which was quickly elaborated into ircinal A (5) via ircinol A (75). The synthetic 5 thus obtained was converted into manzamine A (1) following literature precedent. This concise synthesis of ircinal A required a total of 24 operations from commercially available starting materials with the longest linear sequence being 21 steps.     

One-pot enantioselective formation of eight-membered rings from alkenyl Fischer carbene complexes and ketone enolates

Eight-membered carbocycles with up to five new stereogenic centers are enantioselectively obtained following a one-pot procedure that involves the coupling of three components: an alkenyl Fischer carbene complex, a ketone enolate, and allyl lithium.     

Kinetic-spectrophotometric determination of palladium in hydrogenation catalyst by its catalytic effect on the oxidation of pyrogallol red by hydrogen peroxide

A new kinetic-spectrophotometric method is described for the determination of ultra trace amounts of Pd(II). The methods based on catalytic action of Pd(II) on the oxidation of pyrogallol red (PGR) with hydrogen peroxide at pH 9.7. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of the PGR at 540 nm, for the first 4.5 min from initiation of the reaction. Calibration curve was linear in the range of 0.02-1.00 microg ml(-1) Pd(II). The limit of detection is 0.017 microg ml(-1) Pd(II). The relative standard deviation (R.S.D.) for ten replicate analyses of 0.03 and 0.60 microg ml(-1) Pd(II) was 1.5 and 0.9%, respectively. The influence of more than 40 potential interfering ions was studied for the selectivity. The proposed method was used for the determination of palladium in catalytic material.     

Alloy formation in mechanically activated mixtures

The physical mixtures of hydroxocarbonates of Cu and Ni with aluminium were activated using a laboratory planetary mill. The chemical reactions and alloy formations as the effects of grinding were followed by the phase analysis of solid products based on the thermogravimetry and X-ray diffractometry. Experimental evidence indicates that the nature of reactions and products of mechanical activation was dependent on the amount of aluminium and time of grinding. This revised version was published online in July 2006 with corrections to the Cover Date.     

thermal stability of epoxy systems badge (n=0)/1,2-dch and badge (n=0)/ 1,2-dch/vinylcyclohexene dioxide

The thermal degradation of the epoxy system diglycidyl ether of bisphenol A (BADGE n=0)/1,2-diamine cyclohexane (DCH) containing different concentrations of an epoxy reactive diluent was studied by thermogravimetric analysis in order to determine the reaction mechanism of the degradation process and to compare it with the results for the same system without diluent. The value of the activation energy, necessary for this study, was calculated using various integral and differential methods. Values obtained using the different methods were compared to the value obtained by the Flynn-Wall-Ozawa"s method (between 193-240 kJ mol^-1 depending on the diluent concentration) with does not require a knowledge of the nth order reaction mechanism. All the experimental results were compared to master curves in the range of Doyle"s approximation (20-35% of conversion). Analysis of the results suggests that the reaction mechanism could be F₂, F₃, or A₂ type. This revised version was published online in July 2006 with corrections to the Cover Date.