Determination of essential and toxic elements in Libyan foodstuff using instrumental neutron activation analysis (INAA)

Since there is no database in Libya defining the intake of the individuals from different essential (minor and trace) and toxic elements provided through food, drinking water and aerosol, a project has been proposed with the cooperation of IAEA to determine the concentration of a number of elements such as Cs, Fe, Cr, Rb, Sc, Se, Co, Zn in the three mentioned sources. Emphasis was placed on the use of nuclear and nuclear-related techniques. In this paper, the primary results are presented for the concentration of minor and trace elements in some vegetables, spices and other foods which are widely used in the Libyan meals. Instrumental neutron activation analysis utilizing a 10 MW water pool reactor and a γ-ray spectroscopy facility was employed. For quality control, certified reference materials were analyzed simultaneosly with the samples which show good agreements compared with the certified data. Emphasis was given to both elements iron and zinc for their importance.     

Use of liquid chromatography for separation and determination of carrier species associated with the synthesis of no carrier-added11C-labelled compounds determination of the specific activity of {11C} urea

An analytical technique using reversed-phase liquid chromatography has been developed for the determination of urea at quantities as low as 1 ng to quantitate the amount of non-labelled urea produced during the synthesis of no-carrier-added {¹¹C}urea starting from¹¹CN^–. As a result, the specific activity of the {¹¹C} urea thus prepared was calculated to be as high as 3.5±0.8 Ci/mol.Research supported in part by PHS Grant NINCDS 1 PO1 NS 15639.     

Theoretical study of structure,vibrational and electronic spectra of isomers of methyl-3-methoxy-2-propenoate

A systematic quantum mechanical study of the possible conformations, their relative stabilities, vibrational and electronic spectra and thermodynamic parameters of methyl-3-methoxy-2-propenoate has been reported for the electronic ground (S₀) and first excited (S₁) states using time-dependent and time-independent Density Functional Theory (DFT) and RHF methods in extended basis sets. Detailed studies have been restricted to the E-isomer, which is found to be substantially more stable than the Z-isomer. Four possible conformers c′Cc, c′Tc, t′Cc, t′Tc, of which the first two are most stable, have been identified in the S₀ and S₁ states. Electronic excitation to S₁ state is accompanied with a reversal in the relative stability of the c′Cc and c′Tc conformers and a substantial reduction in the rotational barrier between them, as compared with the S₀ state. Optimized geometries of these conformers in the S₀ and S₁ states are being reported. Based on suitably scaled RHF/6-31G^** and DFT/6-311G^** calculations, assignments have been provided to the fundamental vibrational bands of both these conformers in terms of frequency, form and intensity of vibrations and potential energy distribution across the symmetry coordinates in the S₀ state. A complete interpretation of the electronic spectra of the conformers has been provided.     

Synthesis and characterization of PVP/AAc copolymer hydrogel and its applications in the removal of heavy metals from aqueous solution

Chelating poly(vinylpyrrolidone/acrylic acid) (PVP/AAc) copolymer hydrogels were prepared by radiation-induced copolymerization. The effects of preparation parameters such as PVP content in the hydrogel and irradiation dose on the swelling behavior of the hydrogel were studied. The pH dependent swelling was investigated. The thermal stability of the prepared hydrogel and the metal chelated ones was characterized by TGA. The removal of Fe(III), Cu(II), and Mn(II) from aqueous solution by the prepared PVP/AAc chelating hydrogel was examined by batch equilibration technique. The influence of treatment time, pH, and the initial feed concentration on the amount of the metal ions removed was studied. The results show that the removal of the metal ion followed the following order: Fe(III) > Cu(II) > Mn(II). The amounts of the removed metal ions increased with treatment time and pH of the medium. To re-use the hydrogel, the metal ions were stripped by using 2 N HCl.     

New and novel organic-inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode

A new phase of ‘organic-inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg²⁺-Zn²⁺, Hg²⁺-Ni²⁺, Hg²⁺-Cu²⁺, Hg²⁺-Fe³⁺, Hg²⁺-Cd²⁺, Hg²⁺-Mg²⁺ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.     

Dry deposition of elemental iodine on skin,hair, and clothing from air

Hairless rats, clothes, human hair, filter paper and water were exposed to gaseous elemental iodine in a glass chamber for 60–120 minutes. The deposition of gaseous elemental iodine on skin and lung of rats, human hair, water, clothes and paper were investigated by measuring iodine content in the exposed material by epithermal neutron activation analysis (ENAA). For measurement of the iodine concentration in the chamber air, elemental iodine in the air was collected by continuously sucking air through an active charcoal column. The trapped iodine in the active charcoal was then determined by ENAA. The measured deposition velocity in the test chamber of gaseous elemental iodine on skin, clothing, hair and water ranges from 0.006 on filter paper and water to about 0.05 cm/s on skin and clothes. The variation of elemental iodine concentration in air of the glass chamber was investigated by collecting and analyzing air samples at various time intervals. The results show that the variation with time in the concentration of the iodine can be described by an exponential function.     

TLC resolution of enantiomeric mixtures of amino acids

Summary Resolution of enantiomeric mixtures of DL-amino acids (Nine) using silica gel layers impregnated with (-)-bruncine is reported. The solvent system used was Butanol: Acetic acid: Chloroform (3∶1∶4). The diastereomers were formed and hydrolysed, by dilute HCl spray, on the chromatogram only and the amino acids thus resolved were located by ninhydrin spray. The cross resolution possibilities of enantiomers were also calculated.     

Raman spectroscopic study of the hydration of short-chain poly(oxyethylene)s C <Subscript>1</Subscript>E<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>C <Subscript>1</Subscript> (<Emphasis Type="Italic">n</Emphasis>=1−4)

The hypothesis that the degree of hydration of poly(oxyethylene) (POE) in aqueous solution depends on the mole ratio of water molecules to ether oxygen atoms in the molecule has been verified by studying the isotropic Raman spectra in the O−H stretching region for four short-chain POEs (C ₁E _n C ₁ withn=1−4). Excellent coincidence of the O−H stretching Raman band for all four POEs studied in the range of mole ratio H₂O/O _ether from 25 to 0.6 was observed, thus confirming the assumption stated above. A conclusion that all ether oxygen atoms in the POE molecule participate in hydrogen bonding with water molecules has been made.     

Kinetic and thermodynamic acidities of substituted 1-benzyl-1-methoxy-2-nitroethylenes. Strong reduction of the transition state imbalance compared to other nitroalkanes

Acidity constants of six substituted 1-benzyl-1-methoxy-2-nitroethylenes (2-Z with Z = m-NO(2), m-CF(3), m-Cl, H, p-Me, p-MeO) and their respective nitronic acids were determined in 50% DMSO-50% water (v/v) at 20 degrees C. Kinetic data were obtained on the reversible deprotonation of all six 2-Z by OH(-) and piperidine and on the reversible deprotonation of 2-NO(2)() by piperazine, 1-(2-hydroxyethyl)piperazine, and morpholine in the same solvent. These data allowed a determination of the Br?nsted coefficients alpha (dependence on acidity of 2-Z) and beta (dependence on amine basicity). The fact that alpha > beta indicates the presence of a transition state imbalance which, however, is much smaller than that for the deprotonation of arylnitromethanes. The reasons for this reduction in the imbalance and their relevance to a recent study of the deprotonation of Fischer carbene complexes are discussed.     

Electrochemical technique for the determination of fractal dimension of dental surfaces

Fractal dimension of a carious tooth surface was determined using an electrochemical method. The method was based on time-dependent diffusion towards electrode surfaces, which is one of the most useful and reliable methods for the determination of fractal dimension of electrode surfaces. For this purpose, the tooth was covered with a gold layer, which acted as an electrode in electrochemical experiments. It is suggested that the fractal dimension can be used as a quantitative measure of the state of dental surfaces. The method presented demonstrates the power of electrochemical techniques for the determination of fractal dimension of surface of non-conducting objects.