Quantification of bromine in flame-retardant coatings by radiofrequency glow discharge–optical emission spectrometry

There is an increasing concern regarding the toxicity and environmental distribution and impact of brominated organic compounds employed as flame retardants. Thus, present interest in searching for new analytical techniques and methods allowing a rapid, simple and reliable detection of those compounds in materials and wastes potentially containing such flame retardants is not surprising. The feasibility of using radiofrequency glow discharge plasma spectrometry coupled with optical emission spectrometry (rf-GD-OES) as a rapid and simple tool to directly analyse bromine-containing flame-retardant polymeric layers is investigated here. Polymeric layers for calibration were made by mixing appropriate amounts of tetrabromobisphenol A, bisphenol A, phloroglucinol and diphenylmethane-4,4′-diisocyanate in tetrahydrofuran. The corresponding blanks (polymers without tetrabromobisphenol A) were also prepared. Detection of bromine was investigated both in the visible (at 470.48 nm) and in the near-infrared (at 827.24 nm) regions, using a charge-coupled device for detection. Discharge parameters affecting the emission intensity of bromine were first optimized (in argon and helium as possible plasma gases) and the analytical performance characteristics were then evaluated. The best detection limit (0.044% Br) was achieved measuring Br I 827.24 nm in a He discharge, using a forward power of 70 W and a pressure of 45 Torr. The linearity range extended up to 27% Br. Finally, the applicability of the rf-GD-OES method proposed to the quantitative analysis of bromine in solid materials coated with flame-retardant commercial paints was successfully demonstrated. Figure Flame Retardants     

Organocatalytic asymmetric Mannich reactions with N-Boc and N-Cbz protected alpha-amido sulfones (Boc: tert-butoxycarbonyl, Cbz: benzyloxycarbonyl)

Different malonates and beta-ketoesters can react with N-tert-butoxycarbonyl- (N-Boc) and N-benzyloxycarbonyl- (N-Cbz) protected alpha-amido sulfones in an organocatalytic asymmetric Mannich-type reaction. The reaction makes use of a simple and easily obtained phase-transfer catalyst and proceeds under very mild and user-friendly conditions. The optimised protocol avoids the preparation and the isolation of the relatively unstable N-Boc and N-Cbz imines that are generated in situ from the bench-stable alpha-amido sulfones. The corresponding Mannich bases are generally obtained in good yields and enantioselectivities, and can be readily transformed into key compounds, such as optically active beta3-amino acids in one easy step. Enantioenriched N-Boc and N-Cbz protected beta-amino acids that are suitable for peptide synthesis are also available from the Mannich adducts through simple manipulations. Control experiments showed the dual role of the enolate-catalyst ion pair in this reaction, as well as the crucial role of the presence of water to achieve high enantioselectivities.     

Preparation, characterization, and Zn(2+) adsorption behavior of chemically modified MCM-41 with 5-mercapto-1-methyltetrazole

A mesoporous silica (MCM-41) has been chemically modified with 5-mercapto-1-methyltetrazole using the homogeneous route. This synthetic route involved the reaction of 5-mercapto-1-methyltetrazole with 3-chloropropyltriethoxysilane prior to immobilization on the support. The resulting material (MTTZ-MCM-41) has been characterized by powder X-ray diffraction, nitrogen gas sorption, FT-IR and MAS NMR spectroscopy, thermogravimetry, and elemental analysis. The solid was employed as a Zn(II) adsorbent from aqueous solutions at room temperature. The effect of several variables (stirring time, pH, metal concentration, addition of ethanol, presence of other metals in the medium) has been studied using batch and column techniques. Flame atomic absorption spectrometry was used to determine the Zn(II) concentration in the filtrate or in the eluted solution after the adsorption process. Results obtained indicate that under the optimum conditions (pH 8 and 2 h stirring time), the maximum adsorption value for Zn(II) was 1.59+/-0.01 mmol/g, whereas the adsorption capacity of the unmodified mesoporous silica was about 0.010+/-0.001 mmol/g. On the other hand, the Zn(II) adsorption on the MTTZ-MCM-41 was independent of the presence of ethanol and other metals (Cu(II), Mn(II), Ca(II), and Mg(II)) in the medium. Finally, experiments carried out in order to study the regeneration capacity of the MTTZ-MCM-41 revealed that the adsorption capacity of this material was maintained after 3 cycles of the adsorption/desorption process.     

Synthesis and coating of cobalt ferrite nanoparticles: a first step toward the obtainment of new magnetic nanocarriers

Monodisperse and stable cobalt ferrite (CoFe2O4) nanoparticles (5.4 nm) have been produced, coated with mono- and difunctional phosphonic and hydroxamic acids, and fully characterized (using thermogravimetric analysis (TGA), dynamic light scattering (DLS), IR spectroscopy, transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) measurements). Cobalt leakage of the coated nanoparticles has been also studied. Magnetic measurements show the possible applications in hyperthermia at low frequencies, and for this reason, water-soluble coated CoFe2O4 can be seen as a first step toward the obtainment of novel systems for biomagnetic applications.     

A robotics-potentiometric method for the determination of mercaptan sulfur in fuels

A fully automated robotics method for the determination of mercaptan sulfur in several types of fuels is proposed. It is based on the standard method involving removal of sulfide with cadmium sulfate and subsequent determination. The robotics station develops both the preliminary operations and the determination. The method affords a precision, expressed as relative standard deviation, of 1.63%. The good agreement between the results obtained by the proposed and by conventional methods for the target analyte confirms its excellent performance and usefulness. Received: 1 July 1998 / Revised: 9 September 1998 / Accepted: 13 September 1998     

Multielemental trace analysis of biological materials using double focusing inductively coupled plasma mass spectrometry detection

The analytical potential of double focusing-inductively coupled plasma-mass spectrometry (DF-ICP-MS) for total elemental analysis in clinical samples (serum, blood, urine and other biological fluids), tissues and food products is illustrated by reviewing typical applications recently published. Also, the use of DF-ICP-MS as specific detector for trace element speciation in biological samples is discussed. After adequate separation of interferences in the chromatographic column, low resolution measurements (R = 300) can be used to provide enhanced sensitivities of more than 100 times compared with quadrupole-inductively coupled plasma-mass spectrometry (Q-ICP-MS). This capability is extremely valuable in speciation studies. Also, the use of DF-ICP-MS at low resolution could provide very precise isotope ratio measurements for isotope dilution analysis due to the ‘flat topped’ peaks obtained at this resolution. Unfortunately, the literature on these last two issues is rather scarce so far, in spite of their extremely high analytical possibilities for biological research. Moreover, the bright future of DF-ICP-MS as a most powerful multielemental detector for trace element applications in biological systems will be highlighted. Apart from applications detailed above other important application fields can be envisaged. In particular, we will speculate on its possible use to confirm/establish ‘reference values’ of trace element content in ‘normal’ populations and so to help to diagnose health and disease status, related with trace element total content or their speciation in clinical specimens.     

Finding the First Potential Inhibitors of Shikimate Kinase from Methicillin Resistant Staphylococcus aureus through Computer-Assisted Drug Design

Methicillin-resistant Staphylococcus aureus (MRSA) is an important threat as it causes serious hospital and community acquired infections with deathly outcomes oftentimes, therefore, development of new treatments against this bacterium is a priority. Shikimate kinase, an enzyme in the shikimate pathway, is considered a good target for developing antimicrobial drugs; this is given because of its pathway, which is essential in bacteria whereas it is absent in mammals. In this work, a computer-assisted drug design strategy was used to report the first potentials inhibitors for Shikimate kinase from methicillin-resistant Staphylococcus aureus (SaSK), employing approximately 5 million compounds from ZINC15 database. Diverse filtering criteria, related to druglike characteristics and virtual docking screening in the shikimate binding site, were performed to select structurally diverse potential inhibitors from SaSK. Molecular dynamics simulations were performed to elucidate the dynamic behavior of each SaSK–ligand complex. The potential inhibitors formed important interactions with residues that are crucial for enzyme catalysis, such as Asp37, Arg61, Gly82, and Arg138. Therefore, the compounds reported provide valuable information and can be seen as the first step toward developing SaSK inhibitors in the search of new drugs against MRSA.