Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

Indirect spectrophotometric determination of cyanide

A spectrophotometric method for cyanide based on its inhibition of the colour formation reaction between nickel(II) and 3-(4,5-dimethyl-2-thiazolylazo)-2,6-dihydroxybenzoic acid has been developed, and allows the determination of down to 0.1 g of cyanide. Most of the interferences can be avoided by displacement of the hydrogen cyanide using an arsine generator.     

Extraction and determination of phenolic derivatives in water samples by using polyoxyethylene surfactants and liquid chromatography with photodiode array detection

Methodology based on the cloud-point phenomenon was applied to the comparative study of 3 different polyoxyethylene nonionic surfactants in order to extract and preconcentrate a group of phenolic derivatives in water samples; these phenolic compounds, which were determined by liquid chromatography with UV detection, included 11 pollutants given priority by the U.S. Environmental Protection Agency. The optimum conditions for the extraction and preconcentration of phenolic compounds were established for each surfactant. The surfactant that gave the best extraction and preconcentration of the analytes under study was polyoxyethylene 6 lauryl ether (C12E6) with detection limits of <3.5 microg/L for all the phenolic compounds tested. The method was applied to seawater and depurated wastewater samples.     

Novel terpenoids from the West Indian sea whip Pseudopterogorgia elisabethae (Bayer). Elisapterosins A and B: rearranged diterpenes possessing an unprecedented cagelike framework

Four diterpenes and a nor-diterpenoid, all of which possess unusual carbocyclic skeletons, were isolated from the hexane solubles of the West Indian gorgonian Pseudopterogorgia elisabethae. The structures and relative configurations of novel metabolites elisabethin D (2), elisabethin D acetate (3), 3-epi-elisabanolide (5), elisapterosin A (6), and elisapterosin B (7) were elucidated by interpretation of overall spectral data, which included 2D NMR correlation methods, IR, UV, and accurate mass measurements (HREI-MS and HRFAB-MS), chemical reactions, and X-ray diffraction analyses. The tetracyclic carbon skeleton of the elisapterosins is undescribed and constitutes a new class of C(20) rearranged diterpenes. Elisapterosin B displays strong in vitro anti-tuberculosis activity.     

Bifunctional pincer-type organometallics as substrates for organic transformations and as novel building blocks for polymetallic materials

The reactivity of the bifunctionalized ligand NC(Br)N-I 1 [IC(6)H(2)(CH(2)NMe(2))(2)-3,5-Br-4] has been studied as a versatile synthon for organic and/or organometallic synthesis. Chemoselective metalation (M = Pd, Pt, Li) at the C(aryl)-I or C(aryl)-Br bonds was achieved by choosing the appropriate metal precursors. In this way a series of Pt(II) and Pd(II) complexes were prepared that have a second functional group available for further reactions. These Pt(II) and Pd(II) complexes were subjected to a wide range of organic and organometallic reactions, revealing the remarkable stability of their M-C sigma-bond and opening an easy route for the synthesis of mono- and (hetero)bimetallic building blocks. The scope of the chemistry of such building blocks shows that they are good candidates for use in the synthesis of dendrimers, bioorganometallic systems, or polymetallic materials. The X-ray crystal structures of the most representative complexes (2, 3a, 19, 20, and 24) are also reported.     

Comparison between high-performance liquid chromatography and gas chromatography methods for fatty acid identification and quantification in potato crisps

A reversed-phase high performance liquid chromatographic (RP-HLPC) method was compared with a gas chromatography-flame ionization detection (GC-FID) method for determining fatty acids in potato crisps. Different extraction procedures were used. Fatty acids were quantified by linear regression. Both methods presented good precision (R.S.D. < or = 5.88%) and recovery (> or = 82.31%). The precision using HPLC method was slightly better than for GC-FID method. There was good agreement between the fatty acid composition of potato crisps analysed by both methods. For most purposes the HPLC method would be better. However, when more fatty acids need to be analysed, GC is a more suitable method.     

Complex emulsion inversion pattern associated with the partitioning of nonionic surfactant mixtures in the presence of alcohol cosurfactant

Commercial ethoxylated nonionic surfactant mixtures containing alcohol cosurfactant exhibit a three-phase behavior whose formulation strongly varies with the water/oil ratio. As a consequence, a change in water/oil ratio can result in a sequence of up to three different emulsion inversion processes, through a combination of formulation and composition effects.     

Revealing structural effects: electrochemical reactions of butanols on platinum

Spectroelectrochemical studies on the reactivity of butanol isomers on Pt electrodes in perchloric acid medium led to the observation of structural effects that result from the different arrangements of atoms in the organic molecules. The use of differential electrochemical mass spectrometry (DEMS) to detect volatile products showed that all four isomers react on the electrode, though different product yields were observed for each compound. In spite of the differences in the electrochemical behaviour of the butanol isomers, a series of general processes accounts for the results obtained. The formation of strongly adsorbed residues by a dehydration process leading to the formation of a C=C bond was proposed for all isomers. Electroreduction of the adsorbates produces C(4) and C(3) alkanes, and the latter reveal the existence of a fragmentation process. The C(4) hydrocarbons can be formed by hydrogenation of these residues and by hydrogenolysis of alcohol molecules in the bulk solution which react at the electrode with adsorbed hydrogen. On the other hand, CO(2) is formed during electrooxidation of the adsorbed species. Partial-oxidation products containing a carbonyl group were detected from 0.2 M solutions of 1-butanol, isobutyl alcohol and sec-butyl alcohol. The tertiary alcohol tert-butyl alcohol only reacts in its adsorbed state.     

Copper(II) complexes with 4-amino-N-[4,6-dimethyl-2-pyrimidinyl]benzenesulfonamide. Synthesis, crystal structure, magnetic properties, EPR, and theoretical studies of a novel mixed mu-carboxylato, NCN-bridged dinuclear copper compound

New Cu(II) complexes of sulfamethazine (4-amino-N-[4,6-dimethyl-2-pyrimidinyl]benzenesulfonamide, HL) [Cu(2)(CH(3)COO)(2)(L)(2)].2dmf (1) and ([Cu(L)(2)].2H(2)O)(infinity) (2) were prepared and structurally characterized. Compound 1 crystallizes in the monoclinic system, space group P2(1)/n, with a = 8.9486(9) A, b = 15.0956(12) A, c = 16.542(3) A, beta = 105.584(15) degrees, and Z = 2. Compound 2 crystallizes in the monoclinic system, space group P2(1)/c, with a = 13.8097(8) A, b = 14.5765(4) A, c = 13.7853(15) A, beta = 96.033(9) degrees, and Z = 1. In compound 1 two copper ions are linked by two syn-syn acetates and two nonlinear NCN bridging groups pertaining to the deprotonated sulfamethazine ligands. Each copper center presents a nearly square planar geometry. Magnetic susceptibility data for 1 show a strong antiferromagnetic coupling with 2J = -216.7 cm(-)(1). The EPR spectra at the X- and Q-band frequencies present the signals corresponding to the dinuclear entity, being the zero-field splitting parameter, D = 0.265 cm(-)(1). The antiferromagnetic exchange coupling is discussed using DFT calculations on some model compounds with NCN bridging ligands and also on model structures with mixed mu-acetato and NCN bridges. The copper in the polymeric compound 2 is five coordinate. The CuN(5) chromophore has a highly distorted square pyramidal geometry with small axial N-Cu-N angles of 65.53(14) and 59.90(13) degrees. In the structure a sulfamethazinate anion binds to one copper through the sulfonamido and pyrimidine N atoms and to an adjacent copper via the amino N atom.