Preparation of trout liver microsomes for iron speciation in P-450 enzymes by AE–FPLC with ICP–(ORS)MS detection

Cytochromes P-450 are members of a superfamily of hemoproteins involved in the oxidative metabolism of various physiological and xenobiotic compounds in eukaryotes and prokaryotes. The multiplicity of this group of enzymes has been widely studied by chromatographic techniques, mainly high-performance liquid chromatography (HPLC). Because these enzymes are membrane-bound proteins, sample preparation for chromatographic separation of P-450 enzymes requires a solubilization step. The sample-preparation procedures are critical, because detergents affect not only the efficiency of protein solubilization but also their further chromatographic resolution. Trout liver microsomes have been taken here as a model sample to investigate iron speciation in cytochrome P-450. Trouts were treated intraperitoneally with -naphthoflavone, a potent inducer of some P-450 enzymes, and a microsomal suspension containing 7.4±0.1 nmol mL^–1 P-450 enzymes was obtained by ultracentrifugation. Lubrol PX was selected as detergent for solubilization, resulting in about 90% solubilization recovery. The solubilized cytochromes P-450 were further separated by AE–FPLC, with UV detection, or coupled to ICP–MS with an octapole reaction system, ICP–(ORS)MS (monitoring Fe signals at masses 54, 56, and 57). A sampling procedure and chromatographic conditions are developed and were successfully applied to iron speciation in trout liver P-450 enzymes. ICP–(ORS)MS detection of P-450 enzymes is Fe-specific and so will give accurate information on the prosthetic group of the protein, which can constitute an advantageous alternative to classical methods for detection of these hemoproteins.     

On the electrophoretic mobility and zeta potential of montmorillonite in non-aqueous media

Experimental results on the electrophoretic velocity and mobility of Ca-montmorillonite in 2-propanol are reported. The variation of the electrophoretic velocity with the externally applied electric field and the particle size range, at constant volume fraction and temperature, is considered. Given the difficulties for determining the types and concentrations of ions present in these liquid media, two methods are discussed for the estimation of the double layer thickness and hence the product, necessary for the determination of the zeta potential () of the interface. Although both methods of calculation yield different values of, the results for the zeta potential are very similar in the regions of and characteristic of our systems. The application to the experimental data of three theoretical relations between electrophoretic mobility and zeta potential is also discussed.     

Cross sections of the O+ + H2 --> OH+ + H ion-molecule reaction and isotopic variants (D2, HD): quasiclassical trajectory study and comparison with experiments

A dynamics study [cross section and microscopic mechanism versus collision energy (E(T))] of the reaction O+ + H2 --> OH+ + H, which plays an important role in Earth's ionosphere and interstellar chemistry, was conducted using the quasiclassical trajectory method, employing an analytical potential energy surface (PES) recently derived by our group [R. Martinez et al., J. Chem. Phys. 120, 4705 (2004)]. Experimental excitation functions for the title reaction, as well as its isotopic variants with D2 and HD, were near-quantitatively reproduced in the calculations in the very broad collision energy range explored (E(T) = 0.01-6.0 eV). Intramolecular and intermolecular isotopic effects were also examined, yielding data in good agreement with experimental results. The reaction occurs via two microscopic mechanisms (direct and nondirect abstraction). The results were satisfactorily interpreted based on the reaction probability and the maximum impact parameter dependences with E(T), and considering the influence of the collinear [OHH]+ absolute minimum of the PES on the evolution from reactants to products. The agreement between theory and experiment suggests that the reaction mainly occurs through the lowest energy PES and nonadiabatic processes are not very important in the wide collision energy range analyzed. Hence, the PES used to describe this reaction is suitable for both kinetics and dynamics studies.     

Computation in kinetics, III. A new method for kinetic model search based on simultaneous regression estimation of rate constants, stoichiometry and/or reaction order

Modified samples of natural mordenites have been found to catalyze the oxidative condensation of methane to yield ethane and ethylene. The selectivity towards C₂ hydrocarbons increases, whereas the acidity of zeolites falls.

---

, . C₂ .

     

Ab initio potential energy surface, variational transition state theory, and quasiclassical trajectory studies of the F+CH4-->HF+CH3 reaction

In this work we present a study of the F+CH(4)-->HF+CH(3) reaction (DeltaHdegrees(298 K)=-32.0 kcal mol(-1)) using different methods of the chemical reaction theory. The ground potential energy surface (PES) is characterized using several ab initio methods. Full-dimensional rate constants have been calculated employing the variational transition state theory and using directly ab initio data. A triatomic analytical representation of the ground PES was derived from ab initio points calculated at the second- and fourth-order M?ller-Plesset levels with the 6-311+G(2df,2pd) basis set, assuming the CH(3) fragment to be a 15 a.m.u. pseudoatom in the fitting process. This is suggested from experiments that indicate that the methyl group is uncoupled to the reaction coordinate. A dynamics study by means of the quasiclassical trajectory (QCT) method and employing this analytical surface was also carried out. The experimental data available on the HF internal states distributions are reproduced by the QCT results. Very recent experimental information about the reaction stereodynamics is also borne out by our QCT calculations. Comparisons with the benchmark F+H(2) and analogous Cl+CH(4) reactions are established throughout.     

Surface tension and density of mixtures of 1,3-dioxolane+alkanols at 298.15 K: analysis under the extended Langmuir model

Surface tensions (sigma) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol] and excess molar volumes (v(E)) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, and 2-butanol] at the temperature 298.15 K and normal atmospheric pressure have been determined as a function of mole fractions. The magnitude of these experimental quantities is discussed in terms of the nature and type of intermolecular interactions in binary mixtures. In order to analyze the surface tension behavior, the extended Langmuir (EL) model was used and the results obtained for the systems containing 1,3-dioxolane were compared with those of other formerly published series: [1,4-dioxane+alkanes] and [1,4-dioxane+alcohols].     

Trace determination of organotin compounds in water,sediment and mussel samples by low-pressure gas chromatography coupled to tandem mass spectrometry

A fast method for the determination of eight organotin compounds (OTs), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), monophenyltin (MPhT), diphenyltin (DPhT), triphenyltin (TPhT) and tetraphenyltin (TePhT), in water, sediments and mussels, was developed using low-pressure gas chromatography/tandem mass spectrometry (LPGC/MS/MS). The method is based on sodium diethyldithiocarbamate (DDTC) complexation of the ionic organotins, followed by extraction of the target matrices and derivatization by a Grignard reagent, as described in a previously published method for water samples. Solid-phase extraction was selected as extraction method from water samples after comparison with liquid-liquid extraction, but extraction of the OTs from sediment and mussel samples was performed using toluene. Matrix-matched calibration standards were used to minimize matrix effects. The analytical process was validated by the analysis of spiked blank samples. Performance characteristics such as linearity, detection limit (LOD), quantitation limit (LOQ), precision, and recovery were determined. Recoveries of OTs in spiked matrices ranged from 86-108% in water and from 78-110% in sediments and mussels, with precision values lower than 18%. Detection limits ranged from 0.1-9.6 ng L(-1) in water, and 0.03-6.10 microg kg(-1) in the other matrices. The present implementation of LPGC rather than conventional capillary GC permitted use of large-volume injection and reduced analysis time by a factor of two. The proposed methodology was applied to the determination of OTs in real samples of water, marine sediments and mussels from the west coast of the Mediterranean Sea (Spain).     

Determination of trace levels of mercury in water samples based on room temperature phosphorescence energy transfer

A novel method has been developed for the sensitive determination of mercury in aqueous media by room temperature phosphorescence (RTP). The measurement principle is based on the energy transfer (ET) from a phosphor molecule (acting as a donor) to a Hg-sensitive dye (acceptor). To our acknowledgment this is the first RTP method for mercury measurement developed so far. α-Bromonaphthalene (BrN) was selected as the phosphorescent donor molecule (BrN can produce significant RTP emission in aqueous media in a β-cyclodextrin rigid microenvironment without deoxygenation).The absorption spectrum of the complex formed between mercury and the dithizone dye possesses a desirable spectral overlap with the RTP emission spectrum of the donor (BrN), giving rise to a nonradiative ET from the phosphor molecules to the mercury complex. An increase in the concentration of Hg(II) causes an increase on the concentration of the dithizone complex (acceptor) with the subsequent increase of the absorbance and, therefore, resulting in a decrease of the RTP emission. Both, RTP intensities and triplet lifetimes of the BrN decreased with increases on the Hg(II) concentration.Possible interferences present in natural waters, including different cations and anions, which could affect the analytical response, were evaluated and the analytical performance characteristics investigated. The use of phosphorescence measurements (low background noise signals) resulted in an improvement on the sensitivity of the Hg(II) detection higher than five times as compared to the molecular absorption spectrophotometric method for Hg(II) detection based on dithizone as Hg-indicator. A detection limit (D.L.) of 14 ng ml⁻¹ of Hg(II) was obtained by RTP with a precision of ±4.8% for five replicates of 300 ng ml⁻¹ of Hg(II). The usefulness of the method was successfully evaluated by the determination of Hg(II) in spiked natural water samples.     

Temperature dependence of second critical micelle concentration of dodecyldimethylbenzylammonium bromide in aqueous solution

The specific conductivity of dodecyldimethylbenzylammonium bromide (C12BBr) in aqueous solutions, in the temperature range of 15 to 40 °C, has been measured as a function of molality. The two breaks which were found on the conductivity against molality plots were attributed to the critical micelle concentration, cmc, and second critical micelle concentration, 2^nd cmc, respectively. The ratio of the slopes, S, of the three linear fragments on the plots, S2/S1 and S3/S1, was attributed to the degree of ionization of the micelles at cmc and 2^nd cmc respectively. It was shown that the values of the 2^nd cmc estimated above 27 °C are only apparent due to thermal disintegration of the micelles. In the temperature range of 15 to 27 °C, the values of the 2^nd cmc increase gradually and the plot of the 2^nd cmc against temperature is concave. The ratio of 2^nd cmc/cmc for C12BBr at 25 °C amounts to 15 and appears to be high compared to the literature values for other surfactants. For comparative purposes the cmc and 2^nd cmc values were also estimated conductometrically for decyldimethylbenzylammonium bromide (C10BBr) at 25 °C. The 2^nd cmc value for this surfactant is higher compared to the value for the C12 homologue by a factor of 2.6.The standard Gibbs free energies of micellization at cmc and at the 2^nd cmc were estimated from the experimental data for both surfactants at 25 °C.     

Nitrosation of Phenolic Compounds: Effects of Alkyl Substituents and Solvent

Summary.  Nitrosation reactions of phenol, o-cresol, 2,6-dimethylphenol, o-tert-butylphenol, 2-hydroxyacetophenone, and 2-allylphenol in water and water/acetonitrile were studied. Kinetic monitoring of the reactions was accomplished by spectrophotometric analysis of the nitrosated products at 345 nm. The dominant reaction was C-nitrosation via a mechanism consisting of an attack on the nitrosatable substrate by NO⁺/NO₂H₂ ⁺ followed by a slow proton transfer. The values of the rate constants of phenolic C-nitrosation were increased by electron donating substituents, and a good Hammett correlation was observed with ρ = −6.1. The results also revealed the strong effect of pH and the permitivity of the reaction medium on the rate constant, whose maximum values were observed for pH ≈ 3, decreasing strongly for higher pH values. The study in water/acetonitrile with up to 25% acetonitrile showed that it is possible to inhibit the reaction strongly by increasing the percentage of the organic component. The conclusions drawn show that (i) it is possible to predict the rate of nitrosation of phenolics as a function of the meta-substituents on the phenol ring and (ii) the nitrosation of phenolics can be strongly inhibited by increasing the pH of the reaction medium as well as by lowering its dielectric constant. Received July 13, 2001. Accepted (revised) September 18, 2001