Complexes of Al(III) with d-gluconic acid

The complexation of Al(III) with d-gluconic acid was studied in solution by means of pH-potentiometry, ESI mass spectrometry and one- and two-dimensional NMR spectroscopy. Six complexes were found to form in solution from pH 2 to 10: [AlL]²⁺, [AlLH₋₁]⁺, [AlLH₋₂], [AlLH₋₃]⁻, [AlL₂H₋₁] and [AlL₂H₋₂]⁻. NMR spectroscopy indicated very complicated chemical exchange processes between the free ligand and gluconic acid molecules bound in the metal complexes, with different coordination modes resulting in changes both of the chemical shift and of the line shape of the signals. A solid complex [AlL₂H₋₁] · 2H₂O was isolated as a microcrystalline powder and characterized. The structures of the complexes are discussed on the basis of the spectroscopic results and MM force field calculations.     

A simple helical macrocyclic polyazapyridinophane as a stereoselective receptor of biologically important dicarboxylates under physiological conditions

The interaction of a synthetic enantiopure azamacrocyclic receptor (L) with biologically important chiral dicarboxylates (A, 1-7) has been studied by means of potentiometric titrations in 0.15 M NaCl aqueous solution in a wide pH range. This macrocycle forms strong complexes of the type [HnLA](n-2) (with n = 0-5). As a general trend, the binding is much tighter at basic or neutral pH than in acidic medium. Interestingly, nonprotected excitatory amino acids (Asp and Glu) are strongly bound even at acidic pH. Regarding selectivity, the receptor showed stereoselective binding toward those substrates bearing an H-bonding donor at Calpha, being S-selective in most of the cases, except for glutamic acid. Thus, L displayed an excellent enantioselectivity for (S)-malate dianion (KS/KR = 11.50 at pH 10.0 and KS/KR = 6.86 at pH 7.0) and exhibited moderate enantiopreference for (S,S)-tartrate (KSS/KRR = 3.01 at pH 10 and KSS/KRR = 1.70 at pH 7.0). For this last anion, a very good diastereopreference was also observed (KSS/KRS = 8.46 at pH 10 and KSS/KRS = 4.99 at pH 7.0). On the contrary, L is smoothly R-selective toward (R)-Glu (KR/KS = 3.22 at pH 10 and KR/KS = 2.05 at pH 7.0) due to its longer and more flexible molecular structure. The stereoselectivity of the corresponding complexes decreased when decreasing pH values. For the hydroxy derivatives, mass spectrometry also reflected the trends observed by potentiometry and confirmed the receptor:dicarboxylate 1:1 stoichiometry of the supramolecular complexes. Additional experimental techniques were used to study the most stereoselective example. Solution studies by NMR suggested a good geometrical complementarity between the malate dianion and the receptor, which showed a predominant helical conformation in solution. Besides, self-diffusion rates (PGSE) of the diastereomeric complexes with malate also agree with binding data. Circular dichroism was also used in this case at different pH values, showing a very good correlation between the helical content of the receptor and the stereoselectivity of the molecular recognition process.     

Real‐Time In Vivo Detection of Cellular Senescence through the Controlled Release of the NIR Fluorescent Dye Nile Blue

In vivo detection of cellular senescence is accomplished by using mesoporous silica nanoparticles loaded with the NIR‐FDA approved Nile blue (NB) dye and capped with a galactohexasaccharide ( S3 ). NB emission at 672 nm is highly quenched inside S3 , yet a remarkable emission enhancement is observed upon cap hydrolysis in the presence of β‐galactosidase and dye release. The efficacy of the probe to detect cellular senescence is tested in vitro in melanoma SK‐Mel‐103 and breast cancer 4T1 cells and in vivo in palbociclib‐treated BALB/cByJ mice bearing breast cancer tumor.     

Synthesis, structure and reactivity of homobimetallic Rh(I) and Ir(I) complexes of s- and as-indacene-diide

The Rh(COD) and Ir(COD) homobimetallic complexes of s-indacene-diide, 2,6-dimethyl-s-indacene-diide, as-indacene-diide, and 2,7-dimethyl-as-indacene-diide have been synthesized from the di-lithium salts of the dianions and metal dimers [M(μ-Cl)L₂]₂ (M = Rh, Ir; L₂ = COD, NBD, (ethylene)₂, (CO)₂ as mixtures of syn and anti isomers. The syn/anti ratio depends on the nature of the ancillary ligands at the metal and on the s or as geometry of the bridging ligand. In the reaction of the 2,7-dimethyl-as-indacene-diide-[M(COD)]₂ species with CO, the higher reactivity of the syn isomers has been justified on the basis of a greater instability of the ground state due to steric interactions between the COD groups. Bis-η¹ metal-bonded intermediates have been identified in the carbonylation of iridium derivatives; on the other hand, the formation of the bis-η⁵ mixed complexes syn and anti-{2,7-dimethyl-as-indacene-diide-[Rh(COD)][Rh(CO)₂]} and their reactivity strongly support the existence of metal---metal interaction in the rhodium derivatives.     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.     

Ferrocenyl-substituted fluorescent anthracenes and anthraquinones

The synthesis of a range of ferrocene-substituted ethynylanthracenes and 1,1^′-(bis-(2-ethenylanthraquinoyl)ferrocene has been achieved. The synthesis relies on the production of ferrocenylanthraquinones as key precursors. The products were obtained in the reactions of ferrocenylanthraquinones with phenylethynyllithium or trimethylsilylethynyllithium followed by reduction with tin chloride. The key products such as 1- and 2-ferrocenyl(9,10-bis-phenylethynyl)anthracenes have been characterised by X-ray single crystal diffraction.     

First preparative synthesis of a 3-acetamido-3,6-dideoxy-d-galactopyranose glycosyl donor via intramolecular cyclization of an epoxytrichloroacetimidate

The preparative synthesis of a 3-acetamido-3,6-dideoxy-d-galactopyranose N-phenyl-trifluoroacetimidate donor has been accomplished using as key step a silica gel mediated cyclization of an epoxytrichloroacetimidate, while other more conventional routes to aminosugars failed. Test glycosylations with the N-phenyl-trifluoroacetimidate donor are also reported.     

Synthesis of Nature‐Inspired Medium‐Sized Fused Heterocycles from Amino Acids

Herein, we describe the synthesis of molecular scaffolds consisting of medium‐sized fused heterocycles using amino acids, which are some of the most useful building blocks used by nature as well as chemists to create structural diversity. The acyclic precursors were assembled by using traditional Merrifield solid‐phase peptide synthesis, and cyclization was carried out through acid‐mediated tandem endocyclic N‐acyliminium ion formation, followed by nucleophilic addition with internal nucleophiles. The synthesis of molecular scaffolds consisting of seven‐, eight‐, and nine‐membered rings proceeded with full stereocontrol of the newly generated stereogenic center in most cases.     

Potential of prodendronic polyamines with modulated segmental charge density as novel coating for fast and efficient analysis of peptides and basic proteins by CE and CE‐MS

In this work, the suitability of a new polymer family has been investigated as capillary coatings for the analysis of peptides and basic proteins by CE. This polymer family has been designed to minimize or completely prevent protein–capillary wall interactions and to modify the EOF. These coating materials are linear polymeric chains bearing as side cationizable moiety a dentronic triamine derived from N,N,N’,N’‐tetraethyldiethylenetriamine (TEDETA), which is linked to the backbone through a spacer (unit labeled as TEDETAMA). Four different polymers have been prepared and evaluated: a homopolymer which comprised only of those cationizable repetitive units of TEDETAMA, and three copolymers that randomly incorporate TEDETAMA together with neutral hydrosoluble units of N‐(2‐hydroxypropyl) methacrylamide (HPMA) at different molar percentages (25:75, 50:50 and 75:25). It has been demonstrated that the composition of the copolymers influences the EOF and therefore the separation of the investigated biopolymers. Among the novel polymers studied, poly‐(TEDETAMA‐co‐HPMA) 50:50 copolymer was successfully applied as coating material of the inner capillary surface in CE‐UV and CE‐MS, providing EOF reversing together with fast and efficient baseline separation of peptides and basic proteins. Finally, the feasibility of the polymer‐coated capillary was shown through the analysis of lysozyme in a cheese sample.     

Galvanostatically Deposited PtNi Thin-Films as Electrocatalysts for the Hydrogen Evolution Reaction

The synthesis of hybrid platinum materials is fundamental to enable alkaline water electrolysis for cost-effective H₂ generation. In this work, we have used a galvanostatic method to co-deposit PtNi films onto polycrystalline gold. The surface concentrations of Ni (Γ_Ni) and Pt (Γ_Pt) were calculated from electrochemical measurements; the Γ_Pt/Γ_Ni ratio and electrocatalytic activity of these materials towards hydrogen evolution reaction (HER) in 1 M KOH show a strong dependence on the current density pulse applied during the electrodeposition. Analysis of the Tafel parameters hints that, on these deposits, HER proceeds through a Volmer-Heyrovsky mechanism. The galvanostatically deposited PtNi layers present a high current output per Pt gram, 3199 A g_Pt⁻¹, which is significantly larger compared to other PtNi-based materials obtained by more extended and more complex synthesis methods.