Visible light-induced water oxidation on mesoscopic alpha-Fe2O3 films made by ultrasonic spray pyrolysis

Alpha-Fe(2)O(3) films having a mesoscopic leaflet type structure were produced for the first time by ultrasonic spray pyrolysis (USP) to explore their potential as oxygen-evolving photoanodes. The target of these studies is to use translucent hematite films deposited on conducting fluorine doped tin oxide (FTO) glass as top electrodes in a tandem cell that accomplishes the cleavage of water into hydrogen and oxygen by sunlight. The properties of layers made by USP were compared to those deposited by conventional spray pyrolysis (SP). Although both types of films show similar XRD and UV-visible and Raman spectra, they differ greatly in their morphology. The mesoscopic alpha-Fe(2)O(3) layers produced by USP consist mainly of 100 nm-sized platelets with a thickness of 5-10 nm. These nanosheets are oriented mainly perpendicularly to the FTO support, their flat surface exposing (001) facets. The mesoscopic leaflet structure has the advantage that it allows for efficient harvesting of visible light, while offering at the same time the very short distance required for the photogenerated holes to reach the electrolyte interface before recombining with conduction band electrons. This allows for water oxidation by the valence band holes even though their diffusion length is only a few nanometers. Distances are longer in the particles produced by SP favoring recombination of photoinduced charge carriers. Open-circuit photovoltage measurements indicate a lower surface state density for the nanoplatelets as compared to the round particles. These factors explain the much higher photoactivity of the USP compared to the SP deposited alpha-Fe(2)O(3) layers. Addition of hydrogen peroxide to the alkaline electrolyte further improves the photocurrent-voltage characteristics of films generated by USP indicating the hole transfer from the valence band of the semiconductor oxide to the adsorbed water to be the rate-limiting kinetic step in the oxygen generation reaction.     

A quantitative determination of the polymerization of benzoxazine thin coatings by time-of-flight secondary ion mass spectrometry

Phenol-paraphenylenediamine (P-pPDA) benzoxazines exhibit excellent barrier properties, adequate to protect aluminum alloys from corrosion, and constitute interesting candidates to replace chromate-containing coatings in the aeronautical industry. For the successful application of P-pPDA coatings, it is necessary to decrease the curing temperature to avoid the delamination of the coating while preserving the mechanical properties of the alloy, as well as the barrier properties of the coating. However, decreasing the curing temperature leads to less polymerized films, the extent of which requires a quantitative assessment. While the conversion rate of the polymerization reaction is commonly evaluated for bulk samples using differential scanning calorimetry (DSC), a tool for its evaluation in thin films is missing. Therefore, a new approach was developed for that matter using time-of-flight secondary ion mass spectrometry (ToF-SIMS). The relation between the SIMS data integrated from inside thin films and the DSC results obtained on bulk samples with the same curing cycle allowed to calibrate the SIMS data. With this preliminary calibration of the technique, the polymerization of P-pPDA coatings can be locally determined, at the surface and along the depth of the coating, using dual-beam depth profiling with large argon cluster beam sputtering.     

Buffers for the Physiological pH Range: Studies of 4-(N-Morpholino)butanesulfonic Acid (MOBS) from 5 to 55 °C

In this study, we report the pH values of two buffer solutions without chloride ion and eight buffer solutions with NaCl with an ionic strength I=0.16 mol?kg^?1. Electromotive force (emf) techniques have been used to get the cell potentials at 12 temperatures from 5 to 55?°C, including 37?°C. An extended form of the Bates-Guggenheim convention is used in the entire ionic strength range, 0.04 to 0.16?mol?kg^?1. The residual liquid junction potentials (??E _j ) of the buffer solutions of MOBS have been estimated from previous measurements with a flowing junction cell. These values of ??E _j have been used for correction in order to ascertain the operational pH values of four buffer solutions of MOBS at 25 and 37?°C. These solutions are recommended as pH standards for physiological application in the pH range 7.4 to 7.7.     

Synthesis of NMP/RAFT inifers and preparation of block copolymers

Two different initiator/transfer agents (inifers) containing an alkoxyamine and a dithiobenzoate were synthetized and used to trigger out either reversible addition‐fragmentation chain transfer (RAFT) polymerization or nitroxide‐mediated polymerization (NMP). α‐Dithiobenzoate‐ω‐alkoxyamine‐difunctional polymers were produced in both cases which were subsequently used as precursors in the formation of block copolymers. This synthetic approach was applied to N‐isopropylacrylamide (NIPAM) or polyethylene oxide methacrylate (EOMA) to form α,ω‐heterodifunctional homopolymers via RAFT at 60°C which were chain extended with styrene by activating the alkoxyamine moiety at 120°C. Under such temperature conditions, it is proposed that a tandem NMP/RAFT polymerization is initiated producing a simultaneous growth of polystyrene blocks at both chain‐ends. Self‐assembled nanostructures of these amphiphilic block copolymers were evidenced by scanning electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Nonaqueous capillary electrophoretic separation of basic enantiomers using octakis(2,3-O-dimethyl-6-O-sulfo)-gamma-cyclodextrin, a new, single-isomer chiral resolving agent

The enantiomers of 34 pharmaceutical weak-base analytes were separated by nonaqueous capillary electrophoresis in acidic methanol background electrolytes using the sodium salt of the new, single-isomer chiral resolving agent, octakis(2,3-O-dimethyl-6-O-sulfo)-gamma-cyclodextrin (ODMS). The effective mobilities, separation selectivities and peak resolution values of the weak-base analytes were determined as a function of the ODMS concentration in the 0-40 mM range and were found to follow the theoretical predictions of the charged resolving agent migration model (CHARM model) modified for ionic strength effects. Fast, efficient separations were achieved for both comparatively small and large enantiomers.     

Direct C-glycosylation by indium-mediated alkynylation on sugar anomeric position

Indium-mediated alkynylation reaction was studied for the direct preparation of C-glycosides. Easily available starting sugar derivatives with an acetyl group at the anomeric position were tested as electrophiles toward alkynylindium reagents under Barbier conditions. Good yields and stereoselectivities were observed during the reaction. The alkynylation was applied to the synthesis of an alpha-(1-->6)-C-disaccharide analogue of isomaltoside.     

Asymmetric Transfer Hydrogenation of gem-Difluorocyclopropenyl Esters: Access to Enantioenriched gem-Difluorocyclopropanes

Catalytic enantioselective access to disubstituted functionalized gem-difluorocyclopropanes, which are emerging fluorinated motifs of interest in medicinal chemistry, was achieved through asymmetric transfer hydrogenation of gem-difluorocyclopropenyl esters, catalyzed by a Noyori–Ikariya (p-cymene)-ruthenium(II) complex, with (N-tosyl-1,2-diphenylethylenediamine) as the chiral ligand and isopropanol as the hydrogen donor. The resulting cis-gem-difluorocyclopropyl esters were obtained with moderate to high enantioselectivity (ee=66–99 %), and post-functionalization reactions enable access to valuable building blocks incorporating a cis- or trans-gem-difluorocyclopropyl motif.     

Environmentally Compatible Access to α-Trifluoromethylseleno-Enones

α-Trifluoromethylselenolated enones constitute valuable building-blocks for further synthesis of innovative fluorinated compounds. Herein, we described an easy access to such compounds in green conditions through a Morita-Baylis-Hillman like reaction. These conditions have also been extended to higher fluorinated homologs.     

One‐Pot Synthesis of O‐Allylhydroxylamines through the Organocatalytic Oxidation of Tertiary Allylic Amines Followed by a [2,3]‐Meisenheimer Rearrangement

A cheap, green, and highly efficient one‐pot method for the synthesis of O‐protected allylic alcohols is described. By utilizing 2,2,2‐trifluoroacetophenone as the organocatalyst and H₂O₂ as the oxidant, a variety of allylic amine N‐oxides were synthesized, which upon heating are converted to the final products through a [2,3]‐Meisenheimer rearrangement.