14‐Membered Cyclopeptides from Paliurus ramosissimus and P. hemsleyanus

Six 14‐membered cyclopeptide alkaloids, i.e., ramosines A–C, mucronine J, and lotusines A and D, were isolated from the roots of Paliurus ramosissimus, and an additional four, hemsines A–D, from the roots of P. hemsleyanus. Among these, ramosines A–C ( 1, 5 , and 6 , resp.) and hemsines A and B ( 7 and 8 , resp.) are new bases of the amphibine‐B type, and hemsines C and D ( 9 and 10 , resp.) are new integerrine‐type alkaloids. Additionally, ramosine C ( 6 ) represents the first 14‐membered cyclopeptide alkaloid possessing a substitution (? OH) at C(13′). Their structural elucidations were based on spectral analysis and molecular‐modeling studies. Pronounced solvent effects in the ¹H‐ and ¹³C‐NMR spectra of these two types of alkaloids were observed.     

Robust Preparation of Atomic Concatenated Greenberger–Horne–Zeilinger States via Shortcuts to Adiabaticity

Here, a protocol for robust preparation of an atomic concatenated Greenberger–Horne–Zeilinger (C‐GHZ) state via shortcuts to adiabaticity (STA) is proposed. The devices for implementing the protocol consist of atoms, cavities, and the optical fibers, which are feasible with current technology. The atoms are trapped in the separated cavities allowing individual control over each atom with classical fields. STA helps to design Rabi frequencies of classical fields so that the atoms can be driven from the initial states to the target states. The numerical simulations show that the protocol holds robustness against atomic spontaneous emissions and photonic leakages. Thus, the protocol may be realized by experiments in the near future.     

A rapid and selective HPLC‐UV method for the quantitation of efavirenz in plasma from patients on concurrent HIV/AIDS and tuberculosis treatments

Owing to heterogeneity in therapeutic response, efavirenz is of research and clinical interest. There is a need to quantitate it using noncostly and selective methods. A method for efavirenz quantitation in plasma containing HIV and tuberculosis drugs was developed. Chromatographic separation was carried out using a C₁₈ column. The mobile phase consisted of 0.1% formic acid and acetonitrile, and was pumped at a flow rate of 0.3 mL/min. Efavirenz and ritonavir (internal standard) were monitored at 247 nm. Plasma proteins were precipitated by centrifugation. The analysis time was 6 min. The response was linear (r = 0.9997). The accuracy ranged between 98 and 115% (intraday) and between 99 and 117% (interday). The precision ranged from 1.670 to 4.087% (intraday) and from 3.447 to 13.347% (interday). Recovery ranged from 98 to 132%. Stability ranged between 99 and 123%. The selectivity was proven by analysis of drugs used for the management of HIV/AIDS and tuberculosis. Plasma sample analysis showed an efavirenz retention time of 5.57 min and a peak plasma concentration of 2.4 µg/mL occurring at 2 h. This method is rapid and selective, and thus suitable for monitoring efavirenz in patients with HIV/AIDS alone or co‐infected with tuberculosis in a less resourced setting. Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneous determination of morniflumate and its major active metabolite,niflumic acid,in human plasma by high‐performance liquid chromatography in stability and pharmacokinetic studies

A rapid, sensitive and stable high‐performance liquid chromatography (HPLC) method was developed and validated for the simultaneous determination of morniflumate and its major active metabolite, niflumic acid, in human plasma. HPLC analysis was carried out using a 5 µm particle size, C₁₈‐bonded silica column with a mixture of acetonitrile and 0.005 m potassium phosphate monobasic in water (60:40, v/v) as the mobile phase and UV detection at 287 nm. The method involved the treatment with 50 μL of 0.4 m hydrochloric acid for the stability of morniflumate, extraction with diethylether and evaporation to dryness under a nitrogen stream. The lower limit of quantitation for morniflumate and niflumic acid was 50 and 500 ng/mL, respectively. The calibration curves for morniflumate and niflumic acid were linear over the concentration range of 50–20,000 ng/mL and 500–50,000 ng/mL, respectively, with correlation coefficients greater than 0.9995 and inter‐ or intra‐batch coefficients of variation not exceeding 13.79%. The variability (percentage difference) of incurred sample re‐analysis did not exceed 11.72% and all of the repeat samples fell within 20% of the mean value. This assay procedure was applied successfully to an examination of the pharmacokinetics of morniflumate and its metabolite, niflumic acid, in human subjects. Copyright © 2013 John Wiley & Sons, Ltd.     

A Shortcut Application of a Flory‐Like Model to Asphaltene Precipitation

A model, previously developed to determine the asphaltene precipitation onset, considered that asphaltene separation is ruled by the solvent quality of the surrounding media. Here, it is shown that it is equivalent to Flory‐Huggins model, when it is hypothesized that the asphaltene concentration is always in the instability range. With this, the controversy on the use of a concentration‐dependent model to describe a phenomenon that is practically independent of concentration is by‐passed. Moreover, improvements of the model are presented, together with sensitivity analysis with respect to its parameters. Two field case applications are reported, showing that the model gives a reasonable fit.     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Clicked (AB)2C‐type miktoarm terpolymers: Synthesis,thermal and self‐assembly properties,and preparation of nanoporous materials

A well‐defined (PEO‐PS)₂‐PLA miktoarm terpolymer ( 1 ) was synthesized by stepwise click reactions of individually prepared poly(ethylene oxide) (PEO), polystyrene (PS, polymerized by atom transfer radical polymerization), and polylactide (PLA, polymerized by ring‐opening polymerization) blocks. As characterized by differential scanning calorimetry and small‐angle X‐ray scattering techniques, the terpolymer self‐assembled into a hexagonal columnar structure consisting of PLA/PEO cylindrical cores surrounded by PS chains. In contrast, the ion‐doped sample ( 1‐Li⁺ ) with lithium concentration per ethylene oxide = 0.2 exhibited a three‐phase lamellar structure, which was attributed to the microphase separation between PEO and PLA blocks and to the conformational stabilization of the longest PLA chain. The two‐phase columnar morphology before the ion doping was used to prepare a nanoporous material. PLA chains in the cylindrical core region were hydrolyzed by sodium hydroxide, producing nanopores with a pore diameter of about 14 nm. The resulted nanoporous material sank to the bottom in water, because of water‐compatible PEO chains on the walls. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Imide‐functionalized naphthodithiophene based donor‐acceptor conjugated polymers for solar cells

Donor‐acceptor conjugated polymers containing a new imide‐functionalized naphthodithiophene (INDT) as the acceptor unit and a 2,2'‐bithiophene with varied substituents as the donor unit have been synthesized. The bandgaps of these polymers depend strongly on the dihedral angle of the 2,2'‐bithiophene unit. The 3,3'‐dialkoxy substitution (polymers PDOR / PBOR ) leads to near planar bithiophene conformation due to the well‐known S–O short contact, while the 3,3'‐dialkyl substitution (polymer PDR ) results in significant twisting due to the steric effect. Consequently PDOR / PBOR shows the lowest bandgap of 1.82/1.85 eV while PDR has a bandgap of 2.38 eV. Bulk‐heterojunction solar cells of the polymer/fullerene blends have been fabricated. Preliminary results show that PBOR gives the best device performance with power conversion efficiencies as high as 2.45% in air without any thermal annealing treatment, indicating the promising potential of INDT‐containing conjugated polymers for efficient solar cells. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3818–3828     

Synthesis of two dihydropyrroloindoledione‐based copolymers for organic electronics

Two novel dihydropyrroloindoledione (DPID)‐based copolymers have been synthesized in a two directional approach and characterized (gel permeation chromatography (GPC), ultraviolet‐visible (UV–vis), cyclic voltammetry, and computational models). These planar, broad absorption copolymers show promise for use in organic electronics, with deep energy levels and low bandgaps. The two‐directional Knoevenagel condensation used demonstrates the versatility of DPID as a useful yet underexploited conjugated unit. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013