The role of fluorine in the stereoselective tandem aza-Michael addition to acrylamide acceptors: an experimental and theoretical mechanistic study

Aza-Michael additions of alpha-amino esters to fluorinated acceptors take place in a highly stereoselective manner, to give partially modified Psi[NHCH2]retropeptides incorporating a hydrolytically stable trifluoroalanine mimic. The reaction mechanism has been investigated experimentally and theoretically, in order to explain the effect of the trifluoromethyl group on the reactivity and the origins of the experimentally observed stereocontrol. The reaction is a two-step process, involving a tandem aza-Michael addition followed by a stereoselective hydrogen transfer. Both steps are base-catalyzed. The high level of stereocontrol is the result of a combination of electrostatic interactions and steric effects.     

Light-driven horseradish peroxidase cycle by using photo-activated methylene blue as the reducing agent

In this work, the regeneration of native horseradish peroxidase (HRP), following the consecutive reduction of oxo-ferryl pi-cation (compound I) and oxo-ferryl (compound II) forms, was observed by UV-visible spectrometry and electron paramagnetic resonance (EPR) in the presence of methylene (MB+), in the dark and under irradiation. In the dark, MB+ did not affect the rate of HRP compound I and II reduction, compatible with hydrogen peroxide as the solely reducing species. Under irradiation, the dye promoted a significant increase in the native HRP regeneration rate in a pH-dependent manner. Flash photolysis measurements revealed significant redshift of the MB+ triplet absorbance spectrum in the presence of native HRP. This result is compatible with the dye binding on the enzyme structure leading to the increase in the photogenerated MB* yield. In the presence of HRP compound II, the lifetime of the dye at 520 nm decreased approximately 75% relative to the presence of native HRP that suggests MB* as the heme iron photochemical reducing agent. In argon and in air-saturated media, photoactivated MB+ led to native HRP regeneration in a time- and concentration-dependent manner. The apparent rate constant for photoactivated MB+-promoted native HRP regeneration, in argon and in air-saturated medium and measured as a function of MB+ concentration, exhibited saturation that is suggestive of dye binding on the HRP structure. The dissociation constant (KMB) observed for the binding of dye to HRP was 5.4+/-0.6 microM and 0.57+/-0.05 microM in argon and air-saturated media, respectively. In argon-saturated medium, the rate of the conversion of HRP compound II to native HRP was significantly higher, k2argon=(2.1+/-0.1)x10(-2) s(-1), than that obtained in air-equilibrated medium, k2air=(0.73+/-0.02)x10(-2) s(-1). Under these conditions the efficiency of photoactivated MB(+)-promoted native HRP regeneration was determined in argon and air-equilibrated media as being, respectively: k2/KMB=3.9x10(3) and 12.8x10(3) M(-1) s(-1).     

Surface hydrophobicity modulates the operation of actomyosin-based dynamic nanodevices

We studied the impact of surface hydrophobicity on the motility of actin filaments moving on heavy-meromyosin (HMM)-coated surfaces. Apart from nitrocellulose (NC), which is the current standard for motility assays, all materials tested are good candidates for microfabrication: hydrophilic and hydrophobic glass, poly(methyl methacrylate) (PMMA), poly(tert-butyl methacrylate) (PtBuMA), and a copolymer of O-acryloyl acetophenone oxime with a 4-acryloyloxybenzophenone (AAPO). The most hydrophilic (hydrophilic glass, contact angle 35 degrees) and the most hydrophobic (PtBuMA, contact angle 78 degrees) surfaces do not maintain the motility of actin filaments, presumably because of the low density of adsorbed HMM protein or its high levels of denaturation, respectively. The velocity of actin filaments presents higher values in the middle of this "surface hydrophobicity motility window" (NC, PMMA), and a bimodal distribution, which is more apparent at the edges of this motility window (hydrophobic glass and AAPO). A molecular surface analysis of HMM and its S1 units suggests that the two very different, temporally separated conformations of the HMM heads could exacerbate the surface-modulated protein behavior, which is common to all microdevices using surface-immobilized proteins. An explanation for the above behavior proposes that the motility of actin filaments on HMM-functionalized surfaces is the result of the action of three populations of motors, each in a different surface-protein conformation, that is, HMM with both heads working (high velocities), working with one head (low velocities), and fully denatured HMM (no motility). It is also proposed that the molecularly dynamic nature of polymer surfaces amplifies the impact of surface hydrophobicity on protein behavior. The study demonstrates that PMMA is a good candidate for the fabrication of future actomyosin-driven dynamic nanodevices because it induces the smoothest motility of individual nano-objects with velocities comparable with those obtained on NC.     

Biostimulation of Na,K-ATPase by low-energy laser irradiation (685 nm, 35 mW): comparative effects in membrane, solubilized and DPPC:DPPE-liposome reconstituted enzyme

OBJECTIVE: The aim of the present work was to investigate the effect of low-energy laser irradiation (685 nm, 35 mW) on the ATPase activity of the different forms of the Na,K-ATPase. METHODS: Membrane-bound and solubilized (alphabeta)(2) form of Na,K-ATPase was obtained from the dark red outer medulla of the kidney and proteoliposomes of DPPC:DPPE and Na,K-ATPase was prepared by the co-solubilization method. Irradiations were carried out at 685 nm using an InGaAIP diode laser. RESULTS: The ATPase activity of the membrane fraction was not altered with exposition to irradiation doses between 4 and 24 J/cm(2). However, with irradiation doses ranging from 32 to 40 J/cm(2), a 28% increase on the ATPase activity was observed while when using up to 50 J/cm(2) no additional enhancement was observed. When biostimulation was done using the solubilized and purified enzyme or the DPPC:DPPE-liposome reconstituted enzyme, an increase of about 36-40% on the ATPase activity was observed using only 4-8 J/cm(2). With irradiation above these values (24 J/cm(2)) no additional increase in the activity was observed. These studies revealed that the biostimulation of ATPase activity from different forms of the Na,K-ATPase is dose dependent in different ranges of irradiation exposure. The stimulation promoted by visible laser doses was modulated and the process was reverted after 2 h for the enzyme present in the membrane and after about 5 h for the solubilized or the reconstituted in DPPC:DPPE-liposomes.     

Lanthanide luminescent anion sensing: evidence of multiple anion recognition through hydrogen bonding and metal ion coordination

The delayed lanthanide luminescence of the terbium [Tb(III)] diaryl-urea complex 1xTb is significantly enhanced upon sensing of dihydrogenphosphate (H2PO4(-)) in CH3CN, which occurs through multiple anion binding through hydrogen bonding interactions and potential metal ion coordination to Tb(III).     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

SERS detection of environmental pollutants in humic acid-gold nanoparticle composite materials

Humic acid (HA) solutions provide an unexpected medium for direct fabrication of gold nanoparticles (HA-AuNP) and a clear window for surface-enhanced Raman scattering (SERS) with many potential applications in the ultrasensitive chemical analysis of environmental pollutants. It is demonstrated that the HA-AuNP fabrication can be easily achieved in a wide range of pH (2 to 12). The background SERS spectra of HA is relatively weak in absolute intensity, allowing the detection of the enhanced Raman signal from trace amount of contaminants. An in-situ approach is illustrated where the HA-AuNP fabrication is carried out with a HA solution containing the target pollutant. The technique may allow for the direct detection of organic pollutants present in the humic fraction of soil.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Poly(methyl vinyl ether‐alt‐maleic acid)‐Functionalized Porous Silicon Nanoparticles for Enhanced Stability and Cellular Internalization

Currently, developing a stable nanocarrier with high cellular internalization and low toxicity is a key bottleneck in nanomedicine. Here, we have developed a successful method to covalently conjugate poly(methyl vinyl ether‐co‐maleic acid) (PMVE‐MA) copolymer on the surface of (3‐aminopropyl)triethoxysilane‐functionalized thermally carbonized porous silicon nanoparticles (APSTCPSi NPs), forming a surface negatively charged nanovehicle with unique properties. This polymer conjugated NPs could modify surface smoothness, charge, and hydrophilicity of the developed NPs, leading to considerable improvement in the colloidal and plasma stabilities via enhanced suspensibility and charge repulsion. Furthermore, despite the surface negative charge of the polymer‐conjugated NPs, the cellular internalization was increased in both MDA‐MB‐231 and MCF‐7 breast cancer cells. These results provide a proof‐of‐concept evidence that such polymer‐based PSi nanocomposite can be extensively used as a promising candidate for intracellular drug delivery.

     

Friedel–Crafts Reaction of Benzyl Fluorides: Selective Activation of C?F Bonds as Enabled by Hydrogen Bonding

A Friedel–Crafts benzylation of arenes with benzyl fluorides has been developed. The reaction produces 1,1‐diaryl alkanes in good yield under mild conditions without the need for a transition metal or a strong Lewis acid. A mechanism involving activation of the C F bond through hydrogen bonding is proposed. This mode of activation enables the selective reaction of benzylic C F bonds in the presence of other benzylic leaving groups.