Analysis of saccharides in beer samples by flow injection with electrospray mass spectrometry

Saccharides in foods play important roles, as they are essential substrates for fermentation processes. In brewing, the concentration of maltooligosaccharides influences the characteristics of beers and therefore their determination is of great practical interest. Electrospray ionization mass spectrometry (ESI-MS) was applied to identify and characterise maltooligosaccharides in beer samples. The effects due to different cation concentrations and dilution of samples were studied. Furthermore, quantitative analyses of maltooligosaccharides by means of flow-injection ESI-MS (FI/ESI-MS) of 1-microL beer samples (diluted 1000-fold) are described.     

Zinc(II) as an allosteric regulator of liposomal membrane permeability induced by synthetic template-assembled tripodal polypeptides

Three copies of peptide sequences from the peptaibol family, known to affect the permeability of the lipid bilayer of membranes, were connected to tris(2-aminoethyl)amine (TREN), a tripodal metal ion ligand, to prepare functional peptides capable of modifying the permeability of liposomal membranes. Some of the resulting tripodal polypeptide derivatives are very effective in promoting carboxyfluorescein (CF) leakage from CF-loaded unilamellar vesicles composed of a 70:30 phosphatidylcholine/cholesterol blend. The activity of these novel compounds was shown to be tunable upon metal ion coordination of the TREN subunit; the tripodal apopeptide was far more effective than its ZnII complex. Leakage experiments showed that a minimum number of five amino acids per peptide chain is required to form active systems. A mechanism is proposed in which the ZnII ion changes the conformation of the template from extended to globular and thus acts as an allosteric regulator of the activity of the systems. Molecular modeling studies indicate that when the three peptide chains are connected to the template in the extended conformation, the resulting tripodal polypeptide is able to span across the membrane, thus allowing the formation of permeable channels made of a cluster of molecules. The same change of conformation induces, to some extent, fusion of the membranes of different liposomes.     

Specific influence of univalent cations on the ionization of alumina-coated TiO2 particles and on the adsorption of poly(acrylic)acid

A surface counterion titration method was used to monitor the interaction of monovalents cations (Li(+), Na(+), TMA(+)) with the surface of alumina-coated TiO(2) particles in concentrated media at different pH and electrolyte concentrations. This method allows measuring separately the negative and positive contribution to the surface charge. It showed that Cl(-) and TMA(+) are indifferent ions, but Li(+) and Na(+) specifically adsorb on the non-ionized alumina surface sites. The binding sequence of cations is Li(+)>Na(+)>TMA(+) at all ionic strengths investigated and is consistent with the structure-making and structure-breaking model developed a few decades ago. Polyacrylic acid (PAA) previously neutralized with the corresponding hydroxide (LiOH, NaOH, TMAOH) has been adsorbed on the alumina surface at different pH. The polymer counterion has a significant influence on the polymer adsorption. The sequence of the surface coverage as a function of the polymer counterion follows the order Li-PAA > Na-PAA > TMA-PAA. The much higher surface coverage with Li-PAA and Na-PAA compared to TMA-PAA is explained by the specific adsorption of Li-PAA and Na-PAA on the nonionized alumina surface sites, the same way LiCl and NaCl do.     

Fluoropolyethers end‐capped by polar functional groups. III. Kinetics of the reactions of hydroxy‐terminated fluoropolyethers and model fluorinated alcohols with cyclohexyl isocyanate catalyzed by organotin compounds

The kinetics of the dibutyltin dilaurate (DBTDL)‐catalyzed urethane formation reactions of cyclohexyl isocyanate (CHI) with model monofunctional fluorinated alcohols and fluoropolyether diol Z‐DOL H‐1000 of various molecular weights (100–1084 g mol^?1) in different solvents were studied. IR spectroscopy and chemical titration methods were used for measuring the rate of the total NCO disappearance at 30–60 °C. The effects of the reagents and DBTDL catalyst concentrations, the solvent and hydroxyl‐containing compound nature, and the temperature on the reaction rate and mechanism were investigated. Depending on the initial reagent concentration and solvent, the reactions could be well described by zero‐order, first‐order, second‐order, or more complex equations. The reaction mechanism, including the formation of intermediate ternary or binary complexes of reagents with the tin catalyst, could vary with the concentration and solvent and even during the reaction. The results were treated with a rate expression analogous to those used for enzymatic reactions. Under the explored conditions, the rate of the uncatalyzed reaction of fluorinated alcohols with CHI was negligible. Moreover, there was no allophanate formation, nor were there other side reactions, catalysis by urethane in the absence of DBTDL, or a synergetic effect in the presence of the tin catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3771–3795, 2002     

Optimization of the design and operation of FAIMS analyzers

Field asymmetric waveform ion mobility spectrometry (FAIMS) holds significant promise for post-ionization separations in conjunction with mass-spectrometric analyses. However, a limited understanding of fundamentals of FAIMS analyzers has made their design and operation largely an empirical exercise. Recently, we developed an a priori simulation of FAIMS that accounts for both ion diffusion (including anisotropic components) and Coulomb repulsion, and validated it by extensive comparisons with FAIMS/MS data. Here it is corroborated further by FAIMS-only measurements, and applied to explore how key instrumental parameters (analytical gap width and length, waveform frequency and profile, the identity and flow speed of buffer gas) affect FAIMS response. We find that the trade-off between resolution and sensitivity can be managed by varying gap width, RF frequency, and (in certain cases) buffer gas, with equivalent outcome. In particular, the resolving power can be approximately doubled compared to "typical" conditions. Throughput may be increased by either accelerating the gas flow (preferable) or shortening the device, but below certain minimum residence times performance deteriorates. Bisinusoidal and clipped-sinusoidal waveforms have comparable merit, but switching to rectangular waveforms would improve resolution and/or sensitivity. For any waveform profile, the ratio of two between voltages in high and low portions of the cycle produces the best performance.     

Synthesis of a Naphthalimide Functionalized Calix[4]arene; A Host Type Fluorophore for Inclusion Compounds in Organic Medium

This article reports the synthesis and the properties of 5,11,17,23-tetra(t-butyl)-25,27-bis-(ethoxy-1,8-naphthalimide)-26,28-hidroxy-calix[4]arene and the formation of an inclusion compound in organic medium. This functionalized calix[4]arene was conceived as the association of a potential host species with a good fluorophore for optical sensoring purposes. Calix[4]-NI as we will call it, maintains its ‘cone-pinched’ configuration and exhibits typical naphthalimide fluorescence bands in non-polar solvents. Its ability to interact with guest species via hydrogen bonding in its endo-hydrophilic cavity to form inclusion compounds was verified with absorption and fluorescence measurements using N-ethanol-1,8-naphthalimide as guest species, which was projected to fit exactly the host cavity and to interact with its naphthalimide π electrons. For this reason, it was possible to follow the formation of the inclusion compound with electronic spectroscopy.     

Extraction of humic acids from a natural matrix by alkaline pyrophosphate. Evaluation of the molecular weight of fractions obtained by ultrafiltration

 Fractions of humic acids, resolved by ultrafiltration of extracts from a sample of peat treated with alkaline pyrophosphate solution, have been submitted to high-performance size-exclusion chromatography, with the aim of determining the molecular weight distributions. Anomalous peaks, located at retention volumes higher than those corresponding to the main signal, are present in the elution profiles relative to the lightest fractions. These peaks are more intense when using a refractive index detector rather than a UV detector. Elemental analysis data for the lightest fractions suggested that the spurious peaks are due to the presence of inorganic material. The hypothesis that pyrophosphate interacts with humic acids in the course of the extraction has been confirmed by colorimetric determination of the phosphorus content in the different fractions. As a consequence, the extraction procedure has been modified by using 0.1 mol/L NaOH as extractant. The average molecular weights of the various fractions, following NaOH extraction, result in substantial agreement with those obtained following pyrophosphate solution extraction (if the ‘pyrophosphate peaks’ present in the chromatographic profile are discarded in the calculations). Received: 18 November 1996 / Revised: 18 February 1997 / Accepted: 23 February 1997     

Can the pi-facial selectivity of solvation be predicted by atomistic simulation?

This work is concerned with the rationalization and prediction of solvent and temperature effects in nucleophilic addition to alpha-chiral carbonyl compounds leading to facial diastereoselectivity. We study, using molecular dynamics simulations, the facial solvation of (R)-2-phenyl-propionaldehyde in n-pentane and n-octane at a number of temperatures and compare it with experimental selectivity data for the nBuLi addition leading to syn- and anti-(2R)-2-phenyl-3-heptanol, which give nonlinear Eyring plots with the presence of inversion temperatures. We have found from simulations that the facial solvation changes with temperature and alkane. Moreover, by introducing a suitable molecular chirality index we have been able to predict break temperatures (T(CI)) for the two solvents within less than 20 degrees of the inversion temperatures experimentally observed in the diastereoselective nBuLi addition. We believe this could lead to a viable approach for predicting inversion temperatures and other subtle solvent effects in a number of stereoselective reactions.     

Complexes self‐associate by hydrogen bonding and metallophilic attraction: Theoretical study

Hydrogen bonding and metallophilic attractions are studied in the model systems: [(AuNH₃Cl)₂], [(AuNH(CH₃)₂Cl)₂], [{Au₂(μ‐SH)(PH₂O)(PH₂OH)}₂], [(CuNH₃Cl)₂], and [{Cu(NH₃)Cl}₄] at the Hartree–Fock (HF) and second‐order Møller–Plesset (MP2) levels. The two interactions are found to be comparable and prevailing in the final structure. It is determined that the aurophilic contact has a same magnitude that the hydrogen bonding, and is stronger than the cuprophilic interaction. The presence of hydrogen bond directs the growth of the crystal. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Practical aspects of carbon content determination in carburized steels by EPMA.

The carbon contents in carburized steels were investigated by electron probe microanalysis (EPMA) for a range of carbon levels in the solid solution less than 1 wt%. This article describes the difficulties encountered with the classic analytical procedure using the k ratio of X-ray intensities and the phi(rhoz) model. Here, a suitable calibration curve method is presented with emphasis on the metallographic study of standard specimens and on the carbon decontamination of samples.