Electrochemically switchable hydrogen-bonded molecular shuttles

A series of [2]rotaxanes containing succinamide and naphthalimide hydrogen-bonding stations for a benzylic amide macrocycle is described. Electrochemical reduction and oxidation of the naphthalimide group alters its ability to form hydrogen bonds to the macrocycle to such a degree that redox processes can be used to switch the relative macrocycle-binding affinities of the two stations in a rotaxane by over 8 orders of magnitude. The structure of the neutral [2]rotaxane in solution is established by (1)H NMR spectroscopy and shows that the macrocycle exhibits remarkable positional integrity for the succinamide station in a variety of solvents. Cyclic voltammetry experiments allow the simultaneous stimulation and observation of a redox-induced dynamic process in the rotaxane which is both reversible and cyclable. Model compounds in which various conformational and co-conformational changes are prohibited demonstrate unequivocally that the redox response is the result of shuttling of the macrocycle between the two stations. At room temperature in tetrahydrofuran the electrochemically induced movement of the macrocycle between the two stations takes approximately 50 micros.     

Considerations on the modelling and optimisation of resolution of ionisable compounds in extended pH-range columns

The problems associated to the modelling and optimisation of the chromatographic resolution of mixtures involving ionisable solutes at varying pH and acetonitrile content are discussed. Several retention models that separate the contributions of solute, column and stationary phase, were used. The retention was predicted with low errors in large pH domains (2-12), which was an essential requirement to face the optimisation of resolution. The selected mixture was particularly problematic under the viewpoint of resolution, owing to the excessively diverse acid-base behaviour of solutes. This variety led to sudden drops in retention at different pH for each solute, yielding numerous peak crossing, which made finding shared regions of high resolution especially difficult. Conventional resolution diagrams for these situations are scarcely informative, since both the overall and the worst elementary resolutions drop to zero if at least two compounds remain overlapped, even when all the others are baseline resolved. A new chromatographic objective function is proposed to address this drawback. This function, called "limiting peak count", is based on the limiting peak purity concept, and measures the success in the resolution focusing on the resolved solutes, in contrast to conventional resolution assessments that attend mainly to the least resolved solutes. Limiting peak count yields the same result as conventional assessments when full resolution is possible, but it is also able to discriminate the maximal resolving power in low-resolution situations. It offers a different perspective to that given by the complementary mobile phases approach, and the computation is far simpler.     

Retention of ionizable compounds on HPLC. Modelling retention for neutral and ionizable compounds by linear solvation energy relationships

Summary A global LSER model that relates HPLC retention to mobile phase composition and pH is tested for a varied group of solutes, both neutral and ionizable, in a polymeric column and methanol-water mobile phases. It is compared to the local LSER model developed only for a given mobile phase, i.e., a fixed organic modifier content, and to the global LSER model set only for neutral solutes. The global LSER model for neutral and ionizable solutes requires a few supplementary parameters over the other models tested, but it accounts for retention under any experimental conditions for a given column and methanol-water mobile phases, describing properly the interactions established in the HPLC system (hydrophobicity, hydrogen-bond acidity and basicity, dipolarity/polarizability…). This paper is number 13 of a series with the same general title: “Retention of Ionizable Compounds on HPLC” published in various journals.     

Surprising Homolytic Gas Phase Co−C Bond Dissociation Energies of Organometallic Aryl-Cobinamides Reveal Notable Non-Bonded Intramolecular Interactions

Aryl-cobalamins are a new class of organometallic structural mimics of vitamin B₁₂ designed as potential ‘antivitamins B₁₂’. Here, the first cationic aryl-cobinamides are described, which were synthesized using the newly developed diaryl-iodonium method. The aryl-cobinamides were obtained as pairs of organometallic coordination isomers, the stereo-structure of which was unambiguously assigned based on homo- and heteronuclear NMR spectra. The availability of isomers with axial attachment of the aryl group, either at the ‘beta’ or at the ‘alpha’ face of the cobalt-center allowed for an unprecedented comparison of the organometallic reactivity of such pairs. The homolytic gas-phase bond dissociation energies (BDEs) of the coordination-isomeric phenyl- and 4-ethylphenyl-cobinamides were determined by ESI-MS threshold CID experiments, furnishing (Co−C )-BDEs of 38.4 and 40.6 kcal mol⁻¹, respectively, for the two β-isomers, and the larger BDEs of 46.6 and 43.8 kcal mol⁻¹ for the corresponding α-isomers. Surprisingly, the observed (Co−C )-BDEs of the Co_β-aryl-cobinamides were smaller than the (Co−C )-BDE of Co_β-methyl-cobinamide. DFT studies and the magnitudes of the experimental (Co−C )-BDEs revealed relevant contributions of non-bonded interactions in aryl-cobinamides, notably steric strain between the aryl and the cobalt-corrin moieties and non-bonded interactions with and among the peripheral sidechains.     

Evaluation of the interelemental effect in X-ray fluorescence analysis by the total addition method

Summary An algorithm for quantifying interelemental effects in X-ray fluorescence techniques is developed. By applying an addition process, the ratio between the mass absorption coefficients of the analyte and the unknown sample ( _i ^* / _s ^* ) is calculated to correct the fluorescence intensity of the element to be determined and linearize the I-c calibration plot. This coefficient can be calculated graphically and numerically. The method is applied to the determination of tin in lead alloys with good results over wide concentration ranges.Notation used Q Constant of proportionality in Eq. (4) X-ray fluorescence intensity of the I _i ^o standard - I _i ^s unknown sample - I _i ^ns dilute unknown sample - I _i ^ms unknown sample after addition of i analyte Corrected fluorescence intensity of the I _i ^cs unknown sample - I _i ^msc unknown sample after addition of i analyte Relationship of fluorescence intensity between R_i sample and standard - R _i dilute sample and standard Factor of f_m addition - f_x addition equivalent to the mass fraction of the i analyte in the unknown sample Mass absorption coefficient of _i ^* analyte - _s ^* unknown sample - _ms ^* unknown sample after addition Mass fraction of c _i ^s analyte - c _i ^ms unknown sample after addition     

The diazo route to diazonamide A: studies on the tyrosine-derived fragment

Various approaches to the tyrosine-derived fragment of the marine secondary metabolite diazonamide A are described. Initial efforts were focused on the originally proposed structure of the natural product, and a feasibility study established that a model 4-aryltryptamine could be readily prepared. Protected 4-bromotryptamine underwent Pd0-catalyzed coupling with the boronic acid derived from 2-bromophenyl allyl ether by Claisen rearrangement, O-methylation and lithiation-boration. The resulting biaryl was elaborated into an alpha-diazo-beta-ketoester, dirhodium(II)-catalyzed reaction of which with N-Z-valinamide gave the desired tryptamine-oxazole following cyclodehydration of the intermediate ketoamide. A potential precursor to the benzofuran ring of the original structure of diazonamide A was prepared in eight steps from N-Z-tyrosine tert-butyl ester. Iodination, O-protection and Stille coupling gave the cinnamyl alcohol 25, converted via the bromide into the allyl aryl ether 27. Subsequent Claisen rearrangement and oxidative cleavage of the alkene gave the lactol 29, converted into the desired benzofuranone 31. The revision in the structure of diazonamide A to 2 resulted in the targeting of an alternative tyrosine-derived model benzofuranone 41 synthesized in four steps from N-Z-tyrosine methyl ester 36 by a route involving Claisen rearrangement of cinnamyl ether 37. Poor yields in this sequence prompted an investigation into the intramolecular Heck reaction as a route to benzofuranone 50. Coupling of 3-iodotyrosine 44 with 2-phenylbutenoic acid 48 gave ester 49 that readily underwent intramolecular Heck reaction to give benzofuranone 50, albeit with poor stereocontrol.     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Simultaneous determination of iron, cobalt, nickel and copper by UV-visible spectrophotometry with multivariate calibration

A method for the simultaneous spectrophotometric determination of the divalent ions of iron, cobalt, nickel and copper based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide (DPTH) is proposed. The resolution of quaternary mixtures of these metallic ions was accomplished by several chemometric approaches. A comparative study of the results obtained for simultaneous determinations in mixture by using principal component regression (PCR) and partial least-squares regression (PLS-1 and PLS-2) for absorbance, first-derivative and second-derivative data is presented. In general, the best recovery values are obtained by the PLS-2 method for absorbance data. This procedure allows the simultaneous determination of the cited ions in alloys and biological materials Good reliability of the determination was proved.     

Application of sol-gel process to H-zeolite synthesis over amorphous aluminosilicate materials

The impregnation preparation of H-zeolite over amorphous aluminosilicate solids (cracking catalysts) is compared with new synthesis procedures based on sol-gel process. The characterization results show that the H-zeolite reacts with the intermediates of the amorphous aluminosilicate.

---

H- ( ) , -. , H- .

     

Detection of genetically modified corn (Bt176) in spiked cow blood samples by polymerase chain reaction and immunoassay methods

The fate of DNA and protein transgenic sequences in products derived from animals fed transgenic crops has recently raised public interest. Sensitive molecular tests targeting the Bt176 genetic construct and the transgenic Cry1Ab protein were developed to determine whether plant sequences, especially transgenic sequences, are present in animal products. A protocol for total DNA extraction and purification from cow whole blood samples was first drawn up and assessed by spiking with known amounts of DNA from Bt176 maize. The limit of detection for transgenic sequences (35S promoter and Bt176-specific junction sequence) was determined by both the polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA) and the 5'-nuclease PCR assay. Four additional PCR systems were built to substantiate the results. The first detects a mono-copy maize-specific sequence (ADH promoter). Two others target multi-copy sequences from plant nucleus (26S rRNA gene) and chloroplast (psaB gene). The last one, used as a positive control, targets a mono-copy animal sequence (alpha(s1)-casein gene). Both methods detected a minimum spiking at 25 copies of Bt176 maize/mL in 10 mL whole blood samples. The sandwich ELISA kit used detected down to 1 ng transgenic Cry1Ab protein/mL spiked whole blood.