Triterpene glycosides from the sea cucumber Eupentacta fraudatrix. Structure and biological action of cucumariosides A1, A3, A4, A5, A6, A12 and A15, seven new minor non-sulfated tetraosides and unprecedented 25-keto, 27-norholostane aglycone

Seven new minor triterpene glycosides, cucumariosides A1 (1), A3 (2), A4 (3), A5 (4), A6 (5), A12 (6) and A15 (7) have been isolated from the Far Eastern sea cucumber Eupentacta fraudatrix. Structures of the glycosides were elucidated by 2D NMR spectroscopy and MS. Glycosides 1-7 belong to the group of cucumariosides A, having linear tetrasaccharide carbohydrate moieties without any sulfate group and possessing 3-O-methyl-D-xylose as a terminal monosaccharide unit. The latter peculiarity is rare in sea cucumber glycosides, but typical for the glycosides from E. fraudatrix. Glycosides 1-7 differ from each other by side chain structures in the aglycone moieties; three of them have unique structural features. The first is the presence of a 25-butoxy-group in the side chain of cucumarioside A3 (2), the second is a 23E,25-diene system in cucumarioside A6 (5) and the third is a 25-keto-27-nor-holostane aglycone in cucumarioside A12 (6); these were never previously found in sea cucumber glycosides. Cytotoxic activity of glycosides 1-7 against mouse spleen lymphocytes and the cells of the ascite form of mouse Ehrlich carcinoma, along with hemolytic activity against mouse erythrocytes and antifungal activity were studied. Glycosides 1 and 5 were the most active in all the tests.     

Secondary metabolites produced by fungi derived from a microbial mat encountered in an iron-rich natural spring

A collection of fungal isolates was obtained from a complex microbial mat, which occupied an iron-rich freshwater spring that feeds into Clear Creek, Golden, Colorado, USA. Two of the fungal isolates, a Glomeromycete (possibly Entrophospora sp.) and a Dothideomycete (possibly Phaeosphaeria sp.), were investigated for bioactive secondary metabolites. In total, six new compounds consisting of clearanols A-E (5, 6, 10-12) and disulochrin (7) were purified and their structures were determined. Disulochrin exhibited modest antibacterial activity against methicillin-resistant Staphylococcus aureus, whereas clearanol C showed weak inhibitory activity against Candida albicans biofilm formation.     

Synthetic routes to [Au(NHC)(OH)] (NHC = N-heterocyclic carbene) complexes

New procedures for the synthesis of [Au(NHC)(OH)] are reported. Initially, a two-step reaction via the digold complex [{Au(NHC)}(2)(μ-OH)][BF(4)] was probed, enabling the preparation of the novel [Au(SIPr)(OH)] complex and of its previously reported congener [Au(IPr)(OH)]. After further optimization, a one-step procedure was developed.     

Influence of surface-attachment functionality on the aggregation, persistence, and electron-transfer reactivity of chalcogenorhodamine dyes on TiO2

Chalcogenorhodamine dyes bearing phosphonic acids and carboxylic acids were compared as sensitizers of nanocrystalline TiO(2) in dye-sensitized solar cells (DSSCs). The dyes were constructed around a 3,6-bis(dimethylamino)chalcogenoxanthylium core and varied in the 9 substituent: 5-carboxythien-2-yl in dyes 1-E (E = O, Se), 4-carboxyphenyl in dyes 2-E (E = O, S), 5-phosphonothien-2-yl in dyes 3-E (E = O, Se), and 4-phosphonophenyl in dyes 4-E (E = O, Se). All dyes adsorbed to TiO(2) as mixtures of H aggregates and monomers, which exhibited broadened absorption spectra relative to those of purely amorphous monolayers. Surface coverages of dyes and the extent of H aggregation varied minimally with the surface-attachment functionality, the structure of the 9-aryl group, and the identity of the chalcogen heteroatom. Carboxylic acid-functionalized dyes 1-E and 2-E desorbed rapidly and completely from TiO(2) into acidified CH(3)CN, but phosphonic acid-functionalized dyes 3-E and 4-E persisted on TiO(2) for days. Short-circuit photocurrent action spectra of DSSCs corresponded closely to the absorptance spectra of dye-functionalized films; thus, H aggregation did not decrease the electron-injection yield or charge-collection efficiency. Maximum monochromatic incident photon-to-current efficiencies (IPCEs) of DSSCs ranged from 53 to 95% and were slightly higher for carboxylic acid-functionalized dyes 1-E and 2-E. Power-conversion efficiencies of DSSCs under white-light illumination were low (<1%), suggesting that dye regeneration was inefficient at high light intensities. The photoelectrochemical performance (under monochromatic or white-light illumination) of 1-E and 2-E decayed significantly within 20-80 min of the assembly of DSSCs, primarily because of the desorption of the dyes. In contrast, the performance of phosphonic acid-functionalized dyes remained stable or improved slightly on similar timescales. Thus, replacing carboxylic acids with phosphonic acids increased the inertness of chalcogenorhodamine-TiO(2) interfaces without greatly impacting the aggregation of dyes or the interfacial electron-transfer reactivity.     

Ordering in Bio-Polyelectrolyte Chitosan Solutions

The scaling of the polyelectrolyte scattering peak in chitosan solutions, as deduced from the relation q_max∼c_p^α was studied by synchrotron SAXS as a function of the charge density of the polymer. We observe a variation in the α exponent corresponding to the limit of the ionic condensation, by varying the degree of acetylation of the polymer. The nature of the solution medium also affects the polyelectrolyte peak, and it is shown that in alcoholic/water mixtures, the lower dissociation of the acid induces a lower charge density, thus influencing the polyelectrolyte ordering.     

Selective detection of unknown organic bromine compounds and quantification potentiality by negative-ion electrospray ionization mass spectrometry with induced in-source fragmentation

For the detection of unknown organic bromine compounds, a liquid chromatography–mass spectrometry (LC-MS) method with negative-ion electrospray ionization (NI-ESI) and induced in-source fragmentation (IISF) was established. After LC separation, the molecules are fragmentized in the source, and bromide is detected via m/z 79 and m/z 81 based on the isotopic occurrence of bromine. In this way, the retention times of the unknown organobromine compounds are determined, and this can be used to extract additional structural information (number of bound bromine atoms, molecular mass and fragmentation scheme) from measurements in the commonly used but less sensitive scan mode. The analysis of known organobromine compounds shows that LC/NI-ESI-IISF mass spectrometry with detection of m/z 79 and 81 is more sensitive than the detection of daughter ions (LC/ESI/MS-MS). Therefore, we present a method not only for the detection of unknown organic bromine compounds, but also for the selective and sensitive detection and quantification of known organobromine compounds.     

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.     

Fluorine in Peptides: The Synthesis of α‐Fluoro‐β‐Amino Dipeptides by Direct Deoxofluorination/Rearrangement of N‐Seryl Dipeptides

This article describes the stereo‐ and regioselectivity of the deoxofluorination of N‐terminal dipeptides bearing a serine residue to generate, after rearrangement, α‐fluoro‐β‐amine‐terminated dipeptides. The ratio of the rearranged α‐fluorinated regioisomer is increased, relative to the non‐rearranged β‐fluoro isomer, with N‐alkylated amides. Otherwise, an intramolecular H‐bond between the free amine and the amide NH suppresses formation of the key aziridinium intermediate required for α‐fluorination. N‐Methyl and N‐allyl amides give exclusively α‐fluorination products. Subsequent deprotection of the N‐allyl amide to give a α‐fluoro‐β‐amino dipeptide product is demonstrated.     

Preparation of glycopolymer‐coated magnetite nanoparticles for hyperthermia treatment

In this article, magnetite nanoparticles (MNPs) coated with glycopolymer bearing glucose moieties were designed with optimal structural, colloidal, and magnetic properties for biomedical applications. MNPs with an average size of 17 ± 2 nm were synthesized by thermal decomposition process and then their surfaces were modified with active vinyl groups. Two different monomers were immobilized onto the surfaces: dopamine methacrylamide, a monomer with properties inspired on mussels adhesive capacity, or unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]‐oxy}ethyl methacrylate. Afterward, the glycomonomer were polymerized at the interface of both vinyl functionalized MNPs by conventional radical polymerization. The resultant hybrid NPs were water dispersible presenting good stability in aqueous solution for long time periods. Moreover, the high density of carbohydrates at the surface of the magnetic NPs could confer targeting properties to the system as demonstrated by studies of their binding interactions with lectins, where the binding activity is higher as the glycopolymer content augments. The magnetic and magneto‐thermal properties of the synthesized hybrid NPs were evaluated. The magnetization curves reveal superparamagnetic features at 300 K, with high values of saturation magnetization. Furthermore, the hybrid glycoparticles show suitable heat dissipation power when exposed to alternating magnetic field conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012