Selective detection of unknown organic bromine compounds and quantification potentiality by negative-ion electrospray ionization mass spectrometry with induced in-source fragmentation

For the detection of unknown organic bromine compounds, a liquid chromatography–mass spectrometry (LC-MS) method with negative-ion electrospray ionization (NI-ESI) and induced in-source fragmentation (IISF) was established. After LC separation, the molecules are fragmentized in the source, and bromide is detected via m/z 79 and m/z 81 based on the isotopic occurrence of bromine. In this way, the retention times of the unknown organobromine compounds are determined, and this can be used to extract additional structural information (number of bound bromine atoms, molecular mass and fragmentation scheme) from measurements in the commonly used but less sensitive scan mode. The analysis of known organobromine compounds shows that LC/NI-ESI-IISF mass spectrometry with detection of m/z 79 and 81 is more sensitive than the detection of daughter ions (LC/ESI/MS-MS). Therefore, we present a method not only for the detection of unknown organic bromine compounds, but also for the selective and sensitive detection and quantification of known organobromine compounds.     

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.     

Fluorine in Peptides: The Synthesis of α‐Fluoro‐β‐Amino Dipeptides by Direct Deoxofluorination/Rearrangement of N‐Seryl Dipeptides

This article describes the stereo‐ and regioselectivity of the deoxofluorination of N‐terminal dipeptides bearing a serine residue to generate, after rearrangement, α‐fluoro‐β‐amine‐terminated dipeptides. The ratio of the rearranged α‐fluorinated regioisomer is increased, relative to the non‐rearranged β‐fluoro isomer, with N‐alkylated amides. Otherwise, an intramolecular H‐bond between the free amine and the amide NH suppresses formation of the key aziridinium intermediate required for α‐fluorination. N‐Methyl and N‐allyl amides give exclusively α‐fluorination products. Subsequent deprotection of the N‐allyl amide to give a α‐fluoro‐β‐amino dipeptide product is demonstrated.     

Preparation of glycopolymer‐coated magnetite nanoparticles for hyperthermia treatment

In this article, magnetite nanoparticles (MNPs) coated with glycopolymer bearing glucose moieties were designed with optimal structural, colloidal, and magnetic properties for biomedical applications. MNPs with an average size of 17 ± 2 nm were synthesized by thermal decomposition process and then their surfaces were modified with active vinyl groups. Two different monomers were immobilized onto the surfaces: dopamine methacrylamide, a monomer with properties inspired on mussels adhesive capacity, or unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]‐oxy}ethyl methacrylate. Afterward, the glycomonomer were polymerized at the interface of both vinyl functionalized MNPs by conventional radical polymerization. The resultant hybrid NPs were water dispersible presenting good stability in aqueous solution for long time periods. Moreover, the high density of carbohydrates at the surface of the magnetic NPs could confer targeting properties to the system as demonstrated by studies of their binding interactions with lectins, where the binding activity is higher as the glycopolymer content augments. The magnetic and magneto‐thermal properties of the synthesized hybrid NPs were evaluated. The magnetization curves reveal superparamagnetic features at 300 K, with high values of saturation magnetization. Furthermore, the hybrid glycoparticles show suitable heat dissipation power when exposed to alternating magnetic field conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

General one-pot, three-step methodology leading to an extended class of N-heterocyclic cations: spontaneous nucleophilic addition, cyclization, and hydride loss

A new class of phenanthridinium derivative has been isolated from the reaction of 2-bromoethyl-phenanthridinium bromide with a range of primary amines in excellent yields. The reaction pathway is unprecedented and proceeds via three cascade steps: nucleophilic attack of a primary amine on the iminium moiety of a heteroaromatic ring system and cyclization to form a five-membered ring, followed by hydride loss to yield a rearomatized dihydro-1H-imidazo[1,2-f]phenanthridinium derivative. A range of NMR phase transfer experiments were carried out to elucidate the mechanistic pathway, and the methodology has been further developed by means of a biphasic system using N-bromosuccinimide as a co-oxidizing agent. The method has also been extended to other N-heterocyclic cation derivatives such as quinolinium and quinazolinium.     

Ethylene tetramerization: a new route to produce 1-octene in exceptionally high selectivities

Linear alpha-olefins, such as 1-hexene and 1-octene, are important comonomers in the production of linear low-density polyethylene (LLDPE). The conventional method of producing 1-hexene and 1-octene is by oligomerization of ethylene, which yields a wide spectrum of linear alpha-olefins (LAOs). While there exists several processes for producing 1-hexene via ethylene trimerization, a similar route for the selective production of 1-octene has so far been elusive. We now, for the first time, report an unprecedented ethylene tetramerization reaction that produces 1-octene in selectivities exceeding 70%, using an aluminoxane-activated chromium/((R2)2P)2NR1 catalyst system.     

Synthesis and conformational studies of palladium(II) complexes containing [PhP(O)NP(E)Ph]− (E=S or Se)

The ligands [Ph₂P(O)NP(E)Ph₂]⁻ (E=S I; E=Se II) can readily be complexed to a range of palladium(II) starting materials affording new six-membered Pd–O–P–N–P–E palladacycles. Hence ligand substitution reaction of the chloride complexes [PdCl₂(bipy)] (bipy=2,2′-bipyridine), [{Pd(μ-Cl)(L–L)}₂] (HL–L=C₉H₁₃N or C₁₂H₁₃N), [{Pd(μ-Cl)Cl(PMe₂Ph)}₂] or [PdCl₂(PR₃)₂] [PR₃=PPh₃; 2PR₃=Ph₂PCH₂CH₂PPh₂or cis-Ph₂PCH=CHPPh₂] with either I (or II) in thf or CH₃OH gave [Pd{Ph₂P(O)NP(E)Ph₂-O,E}(bipy)]PF₆, [Pd{Ph₂P(O)NP(E)Ph₂-O,E}(L–L)], [Pd{Ph₂P(O)NP(E)Ph₂-O,E}Cl(PMe₂Ph)] or [Pd{Ph₂P(O)NP(E)Ph₂-O,E} (PR₃)₂]PF₆ in good yields. All compounds described have been characterised by a combination of multinuclear NMR [31 P{1 H} and 1 H] and IR spectroscopy and microanalysis. The molecular structures of five complexes containing the selenium ligand II have been determined by single-crystal X-ray crystallography. Three different ring conformations were observed, a pseudo-butterfly, hinge and in the case of all three PR₃ complexes, pseudo-boat conformations. Within the Pd–O–P–N–P–Se rings there is evidence for π-electron delocalisation.     

Detection of genetically modified corn (Bt176) in spiked cow blood samples by polymerase chain reaction and immunoassay methods

The fate of DNA and protein transgenic sequences in products derived from animals fed transgenic crops has recently raised public interest. Sensitive molecular tests targeting the Bt176 genetic construct and the transgenic Cry1Ab protein were developed to determine whether plant sequences, especially transgenic sequences, are present in animal products. A protocol for total DNA extraction and purification from cow whole blood samples was first drawn up and assessed by spiking with known amounts of DNA from Bt176 maize. The limit of detection for transgenic sequences (35S promoter and Bt176-specific junction sequence) was determined by both the polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA) and the 5'-nuclease PCR assay. Four additional PCR systems were built to substantiate the results. The first detects a mono-copy maize-specific sequence (ADH promoter). Two others target multi-copy sequences from plant nucleus (26S rRNA gene) and chloroplast (psaB gene). The last one, used as a positive control, targets a mono-copy animal sequence (alpha(s1)-casein gene). Both methods detected a minimum spiking at 25 copies of Bt176 maize/mL in 10 mL whole blood samples. The sandwich ELISA kit used detected down to 1 ng transgenic Cry1Ab protein/mL spiked whole blood.     

Bipolar Mass Spectrometry of Labile Coordination Complexes, Redox Active Inorganic Compounds, and Proteins Using a Glass Nebulizer for Sonic-Spray Ionization

In this study, we report on the development of a novel nebulizer configuration for sonic-spray ionization (SSI) mass spectrometry (MS), more specifically for a version of SSI that is referred to as Venturi easy ambient sonic-spray ionization (V-EASI) MS. The developed nebulizer configuration is based on a commercially available pneumatic glass nebulizer that has been used extensively for aerosol formation in atomic spectrometry. In the present study, the nebulizer was modified in order to achieve efficient V-EASI-MS operation. Upon evaluating this system, it has been demonstrated that V-EASI-MS offers some distinct advantages for the analysis of coordination compounds and redox active inorganic compounds over the predominantly used electrospray ionization (ESI) technique. Such advantages, for this type of compounds, are demonstrated here for the first time. More specifically, a series of labile heptanuclear heterometallic [Cu^II ₆Ln^III] clusters held together with artificial amino acid ligands, in addition to easily oxidized inorganic oxyanions of selenium and arsenic, were analyzed. The observed advantages pertain to V-EASI appearing to be a “milder” ionization source than ESI, not requiring electrical potentials for gas phase ion formation, thus eliminating the possibility of unwanted redox transformations, allowing for the “simultaneous” detection of negative and positive ions (bipolar analysis) without the need to change source ionization conditions, and also not requiring the use of syringes and delivery pumps. Because of such features, especially because of the absence of ionization potentials, EASI can be operated with minimal requirements for source parameter optimization. We observed that source temperature and accelerating voltage do not seem to affect labile compounds to the extent they do in ESI-MS. In addition, bipolar analysis of proteins was demonstrated here by acquiring both positive and negative ion mass spectra from the same protein solutions, without the need to independently adjust solution and source conditions in each mode. Finally, the simple and efficient operation of a dual-nebulizer configuration was demonstrated for V-EASI-MS for the first time.

Preparation and characterization of 5,10,15,20‐tetraphenylporphyrin Langmuir films for gas chemsensor applications

In this work is reported the preparation and characterization of 5,10,15,20‐tetraphenylporphyrin (H₂TPP) films at the water‐air interfaces. The surface pressure‐area isotherms (π‐A) and UV‐Vis spectroscopy were used to investigate the effect of the spreading methods and parameters on the porphyrin monolayer formation. Also, Langmuir‐Blodgett (LB) and Langmuir‐Schaefer (LS) films were deposited onto glass substrates in order to study the conformation changes in porphyrin molecular packing. Quartz crystal microbalance (QCM) was utilized as the active solid substrate for the development of the NO₂ gas sensor based on the H₂TPP molecular films. The results of π‐A curves have clearly shown the significant contribution of the preparation methods and processing parameters on the conformation of porphyrin molecular films. The UV‐Vis spectroscopy results using polarized absorption dichroism have indicated different molecular packing for porphyrin films deposited by LB and LS methods, with relative tilted angles of 50° ± 5° and 35° ± 5°, respectively. Moreover, the QCM response has given strong evidence that H₂TPP porphyrin molecular films have performed as NO₂ chemsensor. Copyright © 2011 John Wiley & Sons, Ltd.