Full dimension Rb2He ground triplet potential energy surface and quantum scattering calculations

We have developed a three-dimensional potential energy surface for the lowest triplet state of the Rb(2)He complex. A global analytic fit is provided as in the supplementary material [see supplementary material at http://dx.doi.org/10.1063/1.4709433 for the corresponding Fortran code]. This surface is used to perform quantum scattering calculations of (4)He and (3)He colliding with (87)Rb(2) in the partial wave J = 0 at low and ultralow energies. For the heavier helium isotope, the computed vibrational relaxation probabilities show a broad and strong shape resonance for a collisional energy of 0.15 K and a narrow Feshbach resonance at about 17 K for all initial Rb(2) vibrational states studied. The broad resonance corresponds to an efficient relaxation mechanism that does not occur when (3)He is the colliding partner. The Feshbach resonance observed at higher collisional energy is robust with respect to the isotopic substitution. However, its effect on the vibrational relaxation mechanism is faint for both isotopes.     

Synthetic routes to [Au(NHC)(OH)] (NHC = N-heterocyclic carbene) complexes

New procedures for the synthesis of [Au(NHC)(OH)] are reported. Initially, a two-step reaction via the digold complex [{Au(NHC)}(2)(μ-OH)][BF(4)] was probed, enabling the preparation of the novel [Au(SIPr)(OH)] complex and of its previously reported congener [Au(IPr)(OH)]. After further optimization, a one-step procedure was developed.     

Influence of surface-attachment functionality on the aggregation, persistence, and electron-transfer reactivity of chalcogenorhodamine dyes on TiO2

Chalcogenorhodamine dyes bearing phosphonic acids and carboxylic acids were compared as sensitizers of nanocrystalline TiO(2) in dye-sensitized solar cells (DSSCs). The dyes were constructed around a 3,6-bis(dimethylamino)chalcogenoxanthylium core and varied in the 9 substituent: 5-carboxythien-2-yl in dyes 1-E (E = O, Se), 4-carboxyphenyl in dyes 2-E (E = O, S), 5-phosphonothien-2-yl in dyes 3-E (E = O, Se), and 4-phosphonophenyl in dyes 4-E (E = O, Se). All dyes adsorbed to TiO(2) as mixtures of H aggregates and monomers, which exhibited broadened absorption spectra relative to those of purely amorphous monolayers. Surface coverages of dyes and the extent of H aggregation varied minimally with the surface-attachment functionality, the structure of the 9-aryl group, and the identity of the chalcogen heteroatom. Carboxylic acid-functionalized dyes 1-E and 2-E desorbed rapidly and completely from TiO(2) into acidified CH(3)CN, but phosphonic acid-functionalized dyes 3-E and 4-E persisted on TiO(2) for days. Short-circuit photocurrent action spectra of DSSCs corresponded closely to the absorptance spectra of dye-functionalized films; thus, H aggregation did not decrease the electron-injection yield or charge-collection efficiency. Maximum monochromatic incident photon-to-current efficiencies (IPCEs) of DSSCs ranged from 53 to 95% and were slightly higher for carboxylic acid-functionalized dyes 1-E and 2-E. Power-conversion efficiencies of DSSCs under white-light illumination were low (<1%), suggesting that dye regeneration was inefficient at high light intensities. The photoelectrochemical performance (under monochromatic or white-light illumination) of 1-E and 2-E decayed significantly within 20-80 min of the assembly of DSSCs, primarily because of the desorption of the dyes. In contrast, the performance of phosphonic acid-functionalized dyes remained stable or improved slightly on similar timescales. Thus, replacing carboxylic acids with phosphonic acids increased the inertness of chalcogenorhodamine-TiO(2) interfaces without greatly impacting the aggregation of dyes or the interfacial electron-transfer reactivity.     

Synthesis and conformational studies of palladium(II) complexes containing [PhP(O)NP(E)Ph]− (E=S or Se)

The ligands [Ph₂P(O)NP(E)Ph₂]⁻ (E=S I; E=Se II) can readily be complexed to a range of palladium(II) starting materials affording new six-membered Pd–O–P–N–P–E palladacycles. Hence ligand substitution reaction of the chloride complexes [PdCl₂(bipy)] (bipy=2,2′-bipyridine), [{Pd(μ-Cl)(L–L)}₂] (HL–L=C₉H₁₃N or C₁₂H₁₃N), [{Pd(μ-Cl)Cl(PMe₂Ph)}₂] or [PdCl₂(PR₃)₂] [PR₃=PPh₃; 2PR₃=Ph₂PCH₂CH₂PPh₂or cis-Ph₂PCH=CHPPh₂] with either I (or II) in thf or CH₃OH gave [Pd{Ph₂P(O)NP(E)Ph₂-O,E}(bipy)]PF₆, [Pd{Ph₂P(O)NP(E)Ph₂-O,E}(L–L)], [Pd{Ph₂P(O)NP(E)Ph₂-O,E}Cl(PMe₂Ph)] or [Pd{Ph₂P(O)NP(E)Ph₂-O,E} (PR₃)₂]PF₆ in good yields. All compounds described have been characterised by a combination of multinuclear NMR [31 P{1 H} and 1 H] and IR spectroscopy and microanalysis. The molecular structures of five complexes containing the selenium ligand II have been determined by single-crystal X-ray crystallography. Three different ring conformations were observed, a pseudo-butterfly, hinge and in the case of all three PR₃ complexes, pseudo-boat conformations. Within the Pd–O–P–N–P–Se rings there is evidence for π-electron delocalisation.     

Bipolar Mass Spectrometry of Labile Coordination Complexes, Redox Active Inorganic Compounds, and Proteins Using a Glass Nebulizer for Sonic-Spray Ionization

In this study, we report on the development of a novel nebulizer configuration for sonic-spray ionization (SSI) mass spectrometry (MS), more specifically for a version of SSI that is referred to as Venturi easy ambient sonic-spray ionization (V-EASI) MS. The developed nebulizer configuration is based on a commercially available pneumatic glass nebulizer that has been used extensively for aerosol formation in atomic spectrometry. In the present study, the nebulizer was modified in order to achieve efficient V-EASI-MS operation. Upon evaluating this system, it has been demonstrated that V-EASI-MS offers some distinct advantages for the analysis of coordination compounds and redox active inorganic compounds over the predominantly used electrospray ionization (ESI) technique. Such advantages, for this type of compounds, are demonstrated here for the first time. More specifically, a series of labile heptanuclear heterometallic [Cu^II ₆Ln^III] clusters held together with artificial amino acid ligands, in addition to easily oxidized inorganic oxyanions of selenium and arsenic, were analyzed. The observed advantages pertain to V-EASI appearing to be a “milder” ionization source than ESI, not requiring electrical potentials for gas phase ion formation, thus eliminating the possibility of unwanted redox transformations, allowing for the “simultaneous” detection of negative and positive ions (bipolar analysis) without the need to change source ionization conditions, and also not requiring the use of syringes and delivery pumps. Because of such features, especially because of the absence of ionization potentials, EASI can be operated with minimal requirements for source parameter optimization. We observed that source temperature and accelerating voltage do not seem to affect labile compounds to the extent they do in ESI-MS. In addition, bipolar analysis of proteins was demonstrated here by acquiring both positive and negative ion mass spectra from the same protein solutions, without the need to independently adjust solution and source conditions in each mode. Finally, the simple and efficient operation of a dual-nebulizer configuration was demonstrated for V-EASI-MS for the first time.

Ordering in Bio-Polyelectrolyte Chitosan Solutions

The scaling of the polyelectrolyte scattering peak in chitosan solutions, as deduced from the relation q_max∼c_p^α was studied by synchrotron SAXS as a function of the charge density of the polymer. We observe a variation in the α exponent corresponding to the limit of the ionic condensation, by varying the degree of acetylation of the polymer. The nature of the solution medium also affects the polyelectrolyte peak, and it is shown that in alcoholic/water mixtures, the lower dissociation of the acid induces a lower charge density, thus influencing the polyelectrolyte ordering.     

Detection of genetically modified corn (Bt176) in spiked cow blood samples by polymerase chain reaction and immunoassay methods

The fate of DNA and protein transgenic sequences in products derived from animals fed transgenic crops has recently raised public interest. Sensitive molecular tests targeting the Bt176 genetic construct and the transgenic Cry1Ab protein were developed to determine whether plant sequences, especially transgenic sequences, are present in animal products. A protocol for total DNA extraction and purification from cow whole blood samples was first drawn up and assessed by spiking with known amounts of DNA from Bt176 maize. The limit of detection for transgenic sequences (35S promoter and Bt176-specific junction sequence) was determined by both the polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA) and the 5'-nuclease PCR assay. Four additional PCR systems were built to substantiate the results. The first detects a mono-copy maize-specific sequence (ADH promoter). Two others target multi-copy sequences from plant nucleus (26S rRNA gene) and chloroplast (psaB gene). The last one, used as a positive control, targets a mono-copy animal sequence (alpha(s1)-casein gene). Both methods detected a minimum spiking at 25 copies of Bt176 maize/mL in 10 mL whole blood samples. The sandwich ELISA kit used detected down to 1 ng transgenic Cry1Ab protein/mL spiked whole blood.     

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.