Invariance of a system of automatic control

Utilizing the method of Lyapunov functions and matrix calculus, design of a nonlinear stable invariant system of automatic control is implemented. Sufficient conditions of invariance with precision up to e directly associated with the criterion of absolute stability of a system are obtained.Translated from Dinamicheskie Sistemy, No. 4, pp. 10–15, 1985.     

Capabilities and limits of ICP-MS for direct determination of element traces in saline solutions

An ICP-MS method for the determination of ultra-traces of 24 Elements (Li, Be, Mg, Al, Cr, Mn, Co, Zn, Cu, Ga, As, Se, Rb, Sr, Mo, Ag, Cd, Sn, Sb, Ba, Tl, Pb, Bi, U) at ng/L to μg/L levels in highly saline solutions (up to 30 g/L NaCl) was developed. Calculated to the salt content of the samples, limits of detection at the sub-μg/kg level were obtained. This allows the measurement of samples like sea water, or clinical samples like urine, serum and whole blood, with few or without sample preparation and a drastic improvement to the limits of detection. Compared to the determination in solutions of 1 g/L NaCl the limits of detection in the original sample were improved by one order of magnitude. Improvements in instrumental stability are achieved by the use of an additional gas, that is introduced to the aerosol stream and avoids salt deposition in the aerosol tube of the torch, the use of High Matrix Content (HMC) cones, that show no clogging even at NaCl-concentrations up to 50 g/L. With this setup the long term stability for measurements with changing matrix concentrations is < 10% without and < 5% with use of an internal standard for the individual samples. Cleaning up is necessary after 2 days of operation. The direct analysis of the Nearshore Seawater Reference Material NRC-CNRC CASS3 showed a good agreement with the certified and measured concentrations. Elements, that do not suffer from an isobaric overlap of matrix compounds can be determined clearly at ng/L levels. Measurement of different matrix concentrations showed, that acceptable results can be achieved with a single calibration for concentrations from 5 g/L NaCl to 30 g/L NaCl, though matrix matching shows the best results.     

Change in the nature of the Ni diffusion mechanism on the Si(111) surface with adsorption of Co atoms

The diffusion of Ni on a Si (111) surface is investigated by LEED and Auger electron spectroscopy. It is found that, in contrast to the process on the initially clean Si (111)−7×7 surface, on Si (111) surfaces with submonolayer Co coverages the nature of the Ni transport mechanism changes at a temperature of about 750 °C, and the Ni surface diffusion coefficients increase sharply below this temperature. Pis’ma Zh. éksp. Teor. Fiz. 66, No. 9, 611–614 (10 November 1997)     

Application of Q-band electron spin echo spectrometer to investigation of glasses doped with rare earth ions

The Q-band electron spin echo (ESE) spectrometer which was created using modern microwave components is described. This simple incoherent apparatus was used with the X-band one for the study of phosphate and silicate glasses doped with non-Kramers rare earth Tb³⁺ ions. the EPR spectra measured by the ESE method have frequency independent peaks. The experimental results presumably show the existence of several types of paramagnetic centers in studied systems.     

Laser stabilitron

We consider a new method for producing intensity stabilization of cw lasers. This method incorporates negative feedback from a nonlinear saturable absorber to provide wideband noise-reduction and may produce an output beam for which shot noise is below the quantum limit. This new method can be used with a large variety of cw lasers and is particularly applicable to frequency-stabilized lasers which are locked to absorption lines.Permanent address: Institute of Laser Physics, Novosibirsk 630090, Russia     

Intra-cavity spectroscopy with diode lasers

A multi-mode diode laser with an external cavity is studied experimentally and theoretically for its application to intra-cavity spectroscopy. One facet of a typical Ga_0.89Al_0.11As laser diode was antireflection-coated by deposition of HfO₂ such that 10^–3 residual reflectivity was left over. This diode was placed in an external optical cavity. The emission spectrum of this diode laser is highly sensitive to any frequency-dependent loss in the cavity, and the detectivity of such a loss grows with the pump rate. Even close to threshold, the absorption at 780 nm of Rb atoms with a density of 5×10¹⁰ cm^–3 has been detected. An adequate model for diode lasers based on rate equations and including frequency-dependent gain saturation is developed and applied to the calculations of output spectra. The sensitivity of these spectra to intra-cavity absorption is determined by the overall cavity loss — which is rather high — and the fraction of spontaneous emission in the total emission, in contrast with dye lasers where it is limited by nonlinear mode coupling. Various criteria for the sensitivity are suggested. The smallest detectable absorption with a perfectly antireflection-coated laser is 10^–6 cm^–1. Improvement of the characteristics of the laser diode would increase the sensitivity.     

Line Narrowing of a Tunable High Pressure CO2 Laser by Means of an Improved Non-Littrow Cavity

A model is reported to foresee ,for different mirror choices, the spectral properties of a high pressure, frequency tunable, CO₂ laser, operating with a non-Littrow grating mounting. The calculations show a larger frequency selectivity for not collimated plane cavities. The model is experimentally verified in a suitable high pressure laser. In particular narrowed linewidths less than 300MHz ( FWHM) are obtained.