3D Metal–Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis,Crystal Structures,Gas Adsorption,and Magnetic Properties

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc²⁻) [Co₃(btdc)₃(bpy)₂]·4DMF, 1; [Co₃(btdc)₃(pz)(dmf)₂]·4DMF·1.5H₂O, 2; [Co₃(btdc)₃(dmf)₄]∙2DMF∙2H₂O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co₃(RCOO)₆}, connected either by btdc^2– ligands (1, 3) or by both btdc^2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N₂, O₂, CO, CO₂, CH₄ adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m²⋅g⁻¹ and promising gas separation performance with selectivity factors up to 35.7 for CO₂/N₂, 45.4 for CO₂/O₂, 20.8 for CO₂/CO, and 4.8 for CO₂/CH₄. The molar magnetic susceptibilities χ_p(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μ_eff (300 K) ≈ 4.93 μ_B. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.     

白藜芦醇的合成新方法

本文探索了合成白藜芦醇的新方法。以3,5-二甲氧基苯胺为原料,经重氮化、还原及乙酰化得到中间体N′-乙酰基-3,5-二甲氧基苯肼(4),中间体4与4-甲氧基苯乙烯经Mizoroki-Heck偶联反应得中间体5,脱去甲基即得到目标产物白藜芦醇,总收率约31.9%。中间体及目标产物的结构均经质谱及核磁氢谱确证。该路线操作简便、条件温和,可用于白藜芦醇的放大制备。     

Chemical Proteomics and Phenotypic Profiling Identifies the Aryl Hydrocarbon Receptor as a Molecular Target of the Utrophin Modulator Ezutromid

Duchenne muscular dystrophy (DMD) is a fatal muscle‐wasting disease arising from mutations in the dystrophin gene. Upregulation of utrophin to compensate for the missing dystrophin offers a potential therapy independent of patient genotype. The first‐in‐class utrophin modulator ezutromid/SMT C1100 was developed from a phenotypic screen through to a Phase 2 clinical trial. Promising efficacy and evidence of target engagement was observed in DMD patients after 24 weeks of treatment, however trial endpoints were not met after 48 weeks. The objective of this study was to understand the mechanism of action of ezutromid which could explain the lack of sustained efficacy and help development of new generations of utrophin modulators. Using chemical proteomics and phenotypic profiling we show that the aryl hydrocarbon receptor (AhR) is a target of ezutromid. Several lines of evidence demonstrate that ezutromid binds AhR with an apparent K_D of 50 nm  and behaves as an AhR antagonist. Furthermore, other reported AhR antagonists also upregulate utrophin, showing that this pathway, which is currently being explored in other clinical applications including oncology and rheumatoid arthritis, could also be exploited in future DMD therapies.     

磁性荧光双功能复合纳米粒子Fe3O4@SiO2@ZrO2:Tb3+的合成和表征

通过原位反应合成法成功合成了一种新型水溶性的磁性荧光复合纳米粒子Fe₃O₄@SiO₂@ZrO₂:Tb³⁺,并通过扫描电子显微镜(SEM)、X射线粉末衍射仪(XRD)、红外光谱仪(FT-IR)、磁性测试仪和荧光(PL)光谱对其形貌、尺寸、相组成、磁性和荧光性能进行了表征。 结果表明,核(Fe₃O₄@SiO₂)壳(ZrO₂:Tb³⁺)结构组成的磁性荧光复合纳米粒子具有超顺磁性,其饱和磁化强度达到36 emu/g,并且在494 nm(⁵D₄→⁷F₆)、549 nm(⁵D₄→⁷F₅)、587 nm(⁵D₄→⁷F₄)和625 nm(⁵D₄→⁷F₃)处具有4个Tb³⁺特有的荧光发射光谱带峰值。 磁性荧光双功能的复合纳米粒子在生物医学领域具有潜在的应用价值。     

In Vivo Endoscopic Tissue Identification by Rapid Evaporative Ionization Mass Spectrometry (REIMS)

Gastrointestinal cancers are a leading cause of mortality, accounting for 23 % of cancer‐related deaths worldwide. In order to improve outcomes from these cancers, novel tissue characterization methods are needed to facilitate accurate diagnosis. Rapid evaporative ionization mass spectrometry (REIMS) is a technique developed for the in vivo classification of human tissue through mass spectrometric analysis of aerosols released during electrosurgical dissection. This ionization technique was further developed by utilizing surface induced dissociation and was integrated with an endoscopic polypectomy snare to allow in vivo analysis of the gastrointestinal tract. We tested the classification performance of this novel endoscopic REIMS method in vivo. It was shown to be capable of differentiating between healthy layers of the intestinal wall, cancer, and adenomatous polyps based on the REIMS fingerprint of each tissue type in vivo.     

Molecular and conformational properties of comb-like polymers with ionically bound side chains studied in organic solvent

Conformational and dynamo-optical properties of a homologous series of poly(cetyltrimethylammonium 2-acrylamido-2-methylpropane sulfonates) with molecular masses ranging from 80 to 700?kDa were studied in chloroform solutions by viscometry, dynamic light scattering, sedimentation, and flow birefringence. The Mark–Kuhn–Houwink Equations for this polymer in chloroform were obtained; the values of hydrodynamic diameter and the Kuhn segment length as well as the value of intrinsic anisotropy of polarizability of the monomer unit were defined.     

Flow properties of a dusty-gas point source in a supersonic free stream

By using Lagrangian method, the flow properties of a dusty-gas point source in a supersonic free stream were studied and the particle parameters in the near-symmetry-axis region were obtained . It is demonstrated that fairly inertial particles travel along oscillating and intersecting trajectories between the bow and termination shock waves . In this region, formation of " mufti- layer structure" in panicle distribution with alternating low- and high density layers is revealed. Moreover, sharp accumulation of particles occurs near the envelopes of particle trajectories .     

A method of increasing the sensitivity for laser desorption in an ion trap mass spectrometer

Laser desorption in an ion trap mass spectrometer shows significant promise for both qualitative and trace analysis. In this work, we explore various combinations of time-varying DC and radiofrequency (RF) fields in order to optimize laser-generated signals. By judicious choice of timing between the laser desorption pulse and the rise in the applied RF trapping potential, we observed over an order of magnitude enhancement in the trapped ion signal. This new method for laser desorption has enabled us to observe mass spectra of many compounds (e.g., pyrene, dichlorobenzene, and ferrocene) that are barely detectable using previous laser desorption methods. Effects of laser timing and the magnitude of the steady-state RF potential are discussed.     

并联铁电体冲击去极化输出电流实验和计算

 为分析不同数量铁电体的输出电流特征,进行了多片并联PZT95/5铁电体冲击去极化实验,测量了电阻负载下铁电体的输出电流;建立了并联铁电体输出电流的计算模型,计算了并联铁电体的输出电流。通过比较计算和实验结果,分析了铁电体数量和冲击波状态对铁电体输出电流的影响。结果表明：若进入铁电体的冲击波为平面波,铁电体输出电流的波形接近方波,电流峰值随铁电体并联数量的增加成比例增加,冲击波波形和侧向稀疏波对铁电体输出电流波形和去极化率有很大的影响。     

Microwave-Assisted Conversion of Carbohydrates

Catalytic conversion of carbohydrates into value-added products and platform chemicals became a trend in recent years. Microwave activation used in the processes of carbohydrate conversion coupled with the proper choice of catalysts makes it possible to enhance dramatically the efficiency and sometimes the selectivity of catalysts. This mini-review presents a brief literature survey related to state-of-the-art methods developed recently by the world research community to solve the problem of rational conversion of carbohydrates, mostly produced from natural resources and wastes (forestry and agriculture wastes) including production of hydrogen, synthesis gas, furanics, and alcohols. The focus is made on microwave technologies used for processing carbohydrates. Of particular interest is the use of heterogeneous catalysts and hybrid materials in processing carbohydrates.