Analysis of ion binding on humic substances and the determination of intrinsic affinity distributions

Humic substances are characterized by a variable electric potential and by a variety of binding sites leading to chemical heterogeneity. Binding of ions to these substances is influenced by both factors. A methodology based on acid—base titrations at several salt levels is presented that allows for the assessment of an appropriate electrostatic double-layer model and the intrinsic proton affinity distribution. The double-layer model is used for the conversion of pH to pH_S for each data point, where H_S is the proton concentration in the diffuse layer near the binding site. It is shown that with an appropriate double-layer model the proton binding curves at different salt levels converge into one “master curve” when plotted as a function of pH_S. The intrinsic proton affinity distribution can then be derived from the “master curve” using the LOGA method. A rigorous analysis of metal binding to humic substances is complex and in practice is not feasible. Under two different (simplifying) assumptions, namely fully coupled and uncoupled binding, it is shown how intrinsic metal ion affinity distributions can be obtained. Model calculations show that apparent metal ion affinity distributions do not resemble the intrinsic metal ion affinity distribution.     

A study of the water-soluble proteins of the seeds of the cotton plants Gossypium hirsutum and G. barbadense

It has been shown by electrophoresis in polyacrylamide gel that different enzymes with similar electrophoretic mobilities may be localized in one and the same zone of water-soluble cottonseed proteins. Some zones not stained by the usual protein dyes also possess enzymatic activity. It has been established that the majority of the electrophoretic fractions consist of a series of polypeptides with different molecular weights, mainly of low-molecular-weight nature. The results are given of an investigation of the peroxidase, α-amylase, lipase, NADH-DCPIP oxidoreductase, and NADPH-DCPIP oxidoreductase activities of the water soluble fraction of the proteins of the seeds of the species mentioned.     

Critical micelle concentrations for alkyltrimethylammonium bromides in water from 25 to 160°C

Critical micelle concentrations were determined by conductance measurements for decyl-, dodecyl-, tetradecyl- and hexadecyltrimethylammonium bromide in water at 25, 60, 95, 130, and 160°C. The results are discussed in terms of the equilibrium model and the nonlinear Poisson-Boltzmann model for micelle formation. The free energies of transferring a methylene group from water to the oil-like interior of the micelle are found to be –781 at 25°C, –796 at 60°C, –819 at 95°C, –815 at 130°C, and –787 at 160°C cal-mol^–1.     

Plasma polymerization. V. A systematic investigation of the inductively coupled RF plasma polymerization of the isomeric tetrafluorobenzenes

A systematic investigation has been made of the composition, gross structural features, and rates of deposition of plasma polymer films produced from the excitation of inductively coupled RF plasmas in the isomeric tetrafluorobenzenes. ESCA data reveal that the dominant reaction involves rearrangement such that under a wide variety of experimental conditions the composition of the crosslinked products remains essentially the same as that of the starting material. Small differences in rates of deposition are observed for the different isomers, and theoretical SCF MO studies at the MNDO level provides a basis for discussion of the experimental data.     

The use of magnesium perchlorate as desiccant in the syringe injection technique for determination of mercury by cold-vapour atomic absorption spectrometry

The method developed earlier was found to suffer a loss in sensitivity when the magnesium perchlorate desiccant became damp. The most sensitive and consistent results were obtained when the magnesium perchlorate was removed from the sample injection manifold. Under most circumstances a desiccant is not required.     

Chlorine nitrate photolysis by a new technique: very low pressure photolysis

Very low pressure photolysis (VLPØ) of chlorine nitrate was performed in a quartz Knudsen cell. The light source was a 2500 W high-pressure xenon lamp, and a modulated molecular-beam mass spectrometer was used to monitor the concentration of ClONO₂ and photolysis products. Because of the low pressures used (? 10^?3 torr) and the short residence time in the cell (≈1 s), secondary reactions were unimportant and the primary products could be directly identified. The primary photolysis products (λ ≈ 2700 Å) are atomic chlorine and NO₃ free radical. Chlorine atoms were identified both by the appearance of Cl₂ (wall recombination product; the walls were not poisoned) and by HCl produced when C₂H₆ was added to the cell. Nitrate free radical was directly identified as a mass peak at m/e = 62, as well as by chemical titration with nitric oxide: NO₃ + NO → 2NO₂. It was verified by direct tests that the peak at m/e = 62 did not arise from possible HNO₃ contamination or from N₂O₅, a possible secondary product. This titration reaction was used to measure quantitatively a lower limit to the primary quantum yield, φ ? 0.5 ± 0.3. This represents a lower limit because of the unknown extent of the secondary photolysis of NO₃ under our conditions. We believe this to be the first observation using mass spectrometry of the NO₃ free radical. The quantum yield for atomic chlorine is φ = 1.0 ± 0.2. N₂O was used to test for O(¹D) according to the reaction, O(¹D) + N₂O → products; none was observed. Triplet oxygen, O(³P) was observed to the extent of ≈ 10% by the reaction O(³P) + NO₂ → NO + O₂, but this yield can also be due to the photolysis of NO₃ free radical produced in the primary step. We conclude that the predominant reaction pathway is

.     

A theoretical investigation of molecular core binding and relaxation energies in a series of oxygen-containing organic molecules of interest in the study of surface oxidation of polymers

Nonempirical LCAO MO SCF computations (in the ΔSCF formalism) have been carried out of binding energies and relaxation energies for an extensive series of oxygen-containing organic systems encompassing most of the common functionalities. The molecules for which experimental data are available for comparison demonstrate the adequacy of the treatment for describing the relative binding energies for both the C_ls and O_ls core levels. A sound basis is therefore provided for the discussion of relative core binding energies (C_ls and O_ls) for functionalities for which experimental data are not available, that is, hydroperoxides, peroxides, peroxyacids, and peroxyesters, a knowledge of which is essential for investigations of the surface oxidation of polymers by means of ESCA. C_ls shifts are discussed in terms of primary and secondary substituent effects of oxygen, which greatly simplify the analysis of complex unresolved spectra, whereas for the O_ls levels a similar but less straightforward situation exists. The relaxation energies associated with both C_ls and O_ls core ionization follow a dependence on the binding energy for a given structural type.     

Quantitative Felddesorptions-Massenspektrometrie. II

Zusammenfassung Die Molekülionen von Gemischen polycyclischer Kohlenwasserstoffe wurden auf der Photoplatte eines hochauflösenden Felddesorptions-Massenspektrometers registriert. Die erhaltenen Schwärzungsintensitäten wurden mit der relativen Konzentration der eingesetzten Mischungskomponenten verglichen. Proben im Mikrogrammbereich ergaben Abweichungen von etwa ± 5%.Wir danken Herrn Dr. H. Güsten, Karlsruhe, für die uns zur Verfügung gestellten polycyclischen Kohlenwasserstoffe und Herrn Dr. W. D. Lehmann für wertvolle Diskussionen. Der Deutschen Forschungsgemeinschaft, dem Ministerium für Wissenschaft und Forschung des Landes Nordrhein-Westfalen sowie dem Fonds der chemischen Industrie danken wir für die finanzielle Unterstützung.     

Indo study of some cyclic carbenes

INDO calculations, with geometry optimization, have been performed on the cyclic carbenes cyclopropenylidene (I) cyclopropylidene (II), and cyclopentadienylidene (III). It is found that all three systems have a singlet ground state and, due to aromaticity, the triplet-singlet energy separations for I and III are particularly large. In addition, for each system, the electronic structure and its influences on geometry and reactivity are discussed.     

High-pressure silicate pyrochlores,Sc2Si2O7 and In2Si2O7

The silicate compounds Sc₂Si₂O₇ and In₂Si₂O₇ have been converted from thortveitite type to pyrochlore type at 1000°C, 120 kbar, with resulting cell constants of 9.287(3) and 9.413(3) Å, respectively. Invariant reflection intensities in the X-ray powder diffraction patterns allowed precise absorption corrections to be made, and refinement of thermal parameters and of the single structural parameter x gave values of 0.4313(21) and 0.4272(15), respectively. The corresponding six-coordinate SiO distances were 1.761(7) and 1.800(5) Å, and the average eight-coordinate distances for ScO₈ and InO₈ were 2.267 and 2.275 Å. Values of structure-refined bond lengths for compounds containing six-coordinate silicon are surveyed, and overall weighted average octahedral distances of 1.782(14) Å for SiO and 2.520(18) Å for OO are derived. Pyrochlore phases were not produced from rare-earth disilicate or monosilicate phases subjected to the same reaction conditions as the Sc and In compounds.