Size Matters! On the Way to Ionic Liquid Systems without Ion Pairing

Several, partly new, ionic liquids (ILs) containing imidazolium and ammonium cations as well as the medium‐sized [NTf₂]^? (0.230 nm³; Tf=CF₃SO₃^?) and the large [Al(hfip)₄]^? (0.581 nm³; hfip=OC(H)(CF₃)₂) anions were synthesized and characterized. Their temperature‐dependent viscosities and conductivities between 25 and 80 °C showed typical Vogel–Fulcher–Tammann (VFT) behavior. Ion‐specific self‐diffusion constants were measured at room temperature by pulsed‐gradient stimulated‐echo (PGSTE) NMR experiments. In general, self‐diffusion constants of both cations and anions in [Al(hfip)₄]^?‐based ILs were higher than in [NTf₂]^?‐based ILs. Ionicities were calculated from self‐diffusion constants and measured bulk conductivities, and showed that [Al(hfip)₄]^?‐based ILs yield higher ionicities than their [NTf₂]^? analogues, the former of which reach values of virtually 100 % in some cases.From these observations it was concluded that [Al(hfip)₄]^?‐based ILs come close to systems without any interactions, and this hypothesis is underlined with a Hirshfeld analysis. Additionally, a robust, modified Marcus theory quantitatively accounted for the differences between the two anions and yielded a minimum of the activation energy for ion movement at an anion diameter of slightly greater than 1 nm, which fits almost perfectly the size of [Al(hfip)₄]^?. Shallow Coulomb potential wells are responsible for the high mobility of ILs with such anions.     

Tailoring the Structure of Two‐Dimensional Self‐Assembled Nanoarchitectures Based on NiII–Salen Building Blocks

The synthesis of a series of Ni^II–salen‐based complexes with the general formula of [Ni(H₂L)] (H₄L=R²‐N,N′‐bis[R¹‐5‐(4′‐benzoic acid)salicylidene]; H₄L1: R²=2,3‐diamino‐2,3‐dimethylbutane and R¹=H; H₄L2: R²=1,2‐diaminoethane and R¹=tert‐butyl and H₄L3: R²=1,2‐diaminobenzene and R¹=tert‐butyl) is presented. Their electronic structure and self‐assembly was studied. The organic ligands of the salen complexes are functionalized with peripheral carboxylic groups for driving molecular self‐assembly through hydrogen bonding. In addition, other substituents, that is, tert‐butyl and diamine bridges (2,3‐diamino‐2,3‐dimethylbutane, 1,2‐diaminobenzene or 1,2‐diaminoethane), were used to tune the two‐dimensional (2D) packing of these building blocks. Density functional theory (DFT) calculations reveal that the spatial distribution of the LUMOs is affected by these substituents, in contrast with the HOMOs, which remain unchanged. Scanning tunneling microscopy (STM) shows that the three complexes self‐assemble into three different 2D nanoarchitectures at the solid–liquid interface on graphite. Two structures are porous and one is close‐packed. These structures are stabilized by hydrogen bonds in one dimension, while the 2D interaction is governed by van der Waals forces and is tuned by the nature of the substituents, as confirmed by theoretical calculations. As expected, the total dipolar moment is minimized     

Is Electrostatics Sufficient to Describe Hydrogen‐Bonding Interactions?

The stability and geometry of a hydrogen‐bonded dimer is traditionally attributed mainly to the central moiety A?H???B, and is often discussed only in terms of electrostatic interactions. The influence of substituents and of interactions other than electrostatic ones on the stability and geometry of hydrogen‐bonded complexes has seldom been addressed. An analysis of the interaction energy in the water dimer and several alcohol dimers—performed in the present work by using symmetry‐adapted perturbation theory—shows that the size and shape of substituents strongly influence the stabilization of hydrogen‐bonded complexes. The larger and bulkier the substituents are, the more important the attractive dispersion interaction is, which eventually becomes of the same magnitude as the total stabilization energy. Electrostatics alone are a poor predictor of the hydrogen‐bond stability trends in the sequence of dimers investigated, and in fact, dispersion interactions predict these trends better.     

A Novel Bismuth‐Based Metal–Organic Framework for High Volumetric Methane and Carbon Dioxide Adsorption

Solvothermal reaction of H₄L (L=biphenyl‐3,3′,5,5′‐tetracarboxylate) and Bi(NO₃)₃ ? (H₂O)₅ in a mixture of DMF/MeCN/H₂O in the presence of piperazine and nitric acid at 100 °C for 10 h affords the solvated metal–organic polymer [Bi₂(L)_1.5(H₂O)₂] ? (DMF)_3.5 ? (H₂O)₃ (NOTT‐220‐solv). A single crystal X‐ray structure determination confirms that it crystallises in space group P2/c and has a neutral and non‐interpenetrated structure comprising binuclear {Bi₂} centres bridged by tetracarboxylate ligands. NOTT‐220‐solv shows a 3,6‐connected network having a framework topology with a {4 ? 6²}₂{4² ? 6⁵ ? 8⁸}{6² ? 8} point symbol. The desolvated material NOTT‐220a shows exceptionally high adsorption uptakes for CH₄ and CO₂ on a volumetric basis at moderate pressures and temperatures with a CO₂ uptake of 553 g L^?1 (20 bar, 293 K) with a saturation uptake of 688 g L^?1 (1 bar, 195 K). The corresponding CH₄ uptake was measured as 165 V(STP)/V (20 bar, 293 K) and 189 V(STP/V) (35 bar, 293 K) with a maximum CH₄ uptake for NOTT‐220a recorded at 20 bar and 195 K to be 287 V(STP)/V, while H₂ uptake of NOTT‐220a at 20 bar, 77 K is 42 g L^?1. These gas uptakes have been modelled by grand canonical Monte Carlo (GCMC) and density functional theory (DFT) calculations, which confirm the experimental data and give insights into the nature of the binding sites of CH₄ and CO₂ in this porous hybrid material.     

Synthesis and Antiviral Properties of Spirocyclic [1,2,3]‐Triazolooxazine Nucleosides

An efficient synthesis of spirocyclic triazolooxazine nucleosides is described. This was achieved by the conversion of β‐D ‐psicofuranose to the corresponding azido‐derivative, followed by alkylation of the primary alcohol with a range of propargyl bromides, obtained by Sonogashira chemistry. The products of these reactions underwent 1,3‐dipolar addition smoothly to generate the protected spirocyclic adducts. These were easily deprotected to give the corresponding ribose nucleosides. The library of compounds obtained was investigated for its antiviral activity using MHV (mouse hepatitis virus) as a model wherein derivative 3 f showed the most promising activity and tolerability.     

Inorganic Double‐Helix Nanotoroid of Simple LithiumPhosphorus Species

A theoretical study of Li₉₀P₉₀, which possesses a circular double‐helix structure that resembles the Watson–Crick DNA structure, is reported. This is a new bonding motif in inorganic chemistry. The calculations show that the molecule might become synthesized and that it could be a model for other inorganic species which possess a double‐helix structure.     

Easy Access to Ni3N– and Ni–Carbon Nanocomposite Catalysts

In the search for alternative materials to current expensive catalysts, Ni has been addressed as one of the most promising and, on this trail, its corresponding nitride. However, nickel nitride is a thermally unstable compound, and therefore not easy to prepare especially as nanoparticles. In the present work, a sol–gel‐based process (the urea glass route) is applied to prepare well‐defined and homogeneous Ni₃N and Ni nanoparticles. In both cases, the prepared crystalline nanoparticles (～25 nm) are dispersed in a carbon matrix forming interesting Ni₃N‐ and Ni‐based composites. These nanocomposites were characterised by means of several techniques, such as XRD, HR‐TEM, EELS, and the reaction mechanism was investigated by TGA and IR and herein discussed. The catalytic activity of Ni₃N is investigated for the first time, to the best of our knowledge, for hydrogenation reactions involving H₂, and here compared to the one of Ni. Both materials show good catalytic activities but, interestingly, give a different selectivity between different functional groups (namely, nitro, alkene and nitrile groups).     

Super‐Resolution Imaging of the Golgi in Live Cells with a Bioorthogonal Ceramide Probe

We report a lipid‐based strategy to visualize Golgi structure and dynamics at super‐resolution in live cells. The method is based on two novel reagents: a trans‐cyclooctene‐containing ceramide lipid (Cer‐TCO) and a highly reactive, tetrazine‐tagged near‐IR dye (SiR‐Tz). These reagents assemble via an extremely rapid “tetrazine‐click” reaction into Cer‐SiR, a highly photostable “vital dye” that enables prolonged live‐cell imaging of the Golgi apparatus by 3D confocal and STED microscopy. Cer‐SiR is nontoxic at concentrations as high as 2 μM and does not perturb the mobility of Golgi‐resident enzymes or the traffic of cargo from the endoplasmic reticulum through the Golgi and to the plasma membrane.     

A Molecular Approach to Self‐Supported Cobalt‐Substituted ZnO Materials as Remarkably Stable Electrocatalysts for Water Oxidation

In regard to earth‐abundant cobalt water oxidation catalysts, very recent findings show the reorganization of the materials to amorphous active phases under catalytic conditions. To further understand this concept, a unique cobalt‐substituted crystalline zinc oxide (Co:ZnO) precatalyst has been synthesized by low‐temperature solvolysis of molecular heterobimetallic Co_4?xZn_xO₄ (x=1–3) precursors in benzylamine. Its electrophoretic deposition onto fluorinated tin oxide electrodes leads after oxidative conditioning to an amorphous self‐supported water‐oxidation electrocatalyst, which was observed by HR‐TEM on FIB lamellas of the EPD layers. The Co‐rich hydroxide‐oxidic electrocatalyst performs at very low overpotentials (512 mV at pH 7; 330 mV at pH 12), while chronoamperometry shows a stable catalytic current over several hours.