Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Reversed-phase liquid chromatography and argentation chromatography of the minor capsaicinoids

An investigation of the liquid chromatography of the minor capsaicinoids in a commercial capsaicinoid mixture is reported. Twelve stationary phases including C₈, C₁₈, C₃₀, phenyl, and cation-exchange chemistries were examined in combination with isocratic aqueous methanol and aqueous acetonitrile mobile phases. A phenyl stationary phase and aqueous acetonitrile mobile phase baseline-resolved 7 of 11 capsaicinoids, and selected ion chromatograms (LC–ESI-MS) demonstrated this was the most effective reversed-phase separation. Argentation chromatography with an alkyl or phenyl column and aqueous silver nitrate–methanol mobile phase revealed the presence of the 6-ene-8-methyl and 6-ene-9-methyl homocapsaicin isomers and the absence of 7-ene-9-methyl homocapsaicin. A mixed phenyl–cation-exchange stationary phase (charged with silver ion) enabled unique and useful separations of the capsaicinoids.     

Ambient-pressure vapor deposition of octanethiol self-assembled monolayers

Scanning tunneling microscopy was used to characterize self-assembled monolayers (SAMs) of octanethiol on Au(111), created using vapor deposition at elevated temperatures and ambient pressure. Monolayers contained large, close-packed ( radical3 x radical3)R30 degrees domains with sizes considerably larger than those typically formed from conventional solution-phase preparation and with crystallographically straight domain boundaries. New striped surface phases were also observed, including a 13 x radical3 phase with a density that was 69% of the close-packed density; these striped phases appeared topographically higher in STM images than close-packed monolayers.     

Synthesis, structure, and X-band (9.5 GHz) EPR characterization of the new series of pH-sensitive spin probes: N,N-disubstituted 4-amino-2,2,5,5-tetramethyl-3-imidazoline 1-oxyls

[reaction: see text] An approach to the synthesis of new imidazoline nitroxides bearing an N',N'-disubstituted amidine group is reported. The approach is based on the alkylation of diamagnetic 4-R-amino-1,2,2,5,5-pentamethyl-3-imidazolines with bromoacetic acid ethyl ester; the products of alkylation are further oxidized to the corresponding nitroxides. The approach allows a variety of functional groups to be introduced into the nitroxide molecule structure. Alkylation with bromoacetic acid ethyl ester was found to proceed with high regioselectivity and afford the products of exo-alkylation. The regiochemical assignment is made on the basis of 13C NMR spectra and confirmed by X-ray diffraction study. All of the nitroxides synthesized here were shown to have pH-dependent EPR spectra with pKa ranging from 3.5 to 6.2. For nitroxides 13 bearing the carboxylic group remote to the nitroxide moiety, the changes in isotropic magnetic parameters of EPR spectra due to reversible deprotonation of the carboxylic group were found to be small. For these nitroxides, we demonstrate an alternative approach for pKa determination that is based on measuring the peak-to-peak line width of the EPR spectrum in the presence of the paramagnetic broadening agent potassium ferricyanide. The partition coefficients of nitroxides in octanol/H2O and octanol/phosphate buffer solution mixtures were measured to reveal a range of their lipophilicities.     

Transition-Metal Complexes with Nano-Sized Phosphine and Pyridine Ligands-Catalysis,Fluxional Behavior and Molecular Recognition

Nano-sized phosphine and pyridine ligands having tetraphenylphenyl-, m-terphenyl-, poly(benzylether) moieties were synthesized. These ligands showed a remarkable effect on homogeneous transition metal catalyzed reactions. Pd(II) complexes with tetraphenylphenyl substituted pyridine ligands show high catalytic activities for oxidation of ketones suppressing Pd black formation and maintains the catalytic activity for a long time. Rh(I) complex catalysts with m-terphenyl substituted phosphine ligands showed remarkable rate acceleration in the hydrosilylation of ketones. In addition, several phosphinocalixarene ligands were synthesized and their coordination studies with Pd(II), Pt(II), Ru(II), Ir(I), and Rh(I) metals were documented. Ir(I) and Rh(I) cationic complexes with a 1,3,5-triphosphinocalix[6]arene ligand showed dynamic behavior with size-selective molecular recognition.     

Oxidation of α-methylstyrene on an MCM-22 encapsulated (<Emphasis Type="Italic">R,R</Emphasis>)-(−)-<Emphasis Type="Italic">N,N′</Emphasis>-bis(3,5-di-<Emphasis Type="Italic">tert</Emphasis>-butylsalicylidene)-1,2-cyclohexanediaminocobalt(II) catalyst

(R, R)-(−)-N, N′-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediaminocobalt(II) was encapsulated into MCM-22 using the zeolite synthesis method. The encapsulated catalyst proved to be active in the oxidation of α-methylstyrene with NaOCl with higher specific activity than the homogeneous catalyst. At the same time, this encapsulated catalyst was completely inactive in the hydrolytic kinetic resolution of racemic styrene oxide. This observation is in a good correlation with the assumption of the cooperative bimetallic mechanism proposed by Annis and Jacobsen.     

Thermogravimetry as a screening tool for the estimation of the vapor pressures of pure compounds

A simplified approach was developed to estimate the vapor pressure of pure compounds from experimental data obtained by isothermal thermogravimetric (TG) analysis. A numerical procedure was developed to estimate the Antoine parameters of the substance by the analysis of isothermal TG data. The results of the experimental validations carried out evidenced that at least a preliminary estimation of vapour pressures of pure substances by the analysis of TG data is possible. The limited time and the reduced amounts of sample required for the experimental runs make the technique attractive with respect to the conventional and more accurate techniques for vapor pressure assessment.     

Hydroformylation of Olefins Catalyzed by Rhodium Trichloride Anchored on Ti-HMS

Rhodium trichloride supported on Ti-hexagonal mesoporous silica (Ti-HMS), via a bipyridyl group, is an efficient catalyst for the hydroformylation of olefins at 120 °C and 40.8 atm of CO/H₂ (CO/H₂=2/1). The catalyst is selective leading to high ratios of linear or branched aldehydes from functionalized olefins, and high activity in the case of propene which gave a turnover frequency of 6209 mol/mol(Rh)/h.     

The role of salt on cellulose dissolution in ethylene diamine/salt solvent systems

Ethylene diamine (EDA)/salt solvent systems can dissolve cellulose without any pretreatment. A comparison of the electrical conductivity of different salts in EDA was made at 25 °C, and conductivity decreased in the order of KSCN>KI>NaSCN at the same molar concentration. Among the salts tested, potassium thiocyanate (KSCN) was capable of dissolving both high molecular weight (DP>1000) and low molecular weight (DP = 210) cellulose, and this was confirmed by polarized light microscopy. ³⁹K and ¹⁴N NMR experiments were conducted at 70 °C as a function of cellobiose concentration with EDA/KSCN as the solvent. The results showed that the K⁺ ion interacts with cellobiose more than the SCN⁻ ion does. Recovered cellulose was studied by infrared spectroscopy (FTIR) and wide angle X-ray diffraction (WAXD). Changes in the FTIR absorption bands at 1,430 and 1,317 cm⁻¹ were associated with a change in the conformation of the C-6CH₂OH group. The changes in positions and/or intensities of absorption bands at 2,900, 1,163, and 8,97cm⁻¹ were related to the breaking of hydrogen bonds in cellulose. X-ray diffraction studies revealed that cellulose, recovered by precipitating cellulose solutions with water, underwent a polymorphic transformation from cellulose I to cellulose II.