In vitro antioxidant activity of extracts of Sybaris liquorice roots from Southern Italy

The antioxidant properties of extracts of Sybaris liquorice roots have been assessed using 2,2'-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity assay. The extracts, obtained by Soxhlet extraction (Et(2)O, AcOEt, MeOH and BuOH) of the yellow (inner part) and brown (cortex) root powders ensuing from decortication of the raw dry roots, followed by separation and powderisation, were analysed for their scavenging activity by evaluating the colourimetric decrease in the absorbance of DPPH. The highest antioxidant activity (98.39?±?0.56%) was observed in the case of the Et(2)O extract of the brown powder, at a concentration of 3.33?mg?mL(-1). Moreover, the total phenolic content of the extracts was determined using the Folin-Ciocalteu reagent and expressed as milligram gallic acid equivalent per gram of dry extract. Our results show that the Et(2)O extract of the liquorice root cortex could be used as an attractive natural source of antioxidant additives for food, cosmetic or pharmaceutical applications.     

In vitro evaluation of the anti-proliferative activities of the wood essential oils of three Cedrus species against K562 human chronic myelogenous leukaemia cells

There are four kinds of Cedar: Cedrus libani naturally occurring in Lebanon, Syria and Turkey, Cedrus atlantica in Morocco and Algeria, Cedrus brevefolia in Cyprus Island and Cedrus deodara which is distributed in Himalayan Mountains. Wood essential oils obtained from C. libani, C. atlantica and C. deodara were tested for the inhibition of K562 cell proliferation and for the induction of erythroid differentiation. The wood essential oils of C. libani, C. atlantica and C. deodara inhibited the proliferation of the K562 cell line exhibiting IC(50) values 23.38?±?1.7, 59.37?±?2.6 and 37.09?±?1.4?μg?mL(-1), respectively. Meanwhile, C. libani wood oils induced a percentage of erythroid differentiation of 15?±?2% at concentration 5?μg?mL(-1). Cedrus deodara wood oil indicated a percentage of erythroid differentiation of 20?±?2% at concentration 25?μg?mL(-1) and C. atlantica wood oils showed a percentage of erythroid differentiation of 12?±?1.8% at concentration 10?μg?mL(-1).     

Comparison of slurry mixing and dry milling in laboratory sample preparation for determination of ochratoxin A and deoxynivalenol in wheat

The significance of laboratory sample preparation for the determination of two important mycotoxins, ochratoxin A (OTA) and deoxynivalenol (DON), in wheat was investigated by comparing water-slurry mixing and dry-milling procedures. The distribution of OTA and DON in 10 kg samples of naturally contaminated wheat was established by analyzing one hundred 100 g subsamples of each sample. A normal distribution and a good repeatability of DON measurements was observed for both water-slurry mixing (mean 2290 microg/kg, CV 4.6%, median 2290 microg/kg) and dry milling (mean 2310 microg/kg, CV 6.4%, median 2290 microg/kg) procedures. For OTA determinations, reliable results could be obtained only by slurry mixing sample preparation (mean 2.62 microg/kg, CV 4.0%, median 2.62 microg/kg), whereas dry-milling comminution resulted in an inhomogeneous distribution with a high variability (mean 0.83 microg/kg, CV 75.2%, median 0.60 microg/kg) and a positive skewness (2.12). Ad hoc experiments were performed on different size portions of the same sample (10 kg) to assess accuracy and precision of the comminution/homogenization procedures (slurry mixing and dry milling). Very good results were obtained for DON determination with both procedures in terms of accuracy (>98.7% of the "weighted value") and precision (CV <3%). For OTA determination good results were only obtained by slurry mixing (99.4% of the "weighted value," CV 10%), whereas dry milling provided results with low accuracy (43.2% of the "weighted value") and high variability (CV 110%). This study clearly demonstrated that sample preparation by slurry mixing is strictly necessary to obtain reliable laboratory samples for OTA determination in wheat to minimize misclassification of acceptable/rejectable lots, mainly within official control.     

From red to near infra-red OLEDs: the remarkable effect of changing from X = -Cl to -NCS in a cyclometallated [Pt(N^C^N)X] complex {N^C^N = 5-mesityl-1,3-di-(2-pyridyl)benzene}

[PtL(6)X] {X = Cl or NCS and L(6) = 5-mesityl-1,3-di(2-pyridyl)-benzene} display similar luminescence in solution but, in the solid state, the packing of the molecules is different, with short PtPt interactions for X = NCS, leading to a red-shifted emission band. The effect has been used to generate OLEDs that emit squarely in the NIR region (855 nm).     

Analytical performances of a DNA-ligand system using time-resolved fluorescence for the determination of ochratoxin A in wheat

The analytical performances of a novel DNA-ligand system using the time-resolved fluorescence (TRF) response of ochratoxin A (OTA)-terbium-DNA aptamer interaction were tested for the quantitative determination of OTA in wheat. Wheat was extracted with acetonitrile/water (60:40, v/v) followed by clean-up through affinity columns containing a DNA-aptamer-based oligosorbent. Then, OTA was detected by TRF spectroscopy after reaction with a terbium fluorescent solution containing the DNA-aptamer probe. The entire procedure was performed in less than 30 min, including sample preparation, and allowed analysis of several samples simultaneously with a 96-well microplate reader. The average recovery from samples spiked with 2.5-25 μg kg(-1) OTA was 77%, with a relative standard deviation lower than 6% and a quantification limit of 0.5 μg kg(-1). Comparative analyses of 29 naturally contaminated (up to 14 μg kg(-1)) wheat samples using the aptamer-affinity column/TRF method or the immunoaffinity column/high-performance liquid chromatography method showed good correlation (r = 0.985) in the range tested. The trueness of the aptamer-based method was additionally assessed by analysis of two quality control wheat materials for OTA. The DNA-ligand system is innovative, simple and rapid, and can be used to screen large quantities of samples for OTA contamination at levels below the EU regulatory limit with analytical performances satisfying EU criteria for method acceptability.     

Stereoselective synthesis of chiral 3-aryl-1-alkynes from bromoallenes and heterocuprates

The synthesis of chiral 3-aryl-1-alkynes 3 via cross-coupling of 3-alkyl- and 3,3-dialkyl-1-bromo-1,2-dienes 1 and arylbromocuprates (RCuBr)MgBr.LiBr 2 was examined. With phenylcopper reagents and its para-substituted derivatives, as well as with 2-naphthyl cuprates, the reaction gave compounds 3 with high regioselectivity and good yields on the chemically pure product. On the contrary, when ortho-substituted phenyl reagents and 1-naphthyl cuprates were used, the regioselectivity of the process was very dependent upon the steric requirements of the alkyl substituents on the bromoallenic substrate. When the steric bulk was increased, remarkable quantities of isomeric arylallenes 4 were also observed in the reaction mixtures. The high 1,3-anti stereoselectivity of the coupling process allowed us to obtain enantiomerically enriched 3-aryl-1-alkynes from optically active allenic substrates, thus indicating a simple pathway toward the synthesis of quaternary stereogenic centers characterized by an aryl group. A possible cross-coupling mechanism was also suggested to explain the regio- and stereochemical data. For the preparation of omega-functionalized 3-phenyl-1-alkynes, the reaction of 1-bromo-3-phenylpropadiene with Knochel reagents RCu(CN)ZnCl.2LiCl was also studied; this reaction led to the acetylenic compounds in high yields mainly when the R group (also omega-functionalized) on the copper reagent was primary.     

Chemical characterisation of oxidative degradation products of Δ-THC

The chemical analysis of a sample of Δ⁹-THC, which had been stored in an ethanol/propylene glycol solution for 5 years, resulted in the isolation of several hydroxylated Δ⁹-THC derivatives, the main of which were trans-cannabitriol monoethyl ether (4) and trans-propanediol ethers 7 and 8. cis-Cannabitriol monoethyl ether (5) and the oxidised derivatives 3 and 6 were detected in lesser amounts. The structure elucidation of the unprecedented cannabinoids 3, 5, 7 and 8 was achieved mainly by NMR techniques. Full NMR assignment of compounds 4 and 6 were also made. The detection of cannabitriol (6) and the corresponding solvent-adduct analogues (compounds 4-8) was in agreement with the decomposition mechanisms previously proposed for Δ⁹-THC. The isolation of the endoperoxide 3 represents indirect evidence of the existence of unstable precursors that were suspected to be intermediates in the non-enzymatic oxidation pathway of Δ⁹-THC. Both isomers of cannabitriol monoethyl ether exhibited weak affinity at either CB₁ (K_i=2.25, 6.30 μM) or CB₂ cannabinoid receptors (K_i=1.97, 3.13 μM), the trans isomer always being more potent than the cis isomer.     

On the calculation of extended max and min operations between convex fuzzy sets of the real line

In this paper we will identify the sets of so-called sub- and pseudo-highest intersection points of convex fuzzy sets of the real line and will explore their properties. Based on the properties of these sets, an algorithm for calculating extended max and min operations between two or more convex fuzzy sets of the real line with general membership functions, not necessarily continuous, is proposed.     

Hydrogen Transport and Evolution in Ni-MH Batteries by Neutron Imaging

Efficiency losses due to side reactions are one of the main challenges in battery development. Despite providing valuable insights, the results of standard analysis on the individual components cannot be simply extrapolated to the full operating system. Therefore, non-destructive, and high resolution approaches that allow the investigation of the full system are desired. Herein, we combined neutron radiography and tomography with electrical monitoring of the state of charge of commercial Ni-mischmetal hydride batteries, to track the exchange and transport of hydrogen under operating conditions. This non-destructive approach allowed both the quantification of the hydrogen distribution in the electrodes in 4D, and the distinction between the electrochemically exchanged hydrogen and the hydrogen gas pressure generated by side reactions, as a function of the applied potential and current. One of the most counter-intuitive observation is that the generation of hydrogen gas during discharge depends on the charging state of the battery. The results presented provide critical new insights in the mechanisms governing the electrochemical processes during Nimischmetal hydride battery operation, and also pave the way for the extrapolation of this approach to the investigation of state-of-the-art Li-ions batteries.     

Syntheses,Characterization, and DNA Binding Studies of a Series of Copper(II), Nickel(II), Platinum(II) and Zinc(II) Complexes Derived from Schiff Base Ligands

Three series of metal salophen complexes derived from Zn²⁺, Cu²⁺, Pt²⁺ and Ni²⁺ have been synthesized and their interaction with quadruplex DNA has been evaluated. The compounds differ on the number of ethyl piperidine substituents. They have been characterized by ¹H NMR, IR and UV-visible spectroscopies and by HR-mass spectrometry. Their luminescent properties have been also evaluated and we can observe that, as expected, Zn²⁺ and Pt²⁺ complexes are those displaying more interesting luminescence with an emission band red-shifted with respect to the corresponding uncoordinated ligand. DNA interactions with G4 and duplex DNA were evaluated by FRET melting assays (for the Zn²⁺, Cu²⁺ and Ni²⁺ complexes) and by emission titrations (for one Pt²⁺ complex) which indicated that the disubstituted compounds 2-Ni and 2-Pt are the only ones that display good affinity for G4 DNA structures.