Characterization of nanochannel delivery membrane systems for the sustained release of resveratrol and atorvastatin: new perspectives on promoting heart health

Novel drug delivery systems capable of continuous sustained release of therapeutics have been studied extensively for use in the prevention and management of chronic diseases. The use of these systems holds promise as a means to achieve higher patient compliance while improving therapeutic index and reducing systemic toxicity. In this work, an implantable nanochannel drug delivery system (nDS) is characterized and evaluated for the long-term sustained release of atorvastatin (ATS) and trans-resveratrol (t-RES), compounds with a proven role in managing atherogenic dyslipidemia and promoting cardioprotection. The primary mediators of drug release in the nDS are nanofluidic membranes with hundreds of thousands of nanochannels (up to 100,000/mm²) that attain zero-order release kinetics by exploiting nanoconfinement and molecule-to-surface interactions that dominate diffusive transport at the nanoscale. These membranes were characterized using gas flow analysis, acetone diffusion, and scanning and transmission electron microscopy (SEM, TEM). The surface properties of the dielectric materials lining the nanochannels, SiO₂ and low-stress silicon nitride, were further investigated using surface charge analysis. Continuous, sustained in vitro release for both ATS and t-RES was established for durations exceeding 1 month. Finally, the influence of the membranes on cell viability was assessed using human microvascular endothelial cells. Morphology changes and adhesion to the surface were analyzed using SEM, while an MTT proliferation assay was used to determine the cell viability. The nanochannel delivery approach, here demonstrated in vitro, not only possesses all requirements for large-scale high-yield industrial fabrication, but also presents the key components for a rapid clinical translation as an implantable delivery system for the sustained administration of cardioprotectants.     

A New Entry to Indolo[2,3-a]carbazoles

Abstract: The synthesis of the indolo[2,3-a]carbazole ring is described starting from 3-chloromethylene-1,3-dihydro-indol-2-one 5 and 3-(cyano-ethoxycarbonyl-methyl)-indole-1-carboxylic acid ethyl ester 4.     

PHI: A powerful new program for the analysis of anisotropic monomeric and exchange‐coupled polynuclear d‐ and f‐block complexes

A new program, PHI, with the ability to calculate the magnetic properties of large spin systems and complex orbitally degenerate systems, such as clusters of d‐block and f‐block ions, is presented. The program can intuitively fit experimental data from multiple sources, such as magnetic and spectroscopic data, simultaneously. PHI is extensively parallelized and can operate under the symmetric multiprocessing, single process multiple data, or GPU paradigms using a threaded, MPI or GPU model, respectively. For a given problem PHI is been shown to be almost 12 times faster than the well‐known program MAGPACK, limited only by available hardware. © 2013 Wiley Periodicals, Inc.     

Design and Synthesis of a γ1β8‐Cyclodextrin Oligomer: A New Platform with Potential Application as a Dendrimeric Multicarrier

We report the synthesis and characterization of a water‐soluble, star‐shaped macromolecular platform consisting of eight β‐cyclodextrin (β‐CD) units anchored to the narrower rim of a γ‐CD core through bis(triazolyl)alkyl spacers. The efficient synthetic protocol is based on the microwave (MW)‐promoted Cu‐catalyzed 1,3‐dipolar cycloaddition of CD monoazides to CD monoacetylenes. The ligand‐hosting capability of the construct has been assessed by relaxometric titration and nuclear magnetic relaxation dispersion (NMRD) profiling, which showed it to be good, and this was supported by molecular dynamics simulations. To demonstrate the feasibility of obtaining supramolecular structures with high hosting ability, we designed a dimeric platform, formed by joining two nonamers through the γ‐CD cores through a bis(lithocholic acid) linker. With a view to the potential biological applications, cytotoxicity and extent of binding to human serum albumin were assessed. The properties of this dendrimeric multicarrier make it suitable for pharmaceutical and diagnostic purposes, ranging from targeted drug delivery to molecular imaging.     

Nanoscale Control of Polyoxometalate Assembly: A {Mn8W4} Cluster within a {W36Si4Mn10} Cluster Showing a New Type of Isomerism

Two near isomeric clusters containing a novel {Mn₈W₄} Keggin cluster within a [W₃₆Mn₁₀Si₄O₁₃₆(OH)₄(H₂O)8]^24? cluster are reported: K₁₀Li₁₄ [W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1 ) and K₁₀Li1_3.5Mn_0.25[W₃₆Si₄O₁₃₆Mn^II₁₀(OH)₄(H₂O)₈] ( 1′ ). Bulk characterization of the clusters has been carried out by single crystal X‐ray structure analysis, ICP‐MS, TGA, ESI‐MS, CV and SQUID‐magnetometer analysis. X‐ray analysis revealed that 1′ has eight positions within the central Keggin core that were disordered W/Mn whereas 1 contained no such disorder. This subtle difference is due to a differences is how the two clusters assemble and recrystallize from the same mother liquor and represents a new type of isomerism. The rapid recrystallization process was captured via digital microscopy and this uncovered two “intermediate” types of crystal which formed temporarily and provided nucleation sites for the final clusters to assemble. The intermediates were investigated by single crystal X‐ray analysis and revealed to be novel clusters K₄Li₂₂[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?56 H₂O ( 2 ) and Mn₂K₈Li₁₄[W₃₆Si₄Mn₇O₁₃₆(H₂O)₈]?45 H₂O ( 3 ). The intermediate clusters contained different yet related building blocks to the final clusters which allowed for the postulation of a mechanism of assembly. This demonstrates a rare example where the use X‐ray crystallography directly facilitated understanding the means by which a POM assembled.     

A Combined Kinetic and Thermodynamic Approach for the Interpretation of Continuous‐Flow Heterogeneous Catalytic Processes

The heterogeneous proline‐catalyzed aldol reaction was investigated under continuous‐flow conditions by means of a packed‐bed microreactor. Reaction‐progress kinetic analysis (RPKA) was used in combination with nonlinear chromatography for the interpretation, under synthetically relevant conditions, of important mechanistic aspects of the heterogeneous catalytic process at a molecular level. The information gathered by RPKA and nonlinear chromatography proved to be highly complementary and allowed for the assessment of optimal operating variables. In particular, the determination of the rate‐determining step was pivotal for optimizing the feed composition. On the other hand, the competitive product inhibition was responsible for the unexpected decrease in the reaction yield following an apparently obvious variation in the feed composition. The study was facilitated by a suitable 2D instrumental arrangement for simultaneous flow reaction and online flow‐injection analysis.     

Fibril Structure Demonstrates the Role of Iodine Labelling on a Pentapeptide Self-Assembly

Iodination has long been employed as a successful labelling strategy to gain structural insights into proteins and other biomolecules via several techniques, including Small Angle X-ray Scattering, Inductively Coupled Plasma Mass Spectrometer (ICP-MS), and single-crystal crystallography. However, when dealing with smaller biomolecular systems, interactions driven by iodine may significantly alter their self-assembly behaviour. The engineering of amyloidogenic peptides for the development of ordered nanomaterials has greatly benefitted from this possibility. Still, to date, iodination has exclusively been applied to aromatic residues. In this work, an aliphatic bis-iodinated amino acid was synthesized and included into a custom pentapeptide, which showed enhanced fibrillogenic behaviour. Peptide single crystal X-ray structure and powder X-ray diffraction on its dried water solution demonstrated the key role of iodine atoms in promoting intermolecular interactions that drive the peptide self-assembly into amyloid fibrils. These findings enlarge the library of halogenated moieties available for directing and engineering the self-assembly of amyloidogenic peptides.     

Multifunctional polyurethane foams with thermal energy storage/release capability

Journal of Thermal Analysis and Calorimetry - In this work, polyurethane (PU) insulating panels containing different amounts of a microencapsulated paraffin with a nominal melting temperature of...     

One step nanoencapsulation of corrosion inhibitors for gradual release application

The direct application of corrosion inhibitors on metal surfaces is potentially dangerous for the environment and the restoration operators, thus new conservation strategies are mandatory. In this study, two copper corrosion inhibitors, 1H-benzotriazole (BTA) and 5-phenyl-1H-tetrazole (PT), are encapsulated in a silica nanocontainer, for future application in smart coatings, with the aim to reduce the amount of chemicals used in treatments, their dispersion in the environment and the direct exposure of the operators to these chemicals. In particular, composite silica nanocapsules, containing the corrosion inhibitors, are prepared via one-step synthesis, based on mini-emulsion polymerisation processes.The morphology, structure, and texture of these loaded silica nanocontainers are characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ physisorption (BET/BJH). Micro-Raman spectroscopy (RS) is performed to characterise the composition. UV–visible spectroscopy and thermal analysis (TG/DSC) are performed for the loading and encapsulation efficiency (L%, EE%) study.Synthesised nanocapsules show a core-shell structure and, when loaded with the inhibitors, have size ranging from about 130 to 170 nm and a BET surface area of the order of 800 m²/g. The EE% is maximum in the case of BTA and decreases to ～52% in the case of PT.     

Impact of Matrix Metalloproteinase-9 during Periodontitis and Cardiovascular Diseases

Matrix metalloproteinase-9 (MMP-9) has been shown to play a key role in endothelial function and perhaps pivotal in the correlation between periodontal disease and cardiovascular disease (CVD). For the study, the impact of MMP-9 of periodontitis and CVD on serum and saliva concentrations was analyzed. For the study patients with periodontitis (n = 31), CVD (n = 31), periodontitis + CVD (n = 31), and healthy patients (n = 31) were enrolled. Clinical and demographic characteristics as well as serum and salivary MMP-9 were evaluated. MMP-9 concentrations in serum and saliva were statistically elevated in patients with CVD (p < 0.01) and in patients with periodontitis plus CVD (p < 0.001) compared to patients with periodontitis and healthy subjects. Multivariate regression analysis showed that c-reactive protein (hs-CRP) was the only significant predictor for MMP-9 serum (p < 0.001), whereas hs-CRP (p < 0.001) and total cholesterol (p = 0.029) were the statistically significant salivary MMP-9 predictors. This study evidenced that patients with CVD and periodontitis + CVD presented elevated MMP-9 concentrations in serum and saliva compared to patients with periodontitis and healthy subjects. Furthermore, hs-CRP was a negative predictor of serum and salivary MMP-9.