Determination of specific volatile organic compounds synthesised during Tuber borchii fruit body development by solid-phase microextraction and gas chromatography/mass spectrometry

Fruit body development is a particular phase of the Tuber life cycle, characterised by the aggregation of different types of hyphae, i.e., vegetative hyphal cells and highly specialised reproductive hyphae (asci). In order to identify the volatile organic compounds (VOCs) produced in different stages of the Tuber borchii ripening fruit body, solid-phase microextraction with gas chromatography and mass spectrometry was used. The volatile organic compounds were extracted using a DVB/CAR/PDMS 50/30 microm fiber placed for 10 min at room temperature in the truffle headspace. The results obtained reveal 49 compounds each of which was present only in a particular stage of maturation. 1-octen-3-ol, aromadendrene, alpha-farnesene and other terpenoid compounds were of particular interest, and their possible biological roles are discussed. The production of aromadendrene in the completely unripe fruit body suggests the existence of communication events in the early stage of ascomata formation between the fungus and the host plant. alpha-Farnesene could represent a chemotactic attractant to saprophytic organisms in order to disperse the fungal spores in the environment. The identification of the VOCs produced by truffles during their maturation could give information about the processes underlying this phase of Tuber life cycle.     

Enantioselective epoxidation of alpha,beta-enones promoted by alpha,alpha-diphenyl-L-prolinol as bifunctional organocatalyst

[reaction: see text] An operationally simple and mild protocol for the catalytic enantioselective epoxidation of alpha,beta-unsaturated ketones has been estabilished using commercially available alpha,alpha-diphenyl-l-prolinol as bifunctional organocatalyst and tert-butyl hydroperoxide (TBHP) as oxidant. The epoxides have been obtained in good yields and with up to 80% ee.     

Direct determination of arsenic and antimony in naphtha by electrothermal atomic absorption spectrometry with microemulsion sample introduction and iridium permanent modifier

This paper reports the determination of arsenic and antimony in naphtha by employing electrothermal atomic absorption spectrometry (ETAAS) as the analytical technique. In order to promote the direct determination of the analytes in the very volatile naphtha, the formation of a microemulsion with different surfactants (Triton X-100 and Brij-35) and different chemical modification strategies were tested. The results indicated that Triton X-100 is the best emulsification agent for naphtha in both As and Sb determination when it is employed at a concentration of 1% w/v in the microemulsion. Under these conditions, the microemulsion was stabile for at least 2 h. By using Brij-35 it was possible to achieve good stability only in the first 15 min. Among all chemical modification approaches investigated (Ir permanent modifier, W-Ir permanent modifier, and Pd modifier), the Ir permanent modifier provided better sensitivity for both analytes and allowed a higher pyrolysis temperature, which decreased the background signals at lower levels. Under the best conditions established in this work, an RSD of 4.6% (20 g L^–1) and a detection limit of 2.7 g L^–1 were observed for arsenic. For antimony, an RSD of 4.0% (20 g L^–1) and a detection limit of 2.5 g L^–1 were obtained. The accuracy of the procedure was assessed by analyzing spiked samples of naphtha from different origins.     

Modular synthesis of heparin oligosaccharides

A general, modular strategy for the first completely stereoselective synthesis of defined heparin oligosaccharides is described. Six monosaccharide building blocks (four differentially protected glucosamines, one glucuronic and one iduronic acid) were utilized to prepare di- and trisaccharide modules in a fully selective fashion. Installation of the alpha-glucosamine linkage was controlled by placing a conformational constraint on the uronic acid glycosyl acceptors thereby establishing a new concept for stereochemical control. Combination of disaccharide modules to form trans-uronic acid linkages was completely selective by virtue of C2 participating groups. Coupling reactions between disaccharide modules exhibited sequence dependence. While the union of many glucosamine uronic acid disaccharide modules did not meet any problems, certain sequences proved not accessible. Elaboration of glucosamine uronic acid disaccharide building blocks to trisaccharide modules by addition of either one additional glucosamine or uronic acid allowed for stereoselective access to oligosaccharides as demonstrated on the example of a hexasaccharide resembling the ATIII-binding sequence. Final deprotection and sulfation yielded the fully synthetic heparin oligosaccharides.     

X-Ray Structure of an Inclusion Compound of 5,5'-Biscalix[4]arene-hexabenzoate with Toluene

The structure of the 1:3 complex between 5,5'-biscalix[4]arene-hexabenzoateand toluene has been determined by a single crystal X-ray diffraction study. Thetwo calix[4]arene subunits of the 5,5'-biscalix[4]arene system are related by aninversion center and are joined by an eclipsed biphenyl para-para linkage. Each calix[4]arene moiety displays a 1,3-alternate conformation and includes a toluene molecule within two opposite benzoate groups, while a third toluene molecule lies close to a crystallographic inversion center.     

Surface modifications of bioglass immersed in TRIS-buffered solution. A multitechnical spectroscopic study

Bioglass 45S5 is used in the medical field as a bone regenerative material. In fact, when immersed in body fluid, a layer of hydroxy carbonate apatite (HCA), an analogue to the mineral phase that bones are made of, is deposited on its surface. A mechanism that would explain this process has been hypothesized and includes cation leaching from the glass to the solution and formation of both a silica-rich layer and a Ca/P-rich surface layer, prior to the actual crystallization of HCA. The present paper analyzes the dissolution of 2-mum-size particles of Bioglass in TRIS-buffered solution, focusing on the modifications occurring at the surface of the particles. Results from Transmission FT-IR, Raman, and X-ray Photoelectron Spectroscopy were compared in order to obtain this information. In all cases, precise spectral band assignments were obtained by comparing Bioglass spectra, before and after reaction, with the spectra registered on some selected reference samples. The results confirm the hypothesized mechanism of Bioglass reactivity and yield new insights on the surface modifications of the samples. In particular, the following is shown: the strength of the surface H-bonding system and of water coordination decreases during the reaction; surface carbonates, initially mainly bound to Na, are substituted by an increasing amount of Ca-bound carbonates; and the final calcium phosphate layer obtained is very similar, but not identical, to carbonated hydroxyapatite.     

New mu-oxo octanuclear complexes of 3d elements stabilized by dialkylcarbamato ligands. Synthesis and X-ray crystal and molecular structures

The octanuclear aggregates M(8)(mu(4)-O)(2)(O(2)CN(i)()Pr(2))(12) [M = Mn(II) 1, Co(II) 2, Ni(II) 3] have been prepared in good yields by controlled hydrolysis of the corresponding metal carbamate precursors [M(O(2)CN(i)()Pr(2))(2)](n)(). X-ray analysis has shown compounds 1-3 to be isostructural. The core of 2 contains two distorted [M(4)O] tetrahedra related by an inversion center. The hexanuclear carbamates M(6)(O(2)CNEt(2))(12) in toluene undergo a metal redistribution process with formation of the hexanuclear carbamates M'(x)M' '(6-x)(O(2)CNEt(2))(12), M' = Co, M' ' = Mn, as evidenced by mass-spectrometric data. In the presence of moisture, the mixed octanuclear carbamates Co(x)Mn(6-x)(MnO)(CoO)(O(2)CNEt(2))(12) were promptly formed and detected by DCI/MS measurements. Mass spectral data of Co(8)(mu(4)-O)(2)(O(2)CN(i)Pr(2))(12) are also reported.     

Mirror-image packing in enantiomer discrimination molecular basis for the enantioselectivity of B.cepacia lipase toward 2-methyl-3-phenyl-1-propanol

Synthetic chemists often exploit the high enantioselectivity of lipases to prepare pure enantiomers of primary alcohols, but the molecular basis for this enantioselectivity is unknown. The crystal structures of two phosphonate transition-state analogs bound to Burkholderia cepacia lipase reveal this molecular basis for a typical primary alcohol: 2-methyl-3-phenyl-1-propanol. The enantiomeric alcohol moieties adopt surprisingly similar orientations, with only subtle differences that make it difficult to predict how to alter enantioselectivity. These structures, along with a survey of previous structures of enzyme bound enantiomers, reveal that binding of enantiomers does not involve an exchange of two substituent positions as most researchers assumed. Instead, the enantiomers adopt mirror-image packing, where three of the four substituents at the stereocenter lie in similar positions. The fourth substituent, hydrogen, points in opposite directions.     

Exfoliated graphite nanoplatelets and gold nanoparticles based electrochemical sensor for determination of levodopa

This paper describes a rapid, accurate, and sensitive method for the determination of levodopa in a pharmaceutical sample using a glassy carbon electrode modified with a hybrid nanocomposite constituted of exfoliated graphite nanoplatelets dispersed in a suspension of gold nanoparticles in carboxymethylcelullose (AuNP-CMC-xGnP/GCE). The nanocomposite was characterized by scanning electron microscopy, transmission electron microscopy, UV-Vis spectroscopy, and zeta potential. Electrochemical characterization of the proposed sensor by cyclic voltammetry and electrochemical impedance spectroscopy indicated that the nanocomposite used for the electrode modification facilitated electron transfer. Using square-wave voltammetry (SWV) under optimized conditions (0.50% (m/v) of AuNP-CMC-xGnP, 0.1 mol L^?1 sulfuric acid, frequency 30 Hz, pulse amplitude 50 mV, and scan increment 6.0 mV), the calibration curve showed a linear range for levodopa from 5 to 50 μmol L^?1, with a limit of detection of 0.5 μmol L^?1. The sensor demonstrated good repeatability and electrode-to-electrode repeatability, with relative standard deviations of 2 and 4%, respectively. The proposed method was successfully applied to quantify levodopa in a pharmaceutical sample by SWV, showing good accuracy. Recoveries of 98 to 107% demonstrated that the method is suitable for practical applications. Therefore, the proposed sensor represents a useful tool for rapid and accurate determination of levodopa.     

Bridging the Gap between the Direct and Hydrocarbon Pool Mechanisms of the Methanol‐to‐Hydrocarbons Process

After a prolonged effort over many years, the route for the formation of a direct carbon?carbon (C?C) bond during the methanol‐to‐hydrocarbon (MTH) process has very recently been unveiled. However, the relevance of the “direct mechanism”‐derived molecules (that is, methyl acetate) during MTH, and subsequent transformation routes to the conventional hydrocarbon pool (HCP) species, are yet to be established. This important piece of the MTH chemistry puzzle is not only essential from a fundamental perspective, but is also important to maximize catalytic performance. The MTH process was probed over a commercially relevant H‐SAPO‐34 catalyst, using a combination of advanced solid‐state NMR spectroscopy and operando UV/Vis diffuse reflectance spectroscopy coupled to an on‐line mass spectrometer. Spectroscopic evidence is provided for the formation of (olefinic and aromatic) HCP species, which are indeed derived exclusively from the direct C?C bond‐containing acetyl group of methyl acetate. New mechanistic insights have been obtained from the MTH process, including the identification of hydrocarbon‐based co‐catalytic organic reaction centers.