Asymmetric allylic alkylation of acyclic allylic ethers with organolithium reagents

A highly efficient, regio- and enantioselective Cu(I) /phosphoramidite-catalyzed asymmetric allylic alkylation of allyl ethers with organolithium reagents is reported. The use of organolithium reagents is essential for this catalytic C?C bond formation due to their compatibility with different Lewis acids. The versatility of allylic ethers under the copper-catalyzed reaction conditions with organolithium reagents is demonstrated in the shortest synthesis of (S)-Arundic acid.     

Novel poly(lactic acid)–poly(ethylene oxide) chain‐linked copolymer and its application in nano‐encapsulation

The work presented here investigates the synthesis of poly(lactic acid)–poly(ethylene oxide) diisocyanate chain‐linked copolymer, and its application in the nano‐encapsulation of bioactive compounds. Study was conducted on the effect of the type of chain‐linking agent, along with molecular weight, thermal properties and hydrophilic/hydrophobic behavior, through the methods of gel permeation chromatography, Fourier transform infrared spectroscopy–attenuated total reflectance, differential scanning calorimetry, light scattering, water uptake experimentation, and water contact angle measurements. Nanoparticle formation was performed via a single solvent evaporation process, and the particles obtained were characterized by dynamic light scattering and scanning electron microscopy. Results show the significantly enhanced molecular weight of the final product after the chain‐linking reaction (up to 300,000 g/mol), as well as the non‐linear nature of the sample due to broad polydispersity, ranging from 4–13. The final products exhibited glass transition temperatures of between 30 and 44 °C, while their crystalline quality was either significantly suppressed or a completely amorphous attribute was observed. Nanoparticles in the range of 300 nm that contained metazachlor were successfully prepared, and their releasing behavior exhibited first order release kinetics. A slower rate of release was observed in samples containing 4,4′‐methylenebis(phenyl isocyanate) as a chain‐linker. Copyright © 2014 John Wiley & Sons, Ltd.     

Local structure of core/shell nanocrystalline particles produced by surfactant-assisted ball milling of Fe powder in paraffin

Surfactant-assisted ball milling of the Fe powder in paraffin has been used for fabrication of core–shell nanocrystalline particles. The local atomic structure of the bulk and surface layers of the mechanically milled particles has been studied using X-ray absorption spectroscopic techniques with synchrotron radiation from the DORIS storage ring at DESY, Hamburg. Regardless of milling environment composition, the as-prepared powders were shown to be characterized by a significant drop in the EXAFS signal intensity and coordination numbers of the Fe–Fe pairs due to the formation of nanocrystalline state in the particles. It has been shown that an addition of perfluorononanoic acid as a surfactant has a more prominent effect on the structure of the shell layers. The effect is revealed as an appearance of light element atoms (O, F, C) in the local atomic environment of the Fe atoms due to formation of oxide, carbide and adsorbed structures of different types in the particle shell.     

Synthesis of Diels–Alder adducts of the quinolizidine alkaloids N-methylcytisine, (−)-leontidine,and (−)-thermopsine with N-phenylmaleimide

The Diels–Alder adducts of the quinolizidine alkaloids N-methylcytisine, (?)-leontidine, and (?)-thermopsine with N-phenylmaleimide have been synthesized. The structures and absolute configurations of the new asymmetric centers of the products were determined by NMR spectroscopy experiments, QC-calculations, and X-ray data.     

Phase transitions in crystals of protein amino acids with trapped drops of water solutions

It has been shown that the phase transitions observed at temperatures of about 250 K in crystals of protein amino acids and of their compounds grown from water solutions are related to drops of these solutions trapped by crystals in their growth.     

Green chromatography separation of analytes of greatly differing properties using a polyethylene glycol stationary phase and a low-toxic water-based mobile phase

A simple, rapid, and environmentally friendly HPLC method was developed and validated for the separation of four compounds (4-aminophenol, caffeine, paracetamol, and propyphenazone) with different chemical properties. A “green” mobile phase, employing water as the major eluent, was proposed and applied to the separation of analytes with different polarity on polyethylene glycol (PEG) stationary phase. The chromatography separation of all compounds and internal standard benzoic acid was performed using isocratic elution with a low-toxicity mobile phase consisting of 0.04 % (v/v) triethylamine and water. HPLC separation was carried out using a PEG reversed-phase stationary phase Supelco Discovery HS PEG column (15?×?4 mm; particle size 3 μm) at a temperature of 30 °C and flow rate at 1.0 mL min^?1. The UV detector was set at 210 nm. In this study, a PEG stationary phase was shown to be suitable for the efficient isocratic separation of compounds that differ widely in hydrophobicity and acid–base properties, particularly 4-aminophenol (log P, 0.30), caffeine (log P, ?0.25), and propyphenazone (log P, 2.27). A polar PEG stationary phase provided specific selectivity which allowed traditional chromatographic problems related to the separation of analytes with different polarities to be solved. The retention properties of the group of structurally similar substances (aromatic amines, phenolic compounds, and xanthine derivatives) were tested with different mobile phases. The proposed green chromatography method was successfully applied to the analysis of active substances and one degradation impurity (4-aminophenol) in commercial preparation. Under the optimum chromatographic conditions, standard calibration was carried out with good linearity correlation coefficients for all compounds in the range (0.99914–0.99997, n?=?6) between the peak areas and concentration of compounds. Recovery of the sample preparation was in the range 100?±?5 % for all compounds. The intraday method precision was determined as RSD, and the values were lower than 1.00 %.

On homology modeling of the M2 muscarinic acetylcholine receptor subtype

Twelve homology models of the human M₂ muscarinic receptor using different sets of templates have been designed using the Prime program or the modeller program and compared to crystallographic structure (PDB:3UON). The best models were obtained using single template of the closest published structure, the M₃ muscarinic receptor (PDB:4DAJ). Adding more (structurally distant) templates led to worse models. Data document a key role of the template in homology modeling. The models differ substantially. The quality checks built into the programs do not correlate with the RMSDs to the crystallographic structure and cannot be used to select the best model. Re-docking of the antagonists present in crystallographic structure and relative binding energy estimation by calculating MM/GBSA in Prime and the binding energy function in YASARA suggested it could be possible to evaluate the quality of the orthosteric binding site based on the prediction of relative binding energies. Although estimation of relative binding energies distinguishes between relatively good and bad models it does not indicate the best one. On the other hand, visual inspection of the models for known features and knowledge-based analysis of the intramolecular interactions allows an experimenter to select overall best models manually.     

A Comprehensive Study on the Full Series of Alkali-Metal Selenocyanates AI[SeCN] (AI=Li−Cs)

The full series of quasibinary alkali-metal selenocyanates was synthesized either by oxidation of the respective cyanides (A=Li−Rb) or by metathesis (A=Cs). For Li[SeCN] only ball-milling and subsequent annealing led to the isolation of the quasibinary selenocyanate. Their structures were refined from single-crystal and powder X-ray data. The respective solid-state IR and Raman spectra were interpreted with the aid of solid-state quantum-mechanical calculations and DSC-TGA measurements allowed for extraction of melting points. Only for Li[SeCN] a possible phase transition was observed that is discussed on the basis of VT-PXRD experiments. It is also the only quasibinary selenocyanate to form a hydrate (Li[SeCN] ⋅ 2H₂O).     

Separation of PCR-ready DNA from dairy products using magnetic hydrophilic microspheres and poly(ethylene glycol)-NaCl water solutions

Carboxyl group-containing magnetic nonporous poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) (P(HEMA-co-GMA)) and magnetic glass microspheres were used for the isolation of bacterial DNA. P(HEMA-co-GMA) microspheres were prepared by the dispersion polymerization in toluene/2-methylpropan-1-ol mixture in the presence of magnetite nanoparticles obtained by coprecipitation of Fe(II) and Fe(III) salts with ammonium hydroxide. Carboxyl groups were then introduced by oxidation of the microspheres with potassium permanganate. The most extensive DNA recovery was achieved at PEG 6000 concentrations of 12% or 16% and 2 M NaCl. The method proposed was used for bacterial DNA isolation from different dairy products containing Bifidobacterium and Lactobacillus cells. The presence of target DNA and the quality of isolated DNA were checked by polymerase chain reaction (PCR) amplification with specific primers.