Energetics of radical transfer in DNA photolyase

Charge separation and radical transfer in DNA photolyase from Escherichia coli is investigated by computing electrostatic free energies from a solution of the Poisson-Boltzmann equation. For the initial charge separation 450 meV are available. According to recent experiments [Aubert et al. Nature 2000, 405, 586-590] the flavin receives an electron from the proximal tryptophan W382, which consequently forms a cationic radical WH(*)(+)382. The radical state is subsequently transferred along the triad W382-W359-W306 of conserved tryptophans. The radical transfer to the intermediate tryptophan W359 is nearly isoenergetic (58 meV uphill); the radical transfer from the intermediate W359 to the distal W306 is 200 meV downhill in energy, funneling and stabilizing the radical state at W306. The resulting cationic radical WH(*)(+)306 is further stabilized by deprotonation, yielding the neutral radical W(*)306, which is 214 meV below WH(*)(+)306. The time scale of the charge recombination process yielding back the resting enzyme with FADH(*) is governed by reprotonation of W306, with a calculated lifetime of 1.2 ms that correlates well with the measured lifetime of 17 ms. In photolyase from Anacystis nidulans the radical state is partially transferred to a tyrosine [Aubert et al. Proc. Natl. Acad. Sci. U.S.A. 1999, 96, 5423-5427]. In photolyase from Escherichia coli, there is a tyrosine (Y464) close to the distal tryptophan W306 that could play this role. We show that this tyrosine cannot be involved in radical transfer, because the electron transfer from tyrosine to W306 is much too endergonic (750 meV) and a direct hydrogen transfer is likely too slow. Coupling of specific charge states of the tryptophan triad with protonation patterns of titratable residues of photolyase is small.     

Grafting of styrene onto low molecular weight polymers and copolymers of butadiene

The grafting of styrene onto low molecular weight polybutadienes and butadiene–styrene co-polymers was studied. A mathematical method was used for the design of experiments and for the determination of the optimum grafting conditions with respect to the conversion of styrene and the efficiency of grafting. The reaction parameters were temperature (65–105°C), time (2–10 hr), concentration of the initiator, polymer to monomer ratio (10/90–90/10) and dilution by solvent (toluene). The optimum grafting conditions were chosen under which 50–60 wt-% of styrene was grafted onto backbone polymer at a high conversion of the monomer. It was found that the reactions producing graft copolymer prevailed over the styrene homopolymerization when the temperatures employed were lower (65–85°C), and the reaction time (8–10 hr), backbone polymer/monomer ratio, and the dilution by solvent were higher. The efficiency, density, and degree of grafting were found to increase with the increase in the molecular weight of the backbone polymer. The efficiencies and densities of grafting onto low molecular weight polybutedienes were higher than those of grafting onto low molecular weight butadiene–styrene copolymers. Grafting efficiencies and grafting densities were in the ranges 37.8–61.6 wt % and 0.06–0.26, respectively, in the studied range of number-average molecular weights (M?_n = 2400–6000).     

Catalytic Kinetic Spectrophotometric Method for Determination of Phosphate Ion

The kinetic method for the determination of phosphate microamounts was described. The developed method is based on catalytic effect of phosphate on sodium pyrogallol-5-sulphonate （PS） by dissolved oxygen. The reaction was followed spectrophotometrically by measuring the rate of change in the values of the absorbance of the oxidation product at 437 nm. The optimum reaction conditions are PS （0.44×10^-3 mol·L^-1） and HClO4 （3.6×10^-6 mol·L^-1） at 25 ℃. Following this procedure, phosphate can be determined with a linear calibration graph up to 0.23 μg·mL^-1. The interference effect of several species was also investigated and it was found that the most common cations and anions did not interfere with the determination. The developed procedure was successfully applied to the determination of phosphate in natural waters and soil.     

Mechanistic Study on the Oxidation of Promazine and Chlorpromazine by Hexaimidazolcobalt(III) in Acidic Aqueous Media

The kinetics of the oxidation of promazine and chlorpromazine by hexaimidazolcobalt(III) were studied in the presence of a large excess of cobalt(III) and H⁺ ions using u.v.–vis. spectroscopy ([Co^III] = (1–6) × 10⁻³ m, [ptz] = (2.5–10) × 10⁻⁵ m, [H⁺] = 0.05–0.8 m, I = 1.0 m (H⁺, Na⁺, Cl⁻), T = 333–353 K, l = 1 cm). In each case, the reversible reaction leads to formation of cobalt(II) species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k_obs) on [Co^III] with a non-zero intercept was established for both phenothiazine derivatives. A marked difference in the observed reaction rate for promazine and chlorpromazine is associated with the difference in its ability to undergo oxidation and is consistent with a trend in the redox potential changes for these reductants. The activation parameters for reactions studied were determined. Mechanistic consequences of all the results are discussed.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

Thermal decomposition of metal polyacrylates

Results of thermal and pyrolysis-GC/MS analyses of Na, Ca and Mg polyacrylates are presented. It was confirmed that the main decomposition reactions of the Na salt take place in the temperature range 420 – 470 and those of the other two polymers in the range 450–490. It was found that the solid residue after decomposition was the metal carbonate or oxide, while the volatile products consisted of H₂, CO, CO₂, saturated and unsaturated hydrocarbons (including cycloolefins and aromatic hydrocarbons) and aliphatic ketones. This suggests that the thermal decomposition of the metal polyacrylates proceeds via side-chain splitting and breaking of the main chain of the polymer, without retropolymerization.

---

Zusammenfassung Die Ergebnisse der Thermo- und Pyrolyse-GC/MS-analysen von Na-, Ca- und Mg-Polyacrylaten werden beschrieben. Es wurde bestÄtigt, dass die Hauptzersetzungsreaktionen des Natriumsalzes im Temperaturbereich von 420 bis 470, jene der anderen zwei Polymeren im Bereich von 450 bis 490 ablaufen. Es wurde nach der Zersetzung ein fester Rückstand von Metallkarbonat oder -oxid gefunden, wÄhrend die flüchtigen Produkte aus N₂, CO, CO₂, gesÄttigten und ungesÄttigten Kohlenwasserstoffen (darunter Zykloolefinen und aromatischen Kohlenwasserstoffen) und aliphatischen Ketonen bestanden. Dies lÄsst darauf schliessen, dass sich die thermische Zersetzung der Metallpolyacrylate über die Abspaltung der Seitenkette und der Spaltung der Hauptkette des Polymers ohne Retropolymerisation vollzieht.

---

Résumé On présente les résultats des analyses thermiques et des produits de décomposition pyrolytique par chromatographie en phase gazeuse et spectrométrie de masse (GC/MS) des polyacrylates de Na, Ca et Mg. On confirme que la réaction de décomposition principale du sel de sodium a lieu entre 420 et 470 et celle des deux autres polymères entre 450 et 490. On trouve que le résidu solide après décomposition est le carbonate ou l'oxyde du métal, tandis que les produits volatils consistent en N₂, CO, CO₂, en hydrocarbures saturés et non-saturés (y compris les cyclooléfines et hydrocarbures aromatiques) et en cétones aliphatiques. Cela permet de supposer que la décomposition thermique des polyacrylates métalliques s'effectue par coupure de la chaÎne latérale et par rupture de la chaÎne principale du polymère, sans rétropolymérisation.

---

-- -- Na, Ca Mg. , 420–470, — 450–490. , . H₂, CO, CO₂, , , . , .

     

A Stopped-flow Study on the Kinetics and Mechanism of CO2 Uptake by the cis-[Cr(1,10-phenanthroline)2(OH2)2]3+ Complex Ion

The kinetics of the reaction between gaseous CO₂ and the cis-[Cr(phen)₂(OH₂)₂]³⁺ ion leading to the formation of the carbonato complex ion, have been studied over the pH and temperature ranges: 3 < pH < 6 and 5 < T < 25 °C, respectively, at a constant ionic strength of 1 m (NaClO₄). Investigations were carried out using the stopped-flow spectrophotometry technique in the UV–Vis range: 340–700 nm. The major reactant species in the pH range studied was cis-[Cr(phen)₂(OH)(OH₂)]²⁺ ion, which underwent reaction with CO₂ to form cis-[Cr(phen)₂(OH₂)(HCO₃)]²⁺ ion. Subsequently, slower ring closure of the latter species to form the bidentate carbonato chelate was observed. The possible mechanism has been discussed and the activation parameters ΔH^† and ΔS^† were also determined for the reaction studied.     

Magnon spectrum and curie temperature of doped ferromagnetic semiconductors

The influence of a partially filled conduction band on the magnetic properties of ferromagnetic semiconductors is studied within the framework of thes-f model. Allowing for magnon scattering to arbitrary order in the form of virtual electron- holecreation the magnon spectral density is derived, from which one gets magnon energies which are substantially renormalized by the presence of conduction electrons. In particular it is shown how the quasiparticle structure of the electronic excitation energies [4, 5] leads to scattering corrections in the magnon spectrum. These corrections are always negative and reduce the positive mean field part, which is proportional to the electron densityn. The calculated magnon spectrum is then used to determine the strikingn-dependence of the Curie-temperatureT _c of Gd-doped EuO and EuS.     

Electrosorption of hydrogen into palladium-gold alloys

Hydrogen electrosorption into Pd-Au alloys has been studied in acidic solutions (1 M H₂SO₄) using cyclic voltammetry. Pd-Au electrodes with limited volume were prepared by electrochemical co-deposition. It was found that the maximum H/(Pd+Au) ratios decrease monotonically with increasing gold content and reach zero at ca. 70 at% Au. Similarly to the case of Pd limited volume electrodes, two peaks in the hydrogen region, corresponding to two types of sorbed hydrogen, are observed on voltammograms for Pd-rich alloys. The hydrogen capacity, H/(Pd+Au), measured electrochemically, depends on the sweep rate in the cyclic voltammetry experiments, which suggests that two different mechanisms for hydrogen desorption from the Pd-Au alloy are possible. After a strong decrease of Pd concentration at the electrode surface, caused by long cyclic polarization to sufficiently anodic potentials, the amount of absorbed hydrogen is still significant for alloys initially rich in Pd. The results obtained from CO adsorption experiments suggest that only Pd atoms are active in the hydrogen absorption/desorption process. Electronic Publication