Effect of extractant on arsenic(V) recovery from sulfuric acid solutions

Extraction of arsenic(V) from sulfuric acid solutions with various extractants in multistage counter-current extraction-stripping systems was compared. The extraction ability of the extractants studied showed the following order: ENIM 100>TBP=CYANEX 923>2-methylhexanol. The extraction depends significantly on the number of extraction stages and the phase ratios in extraction. The effects of the number of stripping stages and the phase ratio in stripping are less important.     

Flotation—spectrophotometric determination of osmium with thiocyanate and methylene blue

A sensitive flotation—spectrophotometric method, based on the ion associate formed by the anionic thiocyanate complex of osmium with the basic dye methylene blue (MB) is described. The ion associate precipitates when the aqueous solution is shaken with toluene, and the separated and washed compound is dissolved in acetone. The molar absorptivity is 2.2 × 10⁵ l mol^-1 cm^-1 at 655 nm. Beer's law is obeyed. The molar ratio of Os:SCN:MB in the separated and washed ion associate is 1:6:3. Ruthenium reacts similarly. The method is applied to the determination of traces of osmium in crucible platinum after separation of osmium by distillation as tetroxide.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

Improvement in the synthesis of metallophthalocyanines using microwave irradiation

A successful application of microwave irradiation, in which phthalocyanines were synthesized under solventless conditions from 1,2-phthalonitrile or phthalic anhydride and urea in the presence of metal templates is described. It was found that in comparison with conventional heating, the microwave process is a very useful alternative for cyclotetramerization processes because of reduction of the reaction time, better yield, and easy-to-perform procedure.     

Novel design of a pentacyclic scaffold as structural mimic of saframycin A

The design, synthesis and evaluation of a pentacyclic scaffold, CWO-324 to mimic saframycin A is described. CWO-324 is readily synthesized in five steps from 1,4-diacetyl-piperazine-2,5-dione and 2,5-dimethoxybenzaldehyde. CWO-324 was found to scission DNA, binds to bases 69-83(5′-GCAGTCAGG CACCGT-3′) of Hind III/Rsa I from plasmid pBR322 DNA in a foot-printing study and possesses anti-tumor activity.     

Studies on the copolymerization of unsaturated 1,3-dioxane derivatives—IV. Radical copolymerization of 2-furyl-5,5-dimethyl-1,3-dioxane with maleic anhydride

The copolymerization of 2-furyl-5,5-dimethyl-1,3-dioxane with maleic anhydride in the presence of a radical catalyst yields equimolar, alternating copolymers in which the furyl units have 2,5-linkage. It has been shown that 2-furyl-5,5-dimethyl-1,3-dioxane forms a charge transfer complex with maleic anhydride. The equilibrium constant for the complex was determined by NMR spectroscopy.     

An efficient reagent for the phosphorylation of deoxyribonucleosides, DNA oligonucleotides, and their thermolytic analogues

[reaction: see text] The phosphoramidite 11 was prepared in three steps from methyl 2-mercaptoacetate and demonstrated efficiency in the synthesis of conventional 5'-/3'-phosphate/thiophosphate monoester derivatives of 2'-deoxyribonucleosides and DNA oligonucleotides. Moreover, the use of 11 has enabled the preparation of the dinucleoside phosphorothioate analogue 26 in high yields (>95%) with minimal cleavage (<2%) of the thermolytic thiophosphate protecting group.     

Determination of total carbon and total organic carbon from volatile air pollutants. Part I

Summary A new method of collection of representative air samples for the determination of TC and TOC from volatile air pollutants has been developed. The organic substances undergo combustion and only the carbon dioxide produced is concentrated on molecular sieve 5 A at ambient temperature. The CO₂ is subsequently liberated by thermal desorption at ca. 380°C in a stream of purified gas. Atmospheric CO₂ must be removed first and this can be done (at the sample flow rate of 700 ml/min) by a layer of Ascarite heated at 90° C. Organic compounds passing through the layer are then combusted by a dynamic method utilizing Körbl catalyst and the CO₂ formed is concentrated on a molecular sieve 5 A, followed by thermal desorption and final determination. Organic acids are also retained by the first CO₂ absorber. A diffusion cell for preparation of the mixtures of purified air with vapours of organic compounds is described.

---

Zusammenfassung Eine neue Anreicherungsmethode zur Gewinnung representativer Luftproben zur Bestimmung des Gesamtkohlenstoffgehaltes und des Gehaltes an organischem Kohlenstoff (TOC) aus flüchtigen Luftverunreinigungen wurde entwickelt. Während der Probenahme werden die flüchtigen Verunreinigungen verbrannt und nur das entstandene Kohlendioxid bei Zimmertemperatur am Molekularsieb 5A angereichert. Anschließend wird CO₂ bei ca. 380° C im gereinigten Gasstrom thermisch desorbiert. Bei der TOC-Bestimmung muß atmosphärisches CO₂ vorangehend aus dem Luftstrom entfernt werden und wird an einer auf 90° C erwärmten Ascariteschicht gebunden. Die durchfließenden organischen Verbindungen werden dann im dynamischen System am Körblkatalysator oxydiert, das entstandene CO₂ am Molekularsieb 5A angereichert, thermisch desorbiert und einer Endbestimmung zugeführt. Organische Säuren werden gleichfalls durch den ersten CO₂-Absorber gebunden. Eine Diffusionszelle zur Herstellung von Gemischen gereinigter Luft mit Dämpfen organischer Verbindungen wurde beschrieben.

     

Determination of subnanomolar concentrations of cobalt by adsorptive stripping voltammetry at a bismuth film electrode

Procedures for trace cobalt determinations by adsorptive stripping voltammetry at in situ and ex situ plated bismuth film electrodes are presented. These exploit the enhancement of the cobalt peak obtained by using the Co(II)–dimethylglyoxime–cetyltrimethylammonium bromide–piperazine-N,N-bis(2-ethanesulfonic acid) system. The calibration graph for an accumulation time of 120 s was linear from 2 × 10^–10 to 2 × 10^–8 mol L^–1. The relative standard deviation from five determinations of cobalt at a concentration of 5 × 10^–9 mol L^–1 was 5.2%. The detection limit for an accumulation time of 300 s was 1.8 × 10^–11 mol L^–1. The proposed procedure was applied to cobalt determination in certified reference materials and in tap and river water samples.     

Analytical control of silica glass production. Voltammetric determination of titanium and iron in raw materials and silica glass samples

Adsorptive stripping voltammetric (AdSV) methods are presented for the determination of titanium and iron in quartz and silica glass samples obtained after pressure decomposition. Mandelic acid and catechol were used as complexing agents for titanium and iron, respectively. The method for titanium determination is based on the catalytic effect of chlorate ions. An insoluble residue remaining after decomposition of quartz and silica glass samples in HF+H2SO4 mixture was checked by energy-dispersive X-ray analyses. ET-AAS was applied as a reference method to AdSV measurements.