Determination of subnanomolar concentrations of cobalt by adsorptive stripping voltammetry at a bismuth film electrode

Procedures for trace cobalt determinations by adsorptive stripping voltammetry at in situ and ex situ plated bismuth film electrodes are presented. These exploit the enhancement of the cobalt peak obtained by using the Co(II)–dimethylglyoxime–cetyltrimethylammonium bromide–piperazine-N,N-bis(2-ethanesulfonic acid) system. The calibration graph for an accumulation time of 120 s was linear from 2 × 10^–10 to 2 × 10^–8 mol L^–1. The relative standard deviation from five determinations of cobalt at a concentration of 5 × 10^–9 mol L^–1 was 5.2%. The detection limit for an accumulation time of 300 s was 1.8 × 10^–11 mol L^–1. The proposed procedure was applied to cobalt determination in certified reference materials and in tap and river water samples.     

Thiyl radical interaction with pyrimidine C5-C6 double bond

Addition and elimination interaction of thiyl radicals with the C5-C6 double bond in pyrimidines was studied by the pulse radiolysis technique in aqueous solution with the use of different monitoring systems. For this purpose, p-thiocresol, cysteamine hydrochloride, and mercaptoethanol were used. The rate constants of addition and elimination of thiyl radicals were determined by applying the modified version of ACUCHEM (computer program for modeling complex reaction systems). Aliphatic thiyl radicals add to the pyrimidine C5-C6 double bond with k = 1.0-3.0 x 10(7) dm3 mol(-1) s(-1), whereas elimination takes place with k = 0.7-2.0 x 10(5) s(-1). Quantum chemical calculations at the B3LYP/6-31G(d)/PCM level show that the addition should occur at the C6 position of the pyrimidine ring and that the energy of interaction between thiyl radicals and the pyrimidine double bond C5-C6 is low.     

Asymmetry of electron transmission through monolayers of helical polyalanine adsorbed on gold surfaces

Polyalanine derivatives containing cysteamine linker R-(Ala)14NH-(CH2)2-SH, where R is ferrocenecarbonyl or hydrogen, were synthesized and then used to form self-assembled monolayers on gold. The tilt angles and the packing density of the molecules within monolayer assemblies were determined by FTIR spectroscopy and scanning tunneling microscopy, respectively. Electrochemical properties of monolayer-modified electrodes were studied using cyclic voltammetry and impedance spectroscopy. Measurements of electron-transfer rates using electrochemical techniques and scanning tunneling spectroscopy revealed asymmetry dependent on the applied voltage. It is suggested that the observed electron-transfer behavior is connected with the electric field generated by the molecular dipole of the polyalanine helix.     

Improvement in the synthesis of metallophthalocyanines using microwave irradiation

A successful application of microwave irradiation, in which phthalocyanines were synthesized under solventless conditions from 1,2-phthalonitrile or phthalic anhydride and urea in the presence of metal templates is described. It was found that in comparison with conventional heating, the microwave process is a very useful alternative for cyclotetramerization processes because of reduction of the reaction time, better yield, and easy-to-perform procedure.     

A Porous Sulfonated 2D Zirconium Metal–Organic Framework as a Robust Platform for Proton Conduction

By using the strategy of pre-assembly chlorosulfonation applied to a linker precursor, the first sulfonated zirconium metal–organic framework ( JUK-14 ) with two-dimensional (2D) structure, was synthesized. Single-crystal X-ray diffraction reveals that the material is built of Zr₆O₄(OH)₄(COO)₈ oxoclusters, doubly 4-connected by angular dicarboxylates, and stacked in layers spaced 1.5 nm apart by the presence of sulfonic groups. JUK-14 exhibits excellent hydrothermal stability, permanent porosity confirmed by gas adsorption studies, and shows high (>10⁻⁴ S/cm) and low (<10⁻⁸ S/cm) proton conductivity under humidified and anhydrous conditions, respectively. Post-synthesis inclusion of imidazole improves the overall conductivity increasing it to 1.7×10⁻³ S/cm at 60 °C and 90 % relative humidity, and by 3 orders of magnitude at 160 °C. The combination of 2D porous nature with robustness of zirconium MOFs offers new opportunities for exploration of the material towards energy and environmental applications.     

3D X-ray Micro-CT Analysis of Rebar Corrosion in Reinforced Concrete Subjected to a Chloride-Induced Environment

The paper presents experimental investigations of the concrete covers’ protective ability to counteract rebar corrosion in reinforced concrete cubes. The concrete sample was subjected to a chloride-induced environment to get corroded and combined with an un-corroded sample. The chloride-accelerated technique can induce a high degree of corrosion within a controlled time. Moreover, detailed and thorough experimental measurements and analyses of reinforcement loss due to corrosion and its influence on concrete microstructure, were studied through 3D X-ray micro-computed tomography. The rebar outside the concrete was heavily corroded due to the chloride-accelerated test, whereas, only local surface corrosion products appeared inside the concrete. It turned out that the concrete cover showed protective ability to counteract the reinforcing-steel corrosion mechanism despite the accelerated corrosion environment. Moreover, the bond strength between the reinforcement rebar and concrete was not visibly affected since the failure force in the pull-out test and failure mechanisms, observed by 3D X-ray micro-CT, were similar for corroded and un-corroded samples. The failure occurred due to radial cracks with a maximum width equal to approximately 0.25 mm.     

Polyphenolic Composition and Antioxidant Activity (ORAC,EPR and Cellular) of Different Extracts of Argylia radiata Vitroplants and Natural Roots

Plant biochemistry studies have increased in recent years due to their potential to improve human health. Argylia radiata is an extremophile plant with an interesting polyphenolic profile. However, its biomass is scarce and occasionally available. Argylia in vitro biomass was obtained from tissue culture and compared with in vivo roots regarding its polyphenolic and flavonoid content. Different solvents were used to prepare extracts from the in vitro tissue of callus and aerial plant organs and in vivo roots. UPLC-MS/MS was used to assess the chemical composition of each extract. ORAC-FL and scavenging of free radicals (DPPH and OH) methods were used to determine the antioxidant capacity of extracts. Furthermore, the biological activity of the extracts was established using the cellular antioxidant activity method. The vitroplants were a good source of polyphenols (25–68 mg GAE/100 g tissue FW), and methanol was the most efficient solvent. Eight polyphenolic compounds were identified, and their antioxidant properties were investigated by different chemical methods with EPR demonstrating its specific scavenging activity against free radicals. All extracts showed cellular dose-dependent antioxidant activity. The methanolic extract of vitroplants showed the highest cellular antioxidant activity (44.6% and 51%) at 1 and 10 µg/mL of extract, respectively. Vitroplants of A. radiata are proposed as a biotechnological product as a source of antioxidant compounds with multiple applications.     

The Influence of Synthesis Conditions on the Antioxidant Activity of Selenium Nanoparticles

Selenium nanoparticles (SeNPs) have attracted great attention in recent years due to their unique properties and potential bioactivities. While the production of SeNPs has been long reported, there is little news about the influence of reaction conditions and clean-up procedure on their physical properties (e.g., shape, size) as well as their antioxidant activity. This study takes up this issue. SeNPs were synthesized by two methods using cysteine and ascorbic acid as selenium reductants. The reactions were performed with and without the use of polyvinyl alcohol as a stabilizer. After the synthesis, SeNPs were cleaned using various procedures. The antioxidant properties of the obtained SeNPs were investigated using DPPH and hydroxyl radical scavenging assays. It was found that their antioxidant activity does not always depend only on the nanoparticles size but also on their homogeneity. Moreover, the size and morphology of selenium nanoparticles are controlled by the clean-up step.     

Comparison of human blood serum DSC profiles in aqueous and PBS buffer solutions

Journal of Thermal Analysis and Calorimetry - The results of studies of physiological fluids by differential scanning calorimetry (DSC) for the purpose of diagnosis and monitoring of diseases are...     

Poly[[pentaaquasulfato‐μ4‐(R,R)‐tartrato‐dicadmium(II)] trihydrate]

The asymmetric unit in the title compound, {[Cd₂(C₄H₄O₆)(SO₄)(H₂O)₅]·3H₂O}_n, is composed of two cadmium cations, one (R,R)‐tartrate and one sulfate anion, five aqua ligands and three solvent water molecules. One of the cadmium ions is coordinated in an octahedral environment, whereas the second is surrounded by seven O atoms in a pentagonal–bipyramidal geometry. Both types of coordination polyhedra form two sets of perpendicular non‐intersecting polymeric chains. CdO₆ octahedra share two corners, while CdO₇ units are joined by a bridging carboxylate group. An extensive hydrogen‐bond pattern involving all of the OH groups contributes to the stabilization of the structure.