Structural reinvestigation of ammonium hypophosphite: was dihydrogen bonding observed long ago?

The past decade has seen the explosive emergence of "dihydrogen bonds", interactions between the electrons of M-H sigma-bonds, where M is less electronegative than H (M = Al, B, Ga, Ir, Mo, Mn, Os, Re, Ru, W) and traditional proton donors. But 70 years ago, such an interaction was proposed by Zachariasen and Mooney [J. Chem. Phys. 1934, 2, 34-37] on the basis of their single-crystal X-ray diffraction structure (heavy atoms positions only) of ammonium hypophosphite (NH(4)H(2)PO(2)). We redetermined this structure at high resolution with a focus on the hydrogen atoms, using a modern diffractometer equipped with a CCD detector. Molecular orbital calculations were performed to investigate the charge density and the bond polarity of the P-H bonds and to assess their potential for participation in dihydrogen bonds. Neither the theory nor the X-ray structure supports the original claim of H...H interactions in this salt.     

Assessment of role of rosmarinic acid in preventing oxidative process of low density lipoproteins

This study aimed to assess the antioxidant compound effects on oxidisable substrates, using an effective bio-mimetic system based on human low density lipoproteins (LDL). Thermally generated radicals induce LDL oxidative changes to be identified and quantified. The bio-mimetic system thus developed responded linearly to radicals?? concentration over a range of 10^?6-10^?5 mol L^?1. Cu²⁺ accentuates lipoperoxidation but, when rosmarinic acid was present, Cu²⁺ produced an unexpected effect, i.e. increased antioxidant efficiency against lipoperoxidation. Rosmarinic acid inhibits production of lipoperoxides by up to 30 % in the absence of Cu²⁺ and up to 70 % in its presence when the rosmarinic acid-to-Cu molar ratio is 1: 1.     

Microstructural impact of anodic coatings on the electrochemical chlorine evolution reaction

Sol-gel Ru(0.3)Sn(0.7)O(2) electrode coatings with crack-free and mud-crack surface morphology deposited onto a Ti-substrate are prepared for a comparative investigation of the microstructural effect on the electrochemical activity for Cl(2) production and the Cl(2) bubble evolution behaviour. For comparison, a state-of-the-art mud-crack commercial Ru(0.3)Ti(0.7)O(2) coating is used. The compact coating is potentially durable over a long term compared to the mud-crack coating due to the reduced penetration of the electrolyte. Ti L-edge X-ray absorption spectroscopy confirms that a TiO(x) interlayer is formed between the mud-crack Ru(0.3)Sn(0.7)O(2) coating and the underlying Ti-substrate due to the attack of the electrolyte. Meanwhile, the compact coating shows enhanced activity in comparison to the commercial coating, benefiting from the nanoparticle-nanoporosity architecture. The dependence of the overall electrode polarization behaviour on the local activity and the bubble evolution behaviour for the Ru(0.3)Sn(0.7)O(2) coatings with different surface microstructure are evaluated by means of scanning electrochemical microscopy and microscopic bubble imaging.     

Multiple positive solutions of non-local initial value problems for first order differential systems

The paper gives a new and natural method for the existence of multiple positive solutions for first order differential systems with non-local initial value conditions involving linear functionals. The case of higher order differential equations is also considered. The results are accompanied by numerical examples confirming the theory and proving for practice the importance of the bounds in solution localization.     

Linkage isomerism in nitrite reduction by cytochrome cd1 nitrite reductase

Nitrite reduction by cytochrome cd(1) nitrite reductase (cd(1)NIR) is currently accepted to involve coordination of the nitrite nitrogen atom to the ferrous d(1) heme. Here, density functional theory results are reported on the previously unexplored O-binding of nitrite to ferrous and ferric cd(1)NIR. Although the N-isomer (nitro) is energetically favored over the O-nitrite (nitrito), even one single strong hydrogen bond may provide the energy required to put the two isomers on level terms. When hydrogen bonding existent at the cd(1)NIR active site is accounted for in the computational model, the O-nitrite isomer is found to spontaneously protonate and thus yield a ferric-hydroxo species, liberating nitric oxide. An O-nitrite ferrous cd(1)NIR complex appears to be an energetically feasible intermediate for nitrite reduction. O-Coordination would offer an advantage since the end product of nitrite reduction would be a ferric-hydroxo/water complex, rather than the more kinetically inert iron-nitrosyl complex implied by the N-nitrite mechanism.     

Comparison of luminescence ADP production assay and radiometric scintillation proximity assay for Cdc7 kinase

Several assay technologies have been successfully adapted and used in HTS to screen for protein kinase inhibitors; however, emerging comparative analysis studies report very low hit overlap between the different technologies, which challenges the working assumption that hit identification is not dependent on the assay method of choice. To help address this issue, we performed two screens on the cancer target, Cdc7-Dbf4 heterodimeric protein kinase, using a direct assay detection method measuring [(33)P]-phosphate incorporation into the substrate and an indirect method measuring residual ADP production using luminescence. We conducted the two screens under similar conditions, where in one, we measured [(33)P]-phosphate incorporation using scintillation proximity assay (SPA), and in the other, we detected luminescence signal of the ATP-dependent luciferase after regenerating ATP from residual ADP (LUM). Surprisingly, little or no correlation were observed between the positives identified by the two methods; at a threshold of 30% inhibition, 25 positives were identified in the LUM screen whereas the SPA screen only identified two positives, Tannic acid and Gentian violet, with Tannic acid being common to both. We tested 20 out of the 25 positive compounds in secondary confirmatory study and confirmed 12 compounds including Tannic acid as Cdc7-Dbf4 kinase inhibitors. Gentian violet, which was only positive in the SPA screen, inhibited luminescence detection and categorized as a false positive. This report demonstrates the strong impact in detection format on the success of a screening campaign and the importance of carefully designed confirmatory assays to eliminate those compounds that target the detection part of the assay.     

New Method for Theoretical Spinodals Corresponding to Ternary Solutions with an Amphiphile Component

A new method is presented to obtain a theoretical spinodal for ternary solutions with an amphiphile component. This method uses a generalized Wheeler-Widom model representing the ternary solution, and considers local fitting conditions with the experimental binodal, imposing that the theoretical binodal must pass through a point on the experimental binodal, and also that the slope of the theoretical binodal has to be as close as possible to the slope of the representative experimental binodal. Using the previously specified fitting conditions, the corresponding spinodal is derived. The results are in agreement with an older method of local fitting between the generalized Wheeler-Widom model and the experimental data, where the fitting condition implied the coincidence of the theoretical tie-line with the experimental tie-line.     

Decomposing total IR spectra of aqueous systems into solute and solvent contributions: a computational approach using maximally localized Wannier orbitals

The theoretical principles underpinning the calculation of infrared spectra for condensed-phase systems in the context of ab initio molecular dynamics have been recently developed in literature. At present, most ab initio molecular dynamics calculations are restricted to relatively small systems and short simulation times. In this paper we devise a method that allows well-converged results for infrared spectra from ab initio molecular dynamics simulations using small systems and short trajectories characteristic of simulations typically performed in practice. We demonstrate the utility of our approach by computing the imaginary part of the dielectric constant epsilon"(omega) for H2O and D2O in solid and liquid phases and show that it compares well with experimental data. We further demonstrate that maximally localized Wannier orbitals can be used to separate the individual contributions of different molecular species to the linear spectrum of complex systems. The new spectral decomposition method is shown to be useful in present-day ab initio molecular dynamics calculations to compute the magnitude of the "continuous absorption" generated by excess protons in aqueous solutions with good accuracy even when other species present in the solutions absorb strongly in the same frequency window.     

A Bound of the Finslerian Ricci Scalar

In the Riemannian as well as in the Finslerian geometry, certain conditions on the Ricci scalar or the Ricci tensor provide obstructions on the topology of the base manifold and so on the configuration of cut points by limitations of the injectivity radius, see the Bonnet–Myers theorem and its variants and generalizations. In this paper, we show that conversely, prescribing the injectivity radius of a Finsler manifold, some limitations of the Ricci scalar are obtained. Some consequences of the condition that the Ricci tensor is h-parallel with respect to the Chern–Rund connection are found. In addition, some classes of examples are provided.     

Separation and determination of arsenic species in water by selective exchange and hybrid resins

A simple and efficient method for separation and determination of inorganic arsenic (iAs) and organic arsenic (oAs) in drinking, natural and wastewater was developed. If arsenic is present in water prevailing forms are inorganic acids of As(III) and As(V). oAs can be found in traces as monomethylarsenic acid, MMA(V), and dimethylarsenic acid, DMAs(V). Three types of resins: a strong base anion exchange (SBAE) and two hybrid (HY) resins: HY-Fe and HY-AgCl, based on the activity of hydrated iron oxides and a silver chloride were investigated. It was found that the sorption processes (ion exchange, adsorption and chemisorptions) of arsenic species on SBAE (ion exchange) and HY resins depend on pH values of water. The quantitative separation of molecular and ionic forms of iAs and oAs was achieved by SBAE and pH adjustment, the molecular form of As(III) that exists in the water at pH <8.0 was not bonded with SBAE, which was convenient for direct determination of As(III) concentration in the effluent. HY-Fe resin retained all arsenic species except DMAs(V), which makes possible direct measurements of this specie in the effluent. HY-AgCl resin retained all iAs which was convenient for direct determination of oAs species concentration in the effluent. The selective bonding of arsenic species on three types of resins makes possible the development of the procedure for measuring and calculation of all arsenic species in water. In order to determine capacity of resins the preliminary investigations were performed in batch system and fixed bed flow system. Resin capacities were calculated according to breakthrough points in a fixed bed flow system which is the first step in designing of solid phase extraction (SPE) module for arsenic speciation separation and determination. Arsenic adsorption behavior in the presence of impurities showed tolerance with the respect to potential interference of anionic compounds commonly found in natural water. Proposed method was established performing standard procedures: with external standard, certified reference material and standard addition method. Two analytical techniques: the inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectroscopy-hydride generation (AAS-GH) were comparatively applied for the determination of arsenic in all arsenic species in water. ICP-MS detection limit was 0.2 μg L⁻¹ and relative standard deviation (RSD) of all arsenic species investigated was between 3.5 and 5.1%.