Simultaneous determination of angiotensins II and 1-7 by capillary zone electrophoresis in plasma and urine from hypertensive rats

We describe the procedure developed for the simultaneous detection and quantification of angiotensin II and angiotensin-(1-7), by capillary zone electrophoresis with UV detection by photodiode-array, at a wavelength of 200 nm, in the plasma and urine from hypertensive rats. Optimal separation was achieved with a 100 mM boric acid + 3 mM tartaric acid + 10 fM gold (III) chloride electrolyte solution at pH 9.80. The applied voltage was 30 kV and the capillary temperature was kept constant at 20 °C. The method was over the concentration range of 0.01-500 pmol/mL. All determination coefficients were higher or equal to 0.9985. Limits of detection and quantification for angiotensin II were 0.0110 pmol/mL (S/N = 3) and 0.0195 pmol/mL (S/N = 5), respectively. While for angiotensin-(1-7), the limits were 0.0112 pmol/mL (S/N = 3) and 0.0193 pmol/mL (S/N = 5), respectively. The present method offers a time-saving way to simultaneous determination of angiotensin II and angiotensin-(1-7), since it can be completed in 10 min, compared to other methodologies reported in the literature for capillary electrophoresis and liquid chromatography, which require more than 1 h for analysis of complex matrices, such as plasma and urine. The procedure is illustrated by experiments that quantify simultaneously angiotensin II and angiotensin-(1-7) in plasma and urine from hypertensive and normotensive rats, with and without antihypertensive treatment. The levels of angiotensin II and angiotensin-(1-7) detected in the experimental model, resulted in a recovery of 99.00-106.01% and a reproducibility of less than 10%. The proposed analytical method is a use full tool for the simultaneous detection of angiotensin II and angiotensin-(1-7) implicated in vascular remodeling in pathologies such as hypertension.     

General correlation model for some physical properties of saturated pure fluids

In this work, we use a general expression to accurately correlate the liquid density, the vaporization enthalpy, the surface tension, and the isobaric heat capacity of a saturated liquid versus temperature along the whole coexistence curve. The general expression used is the same for the four thermodynamic properties, and uses both critical and triple point values as reference. As representative examples of the use of the model, results are given for a set of 22 pure substances. We find that this general expression correlates the data with smaller or similar overall deviations when compared with other published models whose number of coefficients are the same or greater.     

Allenylzincs and tert-butylsulfinylimines: a fruitful marriage for synthesis

The stereoselective synthesis of alkynyl 1,2-amino alcohols by the addition of 3-chloro- and 3-methoxymethoxy- allenylzincs to chiral tert-butylsulfinylimines is described. The methodology is applicable to the preparation of alkynyl 2-amino-1,3-diols (O,N,O stereotriads) using α-alkoxy tert-butylsulfinylimines as chiral starting materials. The scope and limitations of the methodology along with recent applications to the efficient asymmetric syntheses of natural and/or bioactive alkaloids and polyhydroxylated alkaloids are presented.     

Synthesis of quinine and quinidine using sulfur ylide-mediated asymmetric epoxidation as a key step

The epoxidation of meroquinene aldehyde with a chiral sulfur ylide as the key step in the synthesis of quinine and quinidine is described. The epoxidation reactions proceed under reagent control with high selectivity and good yield. The effect of sulfide and ylide substituents on the stereochemical outcome of the reaction is discussed.     

Crystallization and Physical Ageing of Poly (2-vinyl pyridine)-b-poly(ethylene oxide) Diblock Copolymers

Summary: A set of melt miscible Poly(2-vinyl pyridine)-b-Poly(ethylene oxide) (P2VP-b-PEO) block copolymers of different compositions were studied. Transmission electron microscopy shows phase separation in the materials during the crystallization process of the PEO block as crystalline lamellae are observed for all compositions evaluated. The isothermal crystallization kinetics of PEO is progressively retarded as the P2VP content in the copolymer increases, since P2VP hinders molecular mobility in the miscible amorphous phase. Polarized light optical microscopy demonstrated that the glassy P2VP block has a negative effect on the secondary nucleation of the PEO. Finally, physical ageing experiments performed in the glassy state of the amorphous mixed phase, at different ageing times, demonstrated that a nucleating effect can be induced in the glassy state as a consequence of the reorganization of the amorphous regions. This nucleating effect significantly alters the cold crystallization rate upon subsequent heating above the glass transition temperature.     

Comparison Between Different Syntesis Methods of PMMA/HA Using Ultrasonic Radiation

Summary: The use of PMMA as dental and osseous cement and also in the fabrication of intraocular lenses has been widely reported. The combination of its excellent properties with those of hydroxyapatite (HA) to form a composite material, can result in very interesting properties as a biomaterial. The key is to obtain a good filler dispersion and interface bonding. Ultrasonic radiation seems to be a very versatile method for the synthesis of these materials, since the use of conventional initiators can be avoided, the filler dispersion improved and the interface interaction can be promoted. In the present work PMMA/HA composite materials were prepared by three different synthesis routes using ultrasonic radiation, in order to study the effect of the synthesis method on the final microstructure. Method I : in situ synthesis of PMMA and HA, under ultrasonic radiation by emulsion polymerization of MMA and HA precursors. Method II : in situ synthesis of HA, (from its precursors) by high frequency ultrasound in commercial PMMA solution Method III : in situ polymerization of MMA under high frequency ultrasonic radiation and adding HA to the solution and Method IV Mixing of hydroxyapatite nanocrystals, in different proportions, in a solution of commercial PMMA, by different periods from 10 min to 7 h, under low frequency (conventional) ultrasonic radiation, to compare the effect of high frequency and conventional ultrasound radiation. The different materials were characterized by FTIR, SEM, TEM, DRX, ¹H NMR and TGA. The results showed that, all the composites prepared by in situ synthesis showed an interaction between HA and PMMA, manifested by a bonding of the phosphate groups with the polar groups of the polymer matrix observed by FTIR. On the other hand, when the synthesis was carried out simultaneously adding HA and PMMA precursors a inhibition of the polymerization reaction of MMA was observed.     

Ethylbenzene to chemicals: Catalytic conversion of ethylbenzene into styrene over metal-containing MCM-41

Isomorphously substituted (MeDM) and impregnated metal-containing MCM-41 (MeO_x/IM) catalysts, in which Me = Co, Cu, Cr, Fe or Ni, have been prepared. Structural and textural characterizations of the catalysts were performed by means of X-ray diffraction (XRD), chemical analysis, Raman spectroscopy, electron paramagnetic resonance (EPR), N₂ adsorption isotherms and temperature programmed reduction (TPR). Cu²⁺, Co²⁺, and Cr⁴⁺/Cr³⁺ species were found over the catalysts as cations incorporated in the MCM-41 structure (MeDM) or highly dispersed oxides on the surface (MeO_x/IM). The MeDM catalysts exhibited a good performance in the dehydrogenation of ethylbenzene with CO₂. However, MeO_x/IM catalysts had a low performance in styrene production (activity less than 15 × 10^?3 mmol h^?1 and selectivity for styrene less than 80%) due to the high reducibility of the metals species. However, Ni²⁺ or Fe³⁺ coordinated with the MCM-41 framework, as well as NiO_x and Fe₂O₃ extra-framework species, is continuously oxidized by the CO₂ to maintain the active sites for dehydrogenating ethylbenzene. Deactivation studies on the FeDM sample showed that Fe³⁺ species produced active sp² carbon compounds, which are removed by CO₂; the referred sample is catalytically selective for styrene and stable over 24 h of reaction. In contrast, highly active Ni²⁺ and Ni⁰ species produced a large amount of polyaromatic carbonaceous deposits from styrene, as identified by TPO, TG and Raman spectroscopy. An acid–base mechanism is proposed to operate to adsorb ethylbenzene and abstract the β-hydrogen. CO₂ plays a role in furnishing the lattice oxygen to maintain the Fe³⁺ active sites in the dehydrogenation of ethylbenzene to form styrene.     

[U(bipy)4]: A Mistaken Case of U0?

After more than 50 years, the synthesis and electronic structure of the first and only reported “U⁰ complex” [U(bipy)₄] ( 1 ) has been reinvestigated. Additionally, its one‐electron reduced product [Na(THF)₆][U(bipy)₄] ( 2 ) has been newly discovered. High resolution crystallographic analyses combined with magnetic and computational data show that 1 and its derivative 2 are best described as highly reduced species containing mid‐to‐high‐valent uranium ligated by redox non‐innocent ligands.     

Montecrinanes A–C: Triterpenes with an Unprecedented Rearranged Tetracyclic Skeleton from Celastrus vulcanicola. Insights into Triterpenoid Biosynthesis Based on DFT Calculations

Three new triterpenoids with an unprecedented 6/6/6/6‐fused tetracyclic carbon skeleton, montecrinanes A–C ( 1 – 3 ), were isolated from the root bark of Celastrus vulcanicola, along with known D:B‐friedobaccharanes ( 4 – 6 ), and lupane‐type triterpenes ( 7 – 12 ). The stereostructures of the new metabolites were elucidated based on spectroscopic (1D and 2D NMR) and spectrometric (HR‐EIMS and HR‐ESIMS) techniques. Their absolute configurations were determined by both NMR spectroscopy, with (R)‐(?)‐α‐methoxyphenylacetic acid as a chiral derivatizing agent, and biogenetic considerations. Biogenetic pathways for montecrinane and D:B‐friedobaccharane skeletons were proposed and studied by DFT methods. The theoretical results support the energetic feasibility of the putative biogenetic pathways, in which the 1,2‐methyl shift from the secondary baccharenyl cation represents a novel and key reaction step for a new montecrinane skeleton.     

Metal Oxide Assisted Preparation of Core–Shell Beads with Dense Metal–Organic Framework Coatings for the Enhanced Extraction of Organic Pollutants

Dense and homogeneous metal–organic framework (MOF) coatings on functional bead surfaces are easily prepared by using intermediate sacrificial metal oxide coatings containing the metal precursor of the MOF. Polystyrene (PS) beads are coated with a ZnO layer to give ZnO@PS core–shell beads. The ZnO@PS beads are reactive in the presence of 2‐methylimidazole to transform part of the ZnO coating into a porous zeolitic imidazolate framework‐8 (ZIF‐8) external shell positioned above the internal ZnO precursor shell. The obtained ZIF‐8@ZnO@PS beads can be easily packed in column format for flow‐through applications, such as the solid‐phase extraction of trace priority‐listed environmental pollutants. The prepared material shows an excellent permeance to flow when packed as a column to give high enrichment factors, facile regeneration, and excellent reusability for the extraction of the pollutant bisphenol A. It also shows an outstanding performance for the simultaneous enrichment of mixtures of endocrine disrupting chemicals (bisphenol A, 4‐tert‐octylphenol and 4‐n‐nonylphenol), facilitating their analysis when present at very low levels (<1 μg L^?1) in drinking waters. For the extraction of the pollutant bisphenol A, the prepared ZIF‐8@ZnO@PS beads also show a superior extraction and preconcentration capacity to that of the PS beads used as precursors and the composite materials obtained by the direct growth of ZIF‐8 on the surface of the PS beads in the absence of metal oxide intermediate coatings.