Cascade alkenyl amination/Heck reaction promoted by a bifunctional palladium catalyst: a novel one-pot synthesis of indoles from o-haloanilines and alkenyl halides

A novel approach for the synthesis of the important indole ring is described. Indoles are obtained from o-bromoanilines and alkenyl halides in a Pd-catalyzed cascade process that involves an alkenyl amination followed by an intramolecular Heck reaction. The overall process represents the first example of the participation of alkenyl amination reactions in Pd-catalyzed cascade reactions. Initially, the relative reactivity of aryl and alkenyl bromides and chlorides towards Pd-catalyzed amination was investigated. Competition experiments were carried out in the presence of primary and secondary amines, and these revealed the reactivity order alkenyl bromides > aryl bromides > alkenyl chlorides > aryl chlorides, as well as very high chemoselectivity; the more reactive halide was always favored. Thereafter, optimized reaction conditions for the sequential alkenyl amination/Heck cyclization to give indoles were investigated with the model reaction of o-bromoaniline with alpha-bromostyrene. An extensive screening of ligands, bases, and reaction conditions revealed that the [Pd2(dba)3]/DavePhos, NaOtBu, toluene combination at 100 degrees C were the optimized reaction conditions to carry out the cascade process (dba=dibenzylideneacetone, DavePhos=2-dicyclohexylphosphino-2'-N,N-dimethylaminobiphenyl). The reaction proceeds with aryl, alkyl, and functionalized substitutents in both starting reactants. The cyclization was also studied with N-substituted o-bromoanilines (which would give rise to N-substituted indoles); however, in this case, indole formation occurred only with 1-substituted-2-bromoalkenes. Finally, the application of this methodology to o-chloroanilines required further optimization. Although the catalyst based on DavePhos failed to promote the cascade process, a catalytic combination based on [Pd2(dba)3]/X-Phos promoted the formation of the indole ring also from the less reactive chloroanilines.     

Whey proteins eluted reversed phase gradients

The behavior of bovine whey proteins in Reversed-Phase High Performance Liquid Chromatography (RP-HPLC) systems has been investigated. The Linear Solvent Strength (LSS) model has been applied to the separation of these proteins studying how their retention time and band broadening change when different gradient parameters are modified. From our results it is deduced that the LSS model describes the behaviour of the whey proteins in RP-HPLC. Also, it seems that t_s (the retention time for non-retained solutes) depends on the size of these proteins. The good fit observed between experimental data and the equations deduced from the LSS model allows the prediction of a gradient shape that permits a rapid analysis of the above mentioned proteins.     

New physically adsorbed polymer coating for reproducible separations of basic and acidic proteins by capillary electrophoresis

In this work, a new physically adsorbed coating for capillary electrophoresis (CE) is presented. The coating is based on a N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EPyM) copolymer synthesized in our laboratory. The capillary coating is simple and easy to obtain as only requires flushing the capillary with a polymer aqueous solution for 2 min. It is shown that by using these coated capillaries the electrostatic adsorption of a group of basic proteins onto the capillary wall is significantly reduced allowing their analysis by CE. Moreover, the DMA-EPyM coating provides reproducible separations of the basic proteins with RSD values for migration times lower than 0.75% for the same day (n = 5) and lower than 3.90% for three different days (n = 15). Interestingly, the electrical charge of the coated capillary wall can be modulated by varying the pH of the running buffer which makes possible the analysis of basic and acidic proteins in the same capillary. The usefulness of this coating is further demonstrated via the reproducible separation of whey (i.e. acidic) proteins from raw milk. The coating protocol should be compatible with both CE in microchips and CE-MS of different types of proteins.     

The Role of Intramolecular Hydrogen Bonds vs. Other Weak Interactions on the Conformation of Hyponitrous Acid and Its Mono- and Dithio-Derivatives

High level ab initio and density functional theory calculations have been carried out to investigate the relative stability of the different conformers of hyponitrous acid and its mono- and dithio-derivatives. Geometries and vibrational frequencies were obtained at the B3LYP/6-311+G(d,p) level and final energies through B3LYP/6-311++G(3df,2pd) single point calculations. The reliability of this theoretical scheme has been assessed by comparing these DFT results with those obtained at the G3 level of theory, for some suitable cases. The cis conformers of hyponitrous acid and its mono- and dithio-derivatives are systematically more stable than the trans ones because in the cis conformation a dative interaction between the nitrogen-lone pairs and the σ_NX^* antibonding orbital is significantly favored. Quite interestingly, in general, the conformers presenting an intramolecular hydrogen bond (IHB) are not the global minima of the corresponding potential energy surfaces and only for hyponitrous acid the conformer with a OH ⋅s O IHB is slightly more stable than the cis conformer without IHB. The low stability of the tautomers with IHB is closely related with another weak intramolecular interaction which involves the lone-pairs of the chalcogen atoms and the π_NN^* antibondig orbital, and which is significantly perturbed when the IHB is formed.     

Voltammetric behavior of zaleplon and its differential pulse polarographic determination in capsules

In this work both the electrochemical behavior and the analysis of the hypnotic pyrazolopyrimidine derivative zaleplon were studied. Zaleplon in ethanol-0.1M Britton Robinson buffer solution (30-70) showed 2 irreversible, well-defined cathodic responses in the pH range of 2-12 using differential pulse polarography (DPP), tast polarography, and cyclic voltammetry. From chronocoulometric studies, it was possible to conclude that one electron was transferred in each reduction peak or wave. For analytical purposes, the DPP technique working at pH 4.5 for peak I was selected, which exhibited adequate repeatability, reproducibility, and selectivity. The recovery was 99.97 +/- 1.52%, and the detection and quantitation limits were 5.13 x 10(-7)M and 1.11 x 10(-6)M, respectively. The DPP method was applied successfully to the individual assay of capsules in order to verify the content uniformity of zaleplon. Treatment of the sample is not required because the excipients do not interfere, the method is not time consuming, and it is less expensive than column liquid chromatography.     

Gas-phase interaction of H2S with O2: A kinetic and quantum chemistry study of the potential energy surface

Quantum chemical calculations were carried out to study the interaction of hydrogen sulfide with molecular oxygen in the gas phase. The basic mechanism, the rates of reaction, and the potential energy surface were calculated. Isomers and transition states that connect the reactants with intermediates and products of reaction were identified using the G2 method and B3LYP/6-311+G(3df,2p) functional. Hydrogen abstraction to form HO2 + SH is the dominant product channel and proceeds through a loose transition state well-described at the level of calculation employed. The temperature dependence of the rate coefficient in the range 300-3000 K has been determined on the basis of the ab initio potential energy surface and with variational transition-state theory. The reaction is 169.5 kJ mol(-1) endothermic at 0 K with a rate constant given by 2.77 x 10(5) T(2.76) exp(-19 222/T) cm3 mol(-1) s(-1) and should proceed slowly under atmospheric thermal conditions, but it offers a route to the initiation of H2S combustion at relatively low temperatures.     

Hydrogen bonding in redox-modulated molecular recognition. An experimental and theoretical investigation

Two receptors, a diaminotriazine derivative (DAT) and diamidopyridine (DAP), are complementary to the electroactive naphthalimide (N) through three-point hydrogen bonding. The association constants of the two receptors were evaluated for both the fully oxidized and the radical anion forms of N. In the oxidized state, the two receptors displayed identical binding constants. Diamidopyridine, however, lowers the reduction potential of naphthalimide to a far greater extent than does diaminotriazine, indicating a greater affinity for diamidopyridine by naphthalimide in the radical anion form. This behavior was mirrored by EPR experiments that showed small deviations from the hyperfine coupling pattern of N(red) in the presence of DAT, with greater effects seen for the N(red).DAP complex. Computational simulations using the UB3LYP/6-311+G(d,p)//UHF/6-31G(d) hybrid gave theoretical hyperfine constants in good quantitative agreement with the experimental results. Using this correlation, we determined that electrostatics and hydrogen bond polarizability play key roles in controlling redox-modulated molecular recognition.     

2-Mercaptomethyl-thiazolidines use conserved aromatic–S interactions to achieve broad-range inhibition of metallo-β-lactamases

Infections caused by multidrug resistant (MDR) bacteria are a major public health threat. Carbapenems are among the most potent antimicrobial agents that are commercially available to treat MDR bacteria. Bacterial production of carbapenem-hydrolysing metallo-β-lactamases (MBLs) challenges their safety and efficacy, with subclass B1 MBLs hydrolysing almost all β-lactam antibiotics. MBL inhibitors would fulfil an urgent clinical need by prolonging the lifetime of these life-saving drugs. Here we report the synthesis and activity of a series of 2-mercaptomethyl-thiazolidines (MMTZs), designed to replicate MBL interactions with reaction intermediates or hydrolysis products. MMTZs are potent competitive inhibitors of B1 MBLs in vitro (e.g., K_i = 0.44 μM vs. NDM-1). Crystal structures of MMTZ complexes reveal similar binding patterns to the most clinically important B1 MBLs (NDM-1, VIM-2 and IMP-1), contrasting with previously studied thiol-based MBL inhibitors, such as bisthiazolidines (BTZs) or captopril stereoisomers, which exhibit lower, more variable potencies and multiple binding modes. MMTZ binding involves thiol coordination to the Zn(ii) site and extensive hydrophobic interactions, burying the inhibitor more deeply within the active site than d/l-captopril. Unexpectedly, MMTZ binding features a thioether–π interaction with a conserved active-site aromatic residue, consistent with their equipotent inhibition and similar binding to multiple MBLs. MMTZs penetrate multiple Enterobacterales, inhibit NDM-1 in situ, and restore carbapenem potency against clinical isolates expressing B1 MBLs. Based on their inhibitory profile and lack of eukaryotic cell toxicity, MMTZs represent a promising scaffold for MBL inhibitor development. These results also suggest sulphur–π interactions can be exploited for general ligand design in medicinal chemistry.

Metallo-β-lactamases (MBLs) are major culprits of resistance to carbapenems in bacteria. A series of thiazolidines are potent MBL inhibitors, restoring the activity of carbapenems. Metal binding and sulphur–π interactions are key to inhibition.