Ionic liquid–water mixtures as solvents for poly(N-vinylimidazole)

Ionic liquids extend the Hofmeister series and create a wide range of new possibilities for processes involving salt effects on both soluble and crosslinked systems. This work reports on some mixtures of water with NaCl or an ionic liquid, either 1-ethyl-3-methylimidazolium tosylate or 1-hexyl-3-methylimidazolium chloride, which are better solvents for linear poly(N-vinylimidazole) (L-PVI) than water, i.e., that exhibit a salting-in effect. The intensity of the salt effects was measured on the basis of the polymer solubility, the decrease in polymer–solvent interaction parameter (measured by light scattering), and the increase of coil size (measured through the intrinsic viscosity). It was thus found that the intensity of the salting-in effect of either NaCl or 1-hexyl-3-methylimidazolium chloride on L-PVI is different (larger for the ionic liquid), which denotes that salt effects are not under anion control, and the mechanisms operating in the linear and crosslinked polymers are different. These results are discussed after accounting for the role of ion–polymer interactions.     

Synthesis of Prochiral Imines from Aromatic Ketones Using Magnesium Perchlorate as Catalytic Promotor

We report the synthesis of new prochiral imines by the reaction of nonsymmetric benzophenone derivates, bencylamines, and anilines in good yields. All the products were characterized by ¹H and ¹³C NMR as an isomeric E/Z mixture. Also, the molecular structures for five derivatives determined by single-crystal x-ray experiments are presented.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Screening of Acrylamide of Par-Fried Frozen French Fries Using Portable FT-IR Spectroscopy

Current assays for acrylamide screening rely heavily on LC-MS/MS or GC-MS, techniques that are not suitable to support point of manufacturing verification because it can take several weeks to receive results from a laboratory. A portable sensor that can detect acrylamide levels in real-time would enable in-house testing to safeguard both the safety of the consumer and the economic security of the agricultural supplier. Our objective was to develop a rapid, accurate, and real-time screening technique to detect the acrylamide content in par-fried frozen French fries based on a portable infrared device. Par-fried French fries (n = 70) were manufactured at times ranging from 1 to 5.5 min at 180 °C to yield a wide range of acrylamide levels. Spectra of samples were collected using a portable FT-IR device operating from 4000 to 700 cm⁻¹. Acrylamide was extracted using QuEChERS and quantified using uHPLC-MS/MS. Predictive algorithms were generated using partial least squares regression (PLSR). Acrylamide levels in French fries ranged from 52.0 to 812.8 µg/kg. The best performance of the prediction algorithms required transformation of the acrylamide levels using a logarithm function with models giving a coefficient of correlation (Rcv) of 0.93 and RPD as 3.8, which means the mid-IR model can be used for process control applications. Our data corroborate the potential of portable infrared devices for acrylamide screening of high-risk foods.     

Actinide arene-metalates: ion pairing effects on the electronic structure of unsupported uranium–arenide sandwich complexes

Addition of [UI₂(THF)₃(μ-OMe)]₂·THF (2·THF) to THF solutions containing 6 equiv. of K[C₁₄H₁₀] generates the heteroleptic dimeric complexes [K(18-crown-6)(THF)₂]₂[U(η⁶-C₁₄H₁₀)(η⁴-C₁₄H₁₀)(μ-OMe)]₂·4THF (118C6·4THF) and {[K(THF)₃][U(η⁶-C₁₄H₁₀)(η⁴-C₁₄H₁₀)(μ-OMe)]}₂ (1THF) upon crystallization of the products in THF in the presence or absence of 18-crown-6, respectively. Both 118C6·4THF and 1THF are thermally stable in the solid-state at room temperature; however, after crystallization, they become insoluble in THF or DME solutions and instead gradually decompose upon standing. X-ray diffraction analysis reveals 118C6·4THF and 1THF to be structurally similar, possessing uranium centres sandwiched between bent anthracenide ligands of mixed tetrahapto and hexahapto ligation modes. Yet, the two complexes are distinguished by the close contact potassium-arenide ion pairing that is seen in 1THF but absent in 118C6·4THF, which is observed to have a significant effect on the electronic characteristics of the two complexes. Structural analysis, SQUID magnetometry data, XANES spectral characterization, and computational analyses are generally consistent with U(iv) formal assignments for the metal centres in both 118C6·4THF and 1THF, though noticeable differences are detected between the two species. For instance, the effective magnetic moment of 1THF (3.74 μ_B) is significantly lower than that of 118C6·4THF (4.40 μ_B) at 300 K. Furthermore, the XANES data shows the U L_III-edge absorption energy for 1THF to be 0.9 eV higher than that of 118C6·4THF, suggestive of more oxidized metal centres in the former. Of note, CASSCF calculations on the model complex {[U(η⁶-C₁₄H₁₀)(η⁴-C₁₄H₁₀)(μ-OMe)]₂}²⁻ (1*) shows highly polarized uranium–arenide interactions defined by π-type bonds where the metal contributions are primarily comprised by the 6d-orbitals (7.3 ± 0.6%) with minor participation from the 5f-orbitals (1.5 ± 0.5%). These unique complexes provide new insights into actinide–arenide bonding interactions and show the sensitivity of the electronic structures of the uranium atoms to coordination sphere effects.

Use of Chatt metal-arene protocols with uranium leads to the synthesis of the first well-characterized, unsupported actinide–arenide sandwich complexes. The electronic structures of the actinide centres show a key sensitivity to ion pairing effects.     

Separation of chlorophylls and their degradation products in marine phytoplankton by reversed-phase high-performance liquid chromatography

Summary An RP-HPLC procedure which separates chlorophylls and their degradation products is described. By employing an amonium acetate buffered mobile phase and a linear gradient elution, complex mixtures of chloroand phaeopigments are separated in less than 30 minutes. The method has been applied to the control of chlorophyll enzymatic degradation in cultures of two algal species, and has also been successfully used in the analysis of algal xanthophylls.     

(Trimethylsilylmethyl)tributyltin: A convenient in situ precursor of trimethylsilylmethyllithium

The transmetalation reaction between (trimethylsilylmethyl)tributyltin and $\text{n}$-butyllithium proceeds in quantitative yield at 0°C in a mixture of tetrahydrofuran and hexane to afford trimethylsilylmethyllithium and tetrabutyltin. The methylenation of aldehydes and ketones utilizing this $\text{in situ}$ procedure is demonstrated.     

Photoprotective Potential of Baccharis antioquensis (Asteraceae) as Natural Sunscreen

In the quest for new natural agents of photoprotection, we evaluated the photoprotective and antioxidant activity of B. antioquensis leaf extracts as well as its phenolic composition. The methanolic extract treated with activated carbon showed the highest absorption coefficients for UVA‐UVB radiation, as well as an antioxidant capacity comparable to butylated hydroxy toluene. Furthermore, the formulation containing this extract showed suitable sensorial and photostable characteristics for topical use, and significant values of UVAPF, critical wavelength (λ_c), UVA/UVB ratio and sun protection factor (5.3, 378 nm, 0.78 and 9.1 ± 0.1, respectively). In addition, three glycoside derivatives of quercetin, a kaempferol glycoside and a derivative of caffeic acid were the main polyphenolic compounds identified. These results demonstrate the potential of B. antioquensis extracts to be used as active components of novel, natural sunscreens.     

Rate coefficients for the reactions of C2(a(3)Pi(u)) and C2(X(1)Sigma(g)(+)) with various hydrocarbons (CH4, C2H2, C2H4, C2H6, and C3H8): a gas-phase experimental study over the temperature range 24-300 K

The kinetics of reactions of C2(a(3)Pi(u)) and C2(X(1)Sigma(g)(+)) with various hydrocarbons (CH4, C2H2, C2H4, C2H6, and C3H8) have been studied in a uniform supersonic flow expansion over the temperature range 24-300 K. Rate coefficients have been obtained by using the pulsed laser photolysis-laser induced fluorescence technique, where both radicals were produced at the same time but detected separately. The reactivity of the triplet state was found to be significantly lower than that of the singlet ground state for all reactants over the whole temperature range of the study. Whereas C2(X(1)Sigma(g)(+)) reacts with a rate coefficient close to the gas kinetic limit with all hydrocarbons studied apart from CH4, C2(a(3)Pi(u)) appears to be more sensitive to the molecular and electronic structure of the reactant partners. The latter reacts at least one order of magnitude faster with unsaturated hydrocarbons than with alkanes, and the rate coefficients increase very significantly with the size of the alkane. Results are briefly discussed in terms of their potential astrophysical impact.     

Differential structure of the Thompson components of selfadjoint operators

Different equivalence relations are defined in the set of selfadjoint operators of a Hilbert space in order to extend a very well known relation in the cone of positive operators. As in the positive case, for the equivalence class admits a differential structure, which is compatible with a complete metric defined on . This metric coincides with the Thompson metric when is positive.