Interaction between model poly(ethylene terephthalate) thin films and weakly ionised oxygen plasma

Model films of poly(ethylene terephthalate) were treated by oxygen plasma in order to quantify the etching rate and estimate the contribution of charged and neutral particles to the reaction probability. Model films with a thickness of 50 nm were deposited on a quartz crystal of a microbalance (QCM) by spin‐coating technique. The samples were exposed to oxygen plasma with the positive ion density of 4 × 10¹⁵ m^?3 and neutral oxygen atom density of 6 × 10²¹ m^?3. The etching rate was determined from the QCM signal and was 4.7 nm s^?1. The etching was found rather inhomogeneous as the atomic force microscopic images showed an increase of the surface roughness as a result of plasma treatment. The model films were completely removed from the surface of the quartz crystals in about 12 s. Knowing the etching rate and the flux of oxygen atoms to the surface allowed for calculation of the reaction probability which was found to be rather low at the value of 1.6 × 10^?4. Copyright © 2011 John Wiley & Sons, Ltd.     

High Performance Liquid Chromatography/Electrochemistry/High Resolution Electrospray Ionization‐Mass Spectrometry (HPLC/EC/HR ESI‐MS) Characterization of Selected Cytokinins Oxidation Products

Electrochemistry combined with mass spectrometry represents an emerging analytical technique used to study the oxidation pathway of various drugs and in vivo occurring compounds, continuously showing a capability to generate many known metabolites or new oxidation products. An on‐line HPLC/EC/HR ESI‐MS method had been used to investigate the oxidation of selected cytokinin compounds. This setup allowed rapid identification and general structure elucidation of the obtained products. An electrochemical oxidation of isopentenyladenine resulted in five products, including hydroxylated and dehydrogenated products, which correlates very well with its in vivo metabolism. Electrochemical conversion of trans‐zeatin revealed six products, with two dehydrogenation products corresponding to its in vivo occurring metabolites. cis‐Zeatin oxidation in the electrochemical cell gave rise to eight products, resembling similarity to trans‐zeatin oxidation. All three compounds underwent a complete turnover mainly through two oxidation reactions occurring in the electrochemical cell? dehydrogenation and a less typical aliphatic hydroxylation. The resulting products are in correlation with their known in vivo metabolism.     

Use of ZSM-5 catalyst in deoxygenation of waste cooking oil

This study investigated the potential use of waste cooking oil (WCO) in the production of engine fuels and valuable chemicals via catalytic cracking. WCO was processed in its pure form and in a mixture with hydrotreated vacuum gas oil (HVGO). Catalytic cracking experiments were performed using a microactivity test (MAT) (simulation of the fluid catalytic cracking environment). In cracking over the standard fluid catalytic cracking equilibrium catalyst (FCC-ECAT), the oxygen contained in the feed was consumed in the formation of CO and CO₂, water and into oxygenated organic compounds (phenolics, esters, carboxylic acids, etc.), which were found in the organic phase of the liquid product. In order to remove the unwanted organic oxygenates, the catalytic system based on pure FCC-ECAT was modified by addition of the ZSM-5-based FCC catalyst. By using the mixture containing FCC-ECAT and 10 mass % of FCC-ZSM-5, it was possible to reduce the amount of organic oxygenates to almost the feasible minimum when cracking pure WCO. The effect of the catalyst mixture on cracking the feed mixture of the vacuum gas oil with 10 vol. % of WCO was manifested in the practically zero formation of organic oxygenates and in a gasoline yield comparable with vacuum gas oil (VGO) cracking.     

Quantification of measurement uncertainty in the sequential determination of <Superscript>210</Superscript>Pb and <Superscript>210</Superscript>Po by liquid scintillation counting and alpha-particle spectrometry

Methodologies for the quantification of measurement uncertainties associated with the determination of ²¹⁰Pb- and ²¹⁰Po-specific activities by liquid scintillation counting (LSC) and alpha-particle spectrometry are presented, and are demonstrated using the soil reference material IAEA-326. Major contributors to the combined uncertainty associated with the measurement result of ²¹⁰Pb were the uncertainties of net count rates in the ²¹⁰Pb energy region of the sample spectrum and in the ²¹⁰Bi energy region of the blank spectrum. The predominant sources of uncertainty in the measurement of ²¹⁰Po were the uncertainties of net count rates in the regions of interest of ²⁰⁹Po and ²¹⁰Po. The relative standard uncertainty of ²¹⁰Po exponentially increases with the time interval between the sampling date and the separation date of Po, and this effect is strongly dependent on the ²¹⁰Po/²¹⁰Pb activity ratio. When the specific activity of ²¹⁰Pb is much higher than that of ²¹⁰Po in the sample, the relative standard uncertainty of the ²¹⁰Po determination increases significantly within a short time interval between the sampling date (or reference date) and the separation date of Po in samples.     

Experimental and Theoretical Evidence of Spin-Orbit Heavy Atom on the Light Atom 1H NMR Chemical Shifts Induced through H⋅⋅⋅I− Hydrogen Bond

Spin-orbit (SO) heavy-atom on the light-atom (SO-HALA) effect is the largest relativistic effect caused by a heavy atom on its light-atom neighbors, leading, for example, to unexpected NMR chemical shifts of ¹H, ¹³C, and ¹⁵N nuclei. In this study, a combined experimental and theoretical evidence for the SO-HALA effect transmitted through hydrogen bond is presented. Solid-state NMR data for a series of 4-dimethylaminopyridine salts containing I⁻, Br⁻ and Cl⁻ counter ions were obtained experimentally and by theoretical calculations. A comparison of the experimental chemical shifts with those calculated by a standard DFT methodology without the SO contribution to the chemical shifts revealed a remarkable error of the calculated proton chemical shift of a hydrogen atom that is in close contact with the iodide anion. The addition of the relativistic SO correction in the calculations significantly improves overall agreement with the experiment and confirms the propagation of the SO-HALA effect through hydrogen bonds.     

Low-density polyethylene in mixtures of hexane and benzene derivates

Preferential sorption, equilibrium swelling degree, and volume of the swollen membrane in systems low-density polyethylene + hexane + aromatic compound (benzene, methylbenzene, or ethylbenzene) were studied using gravimetric and dilatometric methods at the temperature of 25 °C. Aromatic compounds are preferentially sorbed in low-density polyethylene compared to hexane. Experimental volume changes of the membrane were found to be noticeably different from those calculated on the basis of mass sorption data under the assumption of additivity. This difference points to the existence of the interactions between the polymer and the surrounding liquid mixture. The volume swelling degree curves are close to each other in the whole concentration range of the binary liquid mixture (hexane + aromatics) suggesting that the attractive forces between the polymer chains are the deciding factor limiting the volume expansion of the membrane in all three systems to the same extent.     

Mechanical properties of silica hydrogels prepared and aged at physiological conditions: testing in the compression mode

The mechanical properties for silica hydrogel prepared at physiological conditions are reported in this paper. The mechanical testing was performed in the compression mode determining the mechanical characteristics as a function of aging time in TRIS buffer up to 14 days. In addition to a typically used gradient method for Young’s modulus determination from the stress–strain curves, a new phenomenological model was proposed to describe the experimental data. The mechanical properties were stabilized after 2 days of aging, which was concluded from an increase in Young’s modulus between 90 and 400 kPa, an increase in stress at break between 50 and 100 kPa and by a decrease in relative deformation at break from 0.26 to 0.16. The height of samples was constant in the first three days of aging followed by a decrease by ~20%. Dissolving of silica hydrogel characterized through determination of silica content in TRIS buffer employing the molybdenum method was not found to be responsible for this phenomenon. The phenomenological model is proposed to be used for a reliable evaluation of mechanical properties of silica as well as other hydrogels exhibiting low Young’s modulus.     

The relationship between the mercury concentration in fish muscles and scales/fins and its significance

The determination of mercury in fish typically involves analysis of muscles. For predicting the concentration of mercury in fish muscle on the basis of the analysis of fish scales or fins, the relationship between total mercury concentrations in fish muscles and in fish scales and fins was studied. Mercury content in fish muscles, scales and fins was determined by atomic absorption spectrometry with thermal decomposition of the sample in a flow of oxygen. A number of scale treatments were applied in order to remove impurities and to enhance the prediction quality. For scale treatment, 40 min of washing with DI water in an ultrasonic bath is recommended. A coefficient of determination r²= 0.93 for the relationship between Hg concentrations in muscles and scales was achieved for 40 fish among the different fish species tested (European bream, perch, roach) from the Hamry Reservoir, Czech Republic. With respect to fin sampling, the coefficient of determination r² for these fish was 0.86. The analysis of fish scales and caudal fins is a useful screening tool for assessing the relative mercury contamination of monitored fish. The method of sampling scales is not suitable for fish species with small scales such as brown trout.      

Semi-synthetic polysaccharide sulfates as anticoagulant coatings for PET, 1--cellulose sulfate

In the present study, blood-compatible PET surfaces were prepared by coating with anticoagulant cellulose sulfates that were synthesized homogeneously in ionic liquids. The adsorption behavior of polysaccharides on PET films was investigated using QCM-D. It was demonstrated that pre-coating with different amino-group-containing polysaccharides improves the affinity toward cellulose sulfate. Moreover, the effect of different degrees of sulfation on the adsorption process was evaluated. Based on these results, several layer-by-layer coated PET foils were prepared that showed significantly improved blood compatibility compared to the initial untreated material.