Synthesis and characterization of an aliphatic monoimide-bridged polysilsesquioxane by the sol–gel route

Based on differential scanning calorimetry data, it was shown that the reaction of (3-triethoxysilylpropyl)succinic anhydride and (3-amino)propyltriethoxysilane at 110 °C resulted in the formation of polyamic acid, whereas the thermal treatment at 220 °C led to the generation of an aliphatic monoimide-bridged polysilsesquioxane as proved by FT-IR. X-ray powder diffraction studies showed a prominent reflection at 2θ = 6.66° (d = 1.32 nm) revealing that a crystalline area is formed. ²⁹Si CP-MAS-NMR and ¹³C CP-TOSS-MAS-NMR measurements proved that no cleavage of the Si–C bond occurred, and a highly condensed material was obtained.     

Synthesis of room-temperature ionic liquids with the weakly coordinating [Al(ORF)4]- anion (RF=C(H)(CF3)2) and the determination of their principal physical properties

A large series of ionic liquids (ILs) based on the weakly coordinating alkoxyaluminate [Al(hfip)(4)](-) (hfip: hexafluoroisopropoxy) with classical as well as functionalized cations were prepared, and their principal physical properties determined. Melting points are between 0 ([C(4)MMIM][Al(hfip)(4)]) and 69 °C ([C(3)MPip][Al(hfip)(4)]); three qualify as room-temperature ILs (RTILs). Crystal structures for six ILs were determined; their structural parameters and anion-cation contacts are compared here with known ILs, with a special focus on their influence on physical properties. Moreover, the biodegradability of the compounds was investigated by using the closed-bottle and the manometric respirometry test. Temperature-dependent viscosities and conductivities were measured between 0 and 80 °C, and described by either the Vogel-Fulcher-Tammann (VFT) or the Arrhenius equations. Moreover, conductivities and viscosities were investigated in the context of the molecular volume, V(m). Physical property-V(m) correlations were carried out for various temperatures, and the temperature dependence of the molecular volume was analyzed by using crystal structure data and DFT calculations. The IL ionicity was investigated by Walden plots; according to this analysis, [Al(hfip)(4)](-) ILs may be classified as "very good to good ILs"; while [C(2)MIM][Al(hfip)(4)] is a better IL than [C(2)MIM][NTf(2)]. The dielectric constants of ten [Al(hfip)(4)](-) ILs were determined, and are unexpectedly high (ε(r)=11.5 to 16.8). This could be rationalized by considering additional calculated dipole moments of the structures frozen in the solid state by DFT. The determination of hydrogen gas solubility in [Al(hfip)(4)](-) RTILs by high-pressure NMR spectroscopy revealed very high hydrogen solubilities at 25 °C and 1 atm. These results indicate the significant potential of this class of ILs in manifold applications.     

Guanidinium Alkynesulfonates with Single‐Layer Stacking Motif: Interlayer Hydrogen Bonding Between Sulfonate Anions Changes the Orientation of the Organosulfonate R Group from “Alternate Side” to “Same Side”

Hydrolyses of HC?CSO₃SiMe₃ ( 1 ) and CH₃C?CSO₃SiMe₃ ( 2 ) lead to the formation of acetylenic sulfonic acids HC?CSO₃H?2.33 H₂O ( 3 ) and CH₃C?CSO₃H?1.88 H₂O ( 4 ). These acids were reacted with guanidinium carbonate to yield [⁺C(NH₂)₃][HC?CSO₃^?] ( 5 ) and [⁺C(NH₂)₃][CH₃C?CSO₃^?] ( 6 ). Compounds 1 – 6 were characterized by spectroscopic methods, and the X‐ray crystal structures of the guanidinium salts were determined. The X‐ray results of 5 show that the guanidinium cations and organosulfonate anions associate into 1D ribbons through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions, whereas association of these ions in 6 is achieved through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) and ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) interactions. The ribbons in 5 associate into 2D sheets through ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{3\hfill \atop 6\hfill}}}$ (12) rings, whereas those in 6 are connected through ${{\rm R}{{1\hfill \atop 2\hfill}}}$ (6) and ${{\rm R}{{2\hfill \atop 2\hfill}}}$ (8) dimer interactions and ${{\rm R}{{4\hfill \atop 6\hfill}}}$ (14) rings. Compound 6 exhibits a single‐layer stacking motif similar to that found in guanidinium alkane‐ and arenesulfonates, that is, the alkynyl groups alternate orientation from one ribbon to the next. The stacking motif in 5 is also single‐layer, but due to interlayer hydrogen bonding between sulfonate anions, the alkynyl groups of each sheet all point to the same side of the sheet.     

Indoline-3-carboxylic acid derived organocatalysts for the anti-Mannich reaction

Mannich type reactions of a preformed aldimine with various carbonyl compounds were investigated with a series of functionalised indoline derivatives as catalysts: indoline‐3‐carboxylic acid, the diphenylcarbinol analogue and O‐protected silyl ether analogues. All compounds were readily prepared in enantiopure form by using an enzymatic kinetic resolution as a key step (E?100). The alcohol and ether catalysts failed to induce complete chirality transfer but did afford the Mannich bases in good yields and high diastereomeric ratios, whereas the acid catalyst gave the products in a highly diastereo‐ and enantioselective manner. The absolute configuration of the products was determined by a syn–anti isomerisation protocol, initiated by the sterically demanding base 1,8‐diazabicyclo[5.4.0]undec‐7‐ene.     

Synthesis of the core structure of the lipoteichoic acid of Streptococcus pneumoniae

Streptococcus pneumoniae LTA is a highly complex glycophospholipid that consists of nine carbohydrate residues: three glucose, two galactosamine and two 2‐acetamino‐4‐amino‐2,4,6‐trideoxygalactose (AATDgal) residues that are each differently linked, one ribitol and one diacylated glycerol (DAG) residue. Suitable building blocks for the glucose and the AATDgal residues were designed and their synthesis is described in this paper. These building blocks permitted the successful synthesis of the core structure Glcβ(1‐3)AATDgalβ(1‐3)Glcα(1‐O)DAG in a suitably protected form for further chain extension ( 1 b , 1 c ) and as unprotected glycolipid ( 1 a ) that was employed in biological studies. These studies revealed that 1 a as well as 1 lead to interleukin‐8 release, however not via TLR2 or TLR4 as receptor.     

ADLOC: An Aptamer‐Displacement Assay Based on Luminescent Oxygen Channeling

Functional nucleic acids, such as aptamers and allosteric ribozymes, can sense their ligands specifically, thereby undergoing structural alterations that can be converted into a detectable signal. The direct coupling of molecular recognition to signal generation enables the production of versatile reporters that can be applied as molecular probes for various purposes, including high‐throughput screening. Here we describe an unprecedented type of a nucleic acid‐based sensor system and show that it is amenable to high‐throughput screening (HTS) applications. The approach detects the displacement of an aptamer from its bound protein partner by means of luminescent oxygen channeling. In a proof‐of‐principle study we demonstrate that the format is feasible for efficient identification of small drug‐like molecules that bind to a protein target, in this case to the Sec7 domain of cytohesin. We extended the approach to a new cytohesin‐specific single chain DNA aptamer, C10.41, which exhibits a similar binding behavior to cytohesins but has the advantage of being more stable and easier to synthesize and to modify than the RNA‐aptamer M69. The results obtained with both aptamers indicate the general suitability of the aptamer‐displacement assay based on luminescent oxygen channelling (ADLOC) for HTS. We also analyzed the potential for false positive hits and identified from a library of 18 000 drug‐like small molecules two compounds as strong singlet‐oxygen quenchers. With full automation and the use of commercially available plate readers, we estimate that the ADLOC‐based assay described here could be used to screen at least 100 000 compounds per day.     

Transition‐Metal‐Free Formal Sonogashira Coupling and α‐Carbonyl Arylation Reactions

Transition‐metal‐free formal Sonogashira coupling and α‐carbonyl arylation reactions have been developed. These transformations are based on the nucleophilic aromatic substitution (S_NAr) of β‐carbonyl sulfones to electron‐deficient aryl fluorides, producing a key intermediate that, depending on the reaction conditions, gives the aromatic alkynes or α‐aryl carbonyl compounds. The development of these reactions is presented and, based on investigations under basic and acidic conditions, mechanisms have been proposed. To develop the formal Sonogashira coupling further, a milder, two‐step protocol is also disclosed that expands the reaction concept. The scope of these reactions is demonstrated for the synthesis of Sonogashira and α‐carbonyl arylated products from a range of electron‐deficient aryl fluorides with a variety of functional groups and aryl‐, heteroaryl‐, alkyl‐, and alkoxy‐substituted sulfone nucleophiles. These transition‐metal‐free reactions complement the metal‐catalyzed versions in terms of substitution patterns, simplicity, and reaction conditions.     

Sample cleanup-free determination of mycophenolic acid and its glucuronide in serum and plasma using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry

Mycophenolic acid (MPA) is an immunosuppressant drug which powerfully inhibits lymphocyte proliferation. Since the early 1990s it has been used to prevent rejection in organ transplantation. The requirement of therapeutic drug monitoring shown in previous studies raises the necessity of acquiring accurate and sensitive methods to measure MPA and its major metabolite mycophenolic acid glucuronide (MPAG).The authors developed a sample cleanup-free, rapid, and highly specific method for simultaneous measurement of MPA and MPAG in human plasma and serum using the novel technology of ultra-performance liquid chromatography-electrospray ionization tandem mass spectrometry. MPA- and MPAG-determinations were performed during a 2.0-min run time. Multiple calibration curves for the analysis of MPA and MPAG exhibited consistent linearity and reproducibility in the range of 0.05-100 (r > 0.999) mg L⁻¹ and 4-4000 mg L⁻¹ (r > 0.999), respectively. Limits of Detection were 0.014 mg L⁻¹ for MPA and 1.85 mg L⁻¹ for MPAG. Lower Limits of Quantification were 0.05 mg L⁻¹ for MPA and 2.30 mg L⁻¹ for MPAG. Interassay imprecision was <10% for both substances. Mean recovery was 103.6% (range 78.1-129.7%) for MPA and 111.1% (range 73.0-139.6%) for MPAG. Agreement was good for MPA and MPAG between the presented method and a validated HPLC-MS/MS method. The Passing-Bablok regression line for MPA and MPAG was HPLC-MS/MS = 1.14 UPLC-MS/MS—0.14 [mg L⁻¹], r = 0.96, and HPLC-MS/MS = 0.77 UPLC-MS/MS + 0.50 [mg L⁻¹], r = 0.97, respectively. This sample cleanup-free and robust LC-MS/MS assay facilitates the rapid, accurate and simultaneous determination of MPA and MPAG in human body fluids.     

Experimental and Theoretical Conformational Analysis of 5‐Benzylimidazolidin‐4‐one Derivatives – a ‘Playground’ for Studying Dispersion Interactions and a ‘Windshield‐Wiper’ Effect in Organocatalysis

The PF₆ salts of 5‐benzyl‐1‐isopropylidene‐ and 5‐benzyl‐1‐cinnamylidene‐3‐methylimidazolidin‐4‐ones 1 (Scheme) with various substituents in the 2‐position have been prepared, and single crystals suitable for X‐ray structure determination have been obtained of 14 such compounds, i.e., 2 – 10 and 12 – 16 (Figs. 2–5). In nine of the structures, the Ph ring of the benzyl group resides above the heterocycle, in contact with the cis‐substituent at C(2) (staggered conformation A ; Figs. 1–3); in three structures, the Ph ring lies above the iminium π‐plane (staggered conformation B ; Figs. 1 and 4); in two structures, the benzylic C? C bond has an eclipsing conformation ( C ; Figs. 1 and 5) which places the Ph ring simultaneously at a maximum distance with its neighbors, the CO group, the N?C‐π‐system, and the cis‐substituent at C(2) of the heterocycle. It is suggested by a qualitative conformational analysis (Fig. 6) that the three staggered conformations of the benzylic C? C bond are all subject to unfavorable steric interactions, so that the eclipsing conformation may be a kind of ‘escape’. State‐of‐the‐art quantum‐chemical methods, with large AO basic sets (near the limit) for the single‐point calculations, were used to compute the structures of seven of the 14 iminium ions, i.e., 3, 4 / 12, 5 – 7, 13 , and 16 (Table) in the two staggered conformations, A and B , with the benzylic Ph group above the ring and above the iminium π‐system, respectively. In all cases, the more stable computed conformer (‘isolated‐molecule’ structure) corresponds to the one present in the crystal (overlay in Fig. 7). The energy differences are small (≤2 kcal/mol) which, together with the result of a potential‐curve calculation for the rotation around the benzylic C? C bond of one of the structures, 16 (Fig. 8), suggests that the benzyl group is more or less freely rotating at ambident temperatures. The importance of intramolecular London dispersion (benzene ring in ‘contact’ with the cis‐substituent in conformation A ) for DFT and other quantum‐chemical computations is demonstrated; the benzyl‐imidazolidinones 1 appear to be ideal systems for detecting dispersion contributions between a benzene ring and alkyl or aryl CH groups. Enylidene ions of the type studied herein are the reactive intermediates of enantioselective organocatalytic conjugate additions, Diels–Alder reactions, and many other transformations involving α,β‐unsaturated carbonyl compounds. Our experimental and theoretical results are discussed in view of the performance of 5‐benzyl‐imidazolidinones as enantioselective catalysts.